HDSP-G01x, HDSP-G03x 10.16 mm (0.4 inch) Dual Digit General Purpose Seven-Segment Display Data Sheet Description Features This 10.16 mm (0.4 inch) LED dual digit seven-segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. Industry standard size Applications Suitable for indoor use Not recommended for industrial application, i.e., operating temperature requirements exceeding +85°C or below –25°C[1] Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Avago sales office or an authorized distributor. Industry standard pinout 10.16 mm (0.4 inch) DIP lead on 2.54 mm Choice of colors High Efficiency Red (HER), Green, AlGaAs Red and Yellow Excellent appearance Evenly lighted segments gray package gives optimum contrast ± 50° viewing angle Design flexibility Common anode or common cathode Categorized for luminous intensity Green and yellow categorized for color Devices HER Green AlGaAs Red Yellow Description HDSP-G01E HDSP-G01G HDSP-G01A HDSP-G01Y Common Anode HDSP-G03E HDSP-G03G HDSP-G03A HDSP-G03Y Common Cathode Part Numbering System 5082 - X X X X-X X X X X HDSP- X X X X - X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Datasheet Package[1] G: 10 mm (0.4 inch) Dual Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions FRONT VIEW SIDE VIEW 10.16 (0.400) 4.16 (0.164) 8° 16.00 10.16 (0.630) (0.400) 1.10 (0.043) 12.70 (0.500) 16.00 (0.630) 0.70 (0.028) PIN 1 5.90 (0.232) 6.90 (0.272) 20.20 (0.795) TOP END VIEW 20.20 (0.795) DATE CODE F DIG.2 A A G E HDSP-XXXX YWW XZ COO B C D F G E B C D COUNTRY OF ORIGIN LUMINOUS INTENSITY CATEGORY COLOR BINNING (NOTE 3) ∅ 0.51 (0.019) 2.54 x 7 (0.100) DIMENSIONS ARE IN MILLIMETERS (INCHES). 3 DIG.1 NOTE: DECIMAL POINTS WILL NOT BE LIGHTED UP Internal Circuit Diagram COMMON ANODE 4 COM A 15 B 13 C 1 D 3 5 COM E 2 F 14 G 16 A 10 B 12 C 8 D 6 E 7 F 11 G 9 E 7 F 11 G 9 HDSP-G01E/G01G/G01Y/G01A PIN No. CONNECTION 1 CATHODE C (DIGIT 1) 2 CATHODE E (DIGIT 1) 3 CATHODE D (DIGIT 1) 4 COMMON ANODE (DIGIT 1) 5 COMMON ANODE (DIGIT 2) 6 CATHODE D (DIGIT 2) 7 CATHODE E (DIGIT 2) 8 CATHODE C (DIGIT 2) 9 CATHODE G (DIGIT 2) 10 CATHODE A (DIGIT 2) 11 CATHODE F (DIGIT 2) 12 CATHODE B (DIGIT 2) 13 CATHODE B (DIGIT 1) 14 CATHODE F (DIGIT 1) 15 CATHODE A (DIGIT 1) 16 CATHODE G (DIGIT 1) COMMON CATHODE 4 COM A 15 B 13 C 1 D 3 5 COM E 2 F 14 G 16 A 10 B 12 C 8 D 6 HDSP-G03E/G03G/G03Y/G03A 4 PIN No. CONNECTION 1 ANODE C (DIGIT 1) 2 ANODE E (DIGIT 1) 3 ANODE D (DIGIT 1) 4 COMMON CATHODE (DIGIT 1) 5 COMMON CATHODE (DIGIT 2) 6 ANODE D (DIGIT 2) 7 ANODE E (DIGIT 2) 8 ANODE C (DIGIT 2) 9 ANODE G (DIGIT 2) 10 ANODE A (DIGIT 2) 11 ANODE F (DIGIT 2) 12 ANODE B (DIGIT 2) 13 ANODE B (DIGIT 1) 14 ANODE F (DIGIT 1) 15 ANODE A (DIGIT 1) 16 ANODE G (DIGIT 1) Absolute Maximum Ratings at TA = 25°C Description HER HDSP-G0xE Green HDSP-G0xG AlGaAs Red HDSP-G0xA Yellow HDSP-G0xY Units Power Dissipation Segment 65 65 30 52 mW Forward Current Segment 25[1] 25[2] 15[3] 20[4] mA Peak Forward Current per Segment (1/10 Duty Factor at 10 KHz) 100 100 80 80 mA Operating Temperature Range –35 to +85 –35 to +85 –35 to +85 –35 to +85 °C Storage Temperature Range –35 to +85 –35 to +85 –35 to +85 –35 to +85 °C Reverse Voltage per Segment or DP 5 5 5 5 V 250 250 250 °C Wave Soldering Temperature for 3 seconds 250 (at 2 mm Distance from the Body) Notes: 1. Derate above 25°C at 0.33 mA/°C. 2. Derate above 25°C at 0.33 mA/°C. 3. Derate above 25°C at 0.2 mA/°C. 4. Derate above 25°C at 0.27 mA/°C. Electrical/Optical Characteristics at TA = 25°C High Efficiency Red (HER) Device HDSPG01E G03E Parameter Symbol Luminous Intensity/Segment IV Min. Typ. 1.25 1.19 2.60 Max. 2.40 Units Test Conditions mcd mcd IF = 5 mA IF = 10 mA V IF = 20 mA Forward Voltage VF 2.05 Peak Wavelength PEAK 635 nm Dominant Wavelength d 620 nm Reverse Voltage VR 5 Parameter Symbol Min. Typ. Luminous Intensity/Segment