MUSBR Rugged USB Product Specification S6056C Rev 1.1 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. MUSBR-A111-30 SERIES A, RIGHT ANGLE STANDARD PROFILE Related Products MUSB/MUSBR OPTIONS: MUSBR-A111-40 SERIES A, RIGHT ANGLE LOW PROFILE With matching USB With Cable Header Overview This Product Specification defines the general use and performance parameters for Amphenol’s MUSBR series of connectors. With Terminal Block Availability: Series A right angle connectors are available now. Vertical PCB mount connectors will be available Q3, 2012. Mini-B and series Mini-AB with right angle and vertical PCB tails are coming soon. Right angle connectors mounted on a PCB with matching USB, cable headers or terminal blocks are available for all series. Dust covers for enhanced mating area protection are also available. Usage These connectors meet Military shock & vibration levels and IP68 per IEC 60529 in mated and unmated conditions. The connector system is designed to provide a standard USB interface for enclosures exposed to harsh environments. Connectors mate with any standard USB 2.0 plug. Achieves data rates up to 480 Mb/s (USB 2.0). With PCB for wiring Applications Intended for use in applications such as: Medical equipment Microwave transmitters GPS, positioning equipment Military vehicles, radios, computers Revision date: May 02, 2012 Test equipment Mobile entertainment systems Traffic control & monitoring systems Page 1 of 3 About Amphenol Commercial Products Amphenol’s commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. Related Products MDBR 9 POSITION CONNECTOR SHOWN MUSBK Connector Electrical Characteristics Parameter Current rating: Contact resistance: Insulation resistance: DWV: Series A & B 1.5A per contact 30 mΩ max 1000 MΩ min 500V AC @ sea level Series Mini-B & Mini-AB 1.0A per contact 50 mΩ max 100 MΩ min 100V AC @ sea level Connector Mechanical Characteristics Thermal Shock: 5 cycles @ -40° to +125° C Physical Shock: Per EIA364-27 Condition H (11ms 30G) Humidity: Per EIA364-31 Condition C, method III Vibration: Per EIA364-28 per Condition V, Letter A Salt spray: Per EIA364-26, 250 Hrs Process Characteristics Recommended soldering process: Hand or wave soldering peaked at 260°C for 8 seconds max. Recommended Torque for #4-40 or M3 Panel Mount Screws: 0.45 to 0.65 Nm (4 – 5.75 in-lbs). Recommended Torque for #2-56 or M2.5 Panel Mount Screws: 0.23 to 0.34 Nm (2 - 3 in-lbs). Solder tails suitable for PCB thickness of 1.52mm (.062”) Mating Cycles: 1500 (Series A & B) 5000 (Series Mini-B & Mini-AB) Material Requirements MUSBR connectors are RoHS compliant. Unless otherwise specified, the materials for each component shall be: Contacts: Phosphor Bronze with 30µ” (0.76µm) min Gold over 50µ” (1.27µm) min Nickel Housing: Engineering thermoplastic, UL94V-0 rated, Black. White for series B. Shell: Die cast Zinc alloy, Nickel plating Temperature rise: Meets the requirement of 30° C ΔT Operating temperature -40° to +105° C MUSB-K152-30 SERIES MICRO-AB RIGHT ANGLE, PCB TAIL MRJR Available Documents Drawing Numbers: P-MUSBR-A111-XX P-MUSBR-A511-XX MUSBR rugged Series A, Right Angle PCB Tail, Thread, Shell & Dust Cover Options MUSBR rugged Series A, Right Angle, Vertical PCB Mount Contact factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations Quality Test Reports QTR9300491 Qualification Test Report MRJR-5380-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 Revision date: May 02, 2012 Page 2 of 3 S6056C Rev 1.1 Product Numbering System MUSBR MUSBR - A 1 1 1 - 3 0 Connector series designation - Rugged USB Style A - Receptacle series A, single Termination 1 - Right angle PCB tail 2 - Right angle PCB tail, on PCB with right angle cable header, note 1 3 - Right angle PCB tail, on PCB with matching USB termination, note 2 4 - Right angle PCB tail, on PCB with terminal block(s), note 3 5 - Vertical PCB tail 8 - Right angle PCB tail, on PCB with vertical cable header, note 4 A - Right angle PCB tail, on PCB for hand wiring E - Right angle PCB, on PCB, with vertical USB termination, note 4 Number of Contacts 1 - Standard 4 per port Colour 1 - Black - Standard Options 0 - No rear shield; shell with Unified National thread, note 5 & 6 3 - With rear shield; shell with Unified National thread, note 5 & 6 4 - Low profile; with rear shield ;shell with Unified National thread, note 5&6 M - With rear shield; shell with Metric thread, note 5 & 7 N - No rear shield, shell with Metric thread, notes 5 & 7 R – Low profile; with rear shield; shell with Metric thread, note 5 & 7 Dust Cover Options 0 - Standard (no dust cover) 1 - With grey color dust cover (supplied bulk packed) 4 – Standard (no dust cover), note 8 5 - With black color dust cover (supplied bulk packed) Unique Special Code No Digit – Standard part defined by previous 10 digits 1 to 9 - Unique special feature. Note 9 Notes 1) Design of right angle cable header varies depending upon the style. Refer to drawing for details. 2) Matching USB is the same USB series as the rugged connector 3) Design of terminal blocks varies depending upon the style. Refer to drawing for details. 4) Vertical headers & vertical matching USB’s may not be readily available for all connector styles. 5) Rear shield required for styles A, C & D with right angle PCB tails. Rear shield optional for styles B & E with right angle PCB tails. No rear shield for any vertical PCB tail. 6) Use #4-40 UNC for styles A, C & D and #2-56 UNC for styles B & E 7) Metric thread - use M3 for styles A, C, & D and M2.5 for styles B & E Amphenol Canada Corp. 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 +1 416 291 4401 8) Dust cover option code 4 is identical to code 0 and may be used for styles B & E only. 9) Many unique features are readily available to suit customer requirements. Consult with Amphenol Canada for details. Page 3 of 3 Copyright © Amphenol Corporation 2012 • All rights reserved www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.