Catalog 1308961 Issued 6-01 OJ/OJE series 3-10 Amp Miniature, PC Board Relay Appliances, HVAC, Industrial Control. UL File No. E82292 CSA File No. LR48471 VDE File No. 10080 TUV File No. R75081 Coil Data @ 20°C Features • • • • • • Miniature size 18.2 x 10.2 x 14.7h. 1 Form A (SPST-NO) contact arrangement. Designed to meet UL, CSA, VDE, TUV requirements. Designed to meet 4kV dielectric between coil and contacts (OJ). Sensitive and standard coils available. Immersion cleanable, sealed version available. Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO). Material: Ag, Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @5VDC. Initial Contact Resistance: 100 milliohms @ 1A,6VDC. Contact Ratings Ratings: OJ/OJE-LM: 3A @ 250VAC resistive, 3A @ 28VDC resistive. OJ/OJE-LMH: 8A @ 250VAC resistive, 8A @ 28VDC resistive. OJ/OJE-DM: 5A @ 250VAC resistive, 5A @ 28VDC resistive. OJ/OJE-HM: 10A @ 250VAC resistive, 10A @ 28VDC resistive. Max. Switched Voltage: AC: 265V. DC: 30V. Max. Switched Power: OJ/OJE-LM: 720VA, 90W OJ/OJE-LMH: 1,800VA, 200W OJ/OJE-DM: 1,200VA, 150W OJ/OJE-HM: 2,500VA, 280W OJ/OJE-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) 3 5 6 9 12 24 66.7 40.0 33.3 22.5 16.7 8.6 Coil Resistance (ohms) ± 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 45 125 180 400 720 2,800 2.25 3.75 4.50 6.75 9.00 18.00 0.15 0.25 0.30 0.45 0.60 1.20 OJ/OJE-D and -H Standard Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) ± 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 3 5 6 9 12 24 48 150.0 91.0 75.0 50.0 37.5 18.8 9.4 20 55 80 180 320 1,280 5,100 2.10 3.50 4.20 6.30 8.40 16.80 33.60 0.15 0.25 0.30 0.45 0.60 1.20 2.40 Operate Data Must Operate Voltage: OJ/OJE -L: 75% of nominal voltage or less. OJ/OJE -D and -H: 70% of nominal voltage or less. Must Release Voltage: OJ/OJE -L: 5% of nominal voltage or more. OJ/OJE -D and -H: 5% of nominal voltage or more. Operate Time: OJ/OJE -L: 15 ms max. OJ/OJE -D and -H: 10 ms max. Release Time: 4 ms max. Initial Dielectric Strength Between Open Contacts: OJ: 750VAC 50/60 Hz. (1 minute). OJE: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: OJ: 4,000VAC 50/60 Hz. (1 minute). OJE: 3,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: OJ: 10,000V (1.2/50µs). OJE: 5,000V (1.2/50µs). Environmental Data Temperature Range: Operating: OJ/OJE-L: -30°C to +80°C OJ/OJE-D and -H: -30°C to +60°C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Mechanical Data Voltage: 3 to 48VDC. Nominal Power: OJ/OJE-LM and LMH: 200 mW. OJ/OJE-DMand HM: 450 mW. Coil Temperature Rise: OJ/OJE-LM and LMH : 30°C max., at rated coil voltage. OJ/OJE-DM and HM: 40°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OJ/OJE-SS: Vented (Flux-tight), plastic cover. OJ/OJE-SH: Sealed, plastic case. Weight: 0.32 oz (9g) approximately. 16 Tyco Electronics Harrisburg, PA U.S.A. Dimensions (for reference purposes only) are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Technical Support: 1-800-522-6752 http://relays.tycoelectronics.com Catalog 1308961 OJ/OJE Series Relays Issued 6-01 Ordering Information Typical Part Number B OJE -SS -1 12 L M 1. Basic Series: OJ = 4kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 5. Coil Input/Contact Rating: L = Sensitive (200mW) Coil, 3A Contacts** 48 = 48VDC D = Standard (450mW) Coil, 5A Contacts H = Standard (450mW) Coil, 10A Contacts 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. High Capacity Contact Rating Option for Sensitive Coil: H = 8A Contacts (Only available with Coil Input/Contact Rating code "L"). * Not suitable for immersion cleaning processes. ** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information. Wiring Diagram (Bottom View) Outline Dimensions .58 ± .02 (14.7 ± .5) .157 ± .012 (4.00 ± .3) .012 (.3) .018 x .018 (.45 x .45) .300 ± .008 (7.62 ± .2) PC Board Layout (Bottom View) .039 (1.0) .039 (1.0) .012 (.3) 4 – .05 DIA (1.3) .067 (1.71) .401 ± .02 (10.2 ± .5) .300 ± .004 (7.6 ± .1) .067 (1.71) .500 ± .008 (12.70 ± .2) .500 ± .004 (12.7 ± .1) .1 ± .008 (2.54 ± .2) .716 ± .02 (18.2 ± .5) .100 ± .004 (2.54 ± .1) Reference Data Coil Temperature Rise Operate Time 60 12 50 10 40 8 Life Expectancy 100 30 20 Operation (x 104) Time (msec) Temp. Rise (°C) HM type, 120VAC Res. 6 Operate Time 4 LMH type, 250VAC Res. 10 LM type, 250VAC Res. 2 10 DM type, 250VAC Res. Release Time 0.1 0.2 0.3 0.4 0.5 Coil Power (W) 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 1 0.7 0 1 2 3 4 5 6 7 8 9 10 Contact Current (A) Coil Power (W) Test relay: OJE-SH-112LMH 17 Tyco Electronics Harrisburg, PA U.S.A. Dimensions (for reference purposes only) are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. Technical Support: 1-800-522-6752 http://relays.tycoelectronics.com