MAAM26100-B1 GaAs MMIC Power Amplifier 3.0 - 6.4 GHz Rev. V6 Functional Diagram 3,4 Features • • • • • • Saturated Power: 30.5 dBm Typical Gain: 19 dB Typical Power Added Efficiency: 30% DC Decoupled RF Input and Output Lead-Free 7-Lead Ceramic Package RoHS* Compliant and 260°C Reflow Compatible VDD 1000 pF 1000 pF 6 4 5 3 Description The MAAM26100-B1 is a GaAs MMIC two stage high efficiency power amplifier in a small, lead-free, 7-lead ceramic package. The MAAM26100-B1 is a fully monolithic design which eliminates the need for external circuitry in 50-ohm systems. 7 RF IN 2 The MAAM26100-B1 is ideally suited for driver amplifiers and transmitter outputs in UMTS applications, test equipment, electronic warfare jammers, missile subsystems and phased array radars. The MAAM26100-B1 is fabricated using a mature 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. Absolute Maximum Ratings 1,2 Parameter Absolute Maximum VDD +9 V VGG -6 V to -3 V RF Input Power +17 dBm Channel Temperature 150°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device and will void product warranty. 2. M/A-COM does not recommend sustained operation near these survivability limits. RF OUT 1 VGG 3. Nominal bias is obtained by first connecting –5 volts to pin 1 (VGG), followed by connecting +8 volts to pin 5 (VD1) and pin 4 (VD2). Note sequence. 4. RF ground and thermal interface are the case bottom. Adequate heat sinking is required. Pin Configuration Pin No. Function Pin No. Function 1 VGG 5 VD1 2 RF Output 6 Internal Ground 3 Internal Ground 7 RF Input 4 VD2 Ordering Information Part Number Package MAAM26100-B1 7 lead, Ceramic (CR-2) MAAM26100-B1G 7 lead, Ceramic (CR-2) with Gull Wing * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM26100-B1 GaAs MMIC Power Amplifier 3.0 - 6.4 GHz Rev. V6 Electrical Specifications: TA = 25°C, VDD = +8 V, VGG = -5 V, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Small Signal Gain 2 - 6 GHz dB 15 19 — Input VSWR Input Power +14 dBm, 2 - 6 GHz Ratio — 1.7:1 2.1:1 Output VSWR Input Power +14 dBm, 2 - 6 GHz Ratio — 2.2:1 — Saturated Output Power Input Power +14 dBm, 2 - 6 GHz dBm 29 30.5 — Output Power at 1 dB Gain Compression 2 - 6 GHz dBm — 27 — Power Added Efficiency — % — 30 — Third Order Intercept 2 - 6 GHz dBm — 39 — Reverse Isolation 2 - 6 GHz dB — 30 — IDSQ No RF mA — 390 — IDS Input Power +14 dBm mA 300 475 650 Input Power +14 dBm mA — 10 — — °C/W — 16.5 — IGG Thermal Resistance 5 5. Attachment method not included. Lead-Free CR-2† † Lead-Free CR-2 w/ Gull Wing † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.