Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) OEG PCE series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 VDE File No. 6175 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • Small, low profile package, 10 Amp switching capacity. • 1 Form A and 1 Form C contact arrangements. • UL Class F (155°C) insulation system standard • Immersion cleanable, sealed version available. • Applications include appliance, HVAC, security system, garage opener control, emergency lighting. Voltage: 6 to 48VDC. Nominal Power: 360 mW Coil Temperature Rise: 35°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20°C PCE Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy, AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) ± 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 6 9 12 24 48 60 40 30 15 7 100 225 400 1,600 6,400 4.50 6.75 9.00 18.00 36.00 0.30 0.45 0.60 1.20 2.40 Contact Ratings Ratings: 10A @ 250VAC resistive, 10A @ 120VAC resistive, 10A @ 28VDC resistive. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 10 ms max. Release Time: 5 ms max. 3A @ 250VAC inductive (cosø= 0.4), 3A @ 120VAC inductive (cosø= 0.4), 3A @ 28VDC inductive (L/R=7msec). Environmental Data Temperature Range: Operating: -30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Max. Switched Voltage: AC: 250V. DC: 28V. Max. Switched Current: 10A. Max. Switched Power: 2,500VA, 280W. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 4,000V (1.2 / 50µs). Mechanical Data Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): PCE: Sealed plastic case with knock-off nib for ventilation Weight: 0.32 oz (11g) approximately. Reference Data Coil Temperature Rise Operate Time Life Expectancy 100 12 160 120 100 80 Cool Coil 60 Hot Coil 10A Applied 40 28VDC Resistive 10 Pick-Up Voltage Operate Time 4 Maximum Allowable Coil Voltage Operation (x 10 ) Operating Votage Range Time (msec) 140 Time (msec) % of Supplying Voltage to Coil 180 8 6 4 10 240VAC Resistive 2 20 Release Time 1 0 -30 -10 10 30 50 70 90 110 130 150 0.1 Ambient Temp. (°C) 0.2 0.3 0.4 0.5 0.6 0.7 0 2 4 6 8 10 12 Contact Current (A) Coil Power (W) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for 436 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) OEG Ordering Information Typical Part Number B PCE -1 24 D 1 M ,000 1. Basic Series: PCE = Miniature Power PC board relay. 2. Termination: 1 = 1 pole 3. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Material: 1 = AgCdO 2 = AgSnO 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Enclosure: Blank = Flux-tight plastic case. H = Sealed plastic case with knock-off nib for ventilation 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCE-112D1H,000 PCE-124D1H,000 PCE-112D1MH,000 PCE-124D1MH,000 Wiring Diagram (Bottom View) Outline Dimensions .646 ± .02 (16.4 ± .5) .016 (.4) .138 ± .012 (3.5 ± .3) .012 (.3) .016 (.4) .039 (1.0) .039 (1.0) .039 (1.0) .016 (.4) .866 ± .02 (22.0 ± .5) PC Board Layout (Bottom View) .47 ± .008 (12.0 ± .2) .079 ± .008 (2.0 ± .2) .48 ± .008 (12.2 ± .2) .63 ± .02 (16.0 ± .5) .216 ± .008 (5.5 ± .2) .472 ± .004 (12.0 ± .1) .079 ± .008 (2.0 ± .2) .48 ± .004 (12.2 ± .1) 5 – .05 DIA (1.3) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. .270 MAX. (6.85) .916 MAX. (23.35) .167 MAX. (4.25) .660 MAX. (16.75) .016 TYP. (.40) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 437 Refer to inside back cover.