IV 1.25 3.20 Forward Voltage VF 180 2.05 2.25 V IR = 100 A Units Test Conditions mcd IF = 10 mA V V IF = 10 mA IF = 20 mA Green Device HDSPG01G G03G 5 Max. 2.60 Peak Wavelength PEAK 568 nm Dominant Wavelength d 573 nm Reverse Voltage VR 5 V IR = 100 A AlGaAs Red Device HDSPG01A G03A Parameter Symbol Luminous Intensity/Segment IV Min. Typ. 3.20 3.66 6.50 Max. 2.00 Units Test Conditions mcd mcd IF = 5 mA IF = 10 mA V IF = 20 mA Forward Voltage VF 1.85 Peak Wavelength PEAK 660 nm Dominant Wavelength d 643 nm Reverse Voltage VR 5 Parameter Symbol Min. Typ. Luminous Intensity/Segment IV 0.80 0.77 1.50 V IR = 100 A Units Test Conditions mcd mcd IF = 5 mA IF = 10 mA V IF = 20 mA Yellow Device HDSPG01Y G03Y Max. Forward Voltage VF 2.15 2.60 Peak Wavelength PEAK 595 nm Dominant Wavelength d 590 nm Reverse Voltage VR 5 V IR = 100 A Intensity Bin Limits (mcd at 10 mA) Bin Name HER/Green Yellow AlGaAs Red Min.[1] Max.[1] Min.[1] Max.[1] Min.[1] Max.[1] G NA NA 0.801 1.250 NA NA H 1.251 2.000 1.251 2.000 NA NA I 2.001 3.200 2.001 3.200 NA NA J 3.201 5.050 NA NA 3.201 5.050 K NA NA NA NA 5.051 8.000 L NA NA NA NA 8.001 12.650 Note: 1. Tolerance for each bin limit is ± 10%. Color Bin Limits (nm at 10 mA) Dominant Wavelength (nm) Color Bin Min.[1] Max.[1] Green 3 569.1 571.0 4 571.1 573.0 5 573.1 575.0 1 585.5 588.5 2 588.5 591.5 3 591.5 594.5 Yellow Note: 1. Tolerance for each bin limit is 1 nm. 6 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA High Efficiency Red (HER) 30 HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 TA – AMBIENT TEMPERATURE – °C 2.5 3.0 3.5 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 Figure 2. Forward current vs. forward voltage. 2.5 2.0 1.5 1.0 0.5 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 3. Relative luminous intensity vs. DC forward current. 7 1.5 VF – FORWARD VOLTAGE – V Figure 1. Maximum allowable average or DC current vs. ambient temperature. 0 1.0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Green 30 GAP GREEN 25 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 TA – AMBIENT TEMPERATURE – °C 2.0 2.5 3.0 3.5 Figure 6. Forward current vs. forward voltage. 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 3.5 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 1.5 VF – FORWARD VOLTAGE – V Figure 5. Maximum allowable average or DC current vs. ambient temperature. 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 7. Relative luminous intensity vs. DC forward current. 8 1.0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. 16 AIGaAs RED 14 12 10 8 6 4 2 0 0 20 40 60 80 100 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA AlGaAs Red 120 100 80 60 40 20 0 0 0.5 TA – AMBIENT TEMPERATURE – °C 2.5 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 Figure 10. Forward current vs. forward voltage. 3.0 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 11. Relative luminous intensity vs. DC forward current. 9 1.5 VF – FORWARD VOLTAGE – V Figure 9. Maximum allowable average or DC current vs. ambient temperature. 0 1.0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. 25 YELLOW 20 15 10 5 0 0 20 40 60 80 100 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Yellow 120 100 80 60 40 20 0 0 0.5 TA – AMBIENT TEMPERATURE – °C Figure 13. Maximum allowable average or DC current vs. ambient temperature. 1.5 2.0 2.5 3.0 3.5 Figure 14. Forward current vs. forward voltage. 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 3.5 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 1.0 VF – FORWARD VOLTAGE – V 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 15. Relative luminous intensity vs. DC forward current. For product information and a complete list of distributors, please go to our web site: 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-3314EN AV02-3641EN - June 20, 2012