AVAGO HDSP

HDSP-311x, HDSP- 313x
10.16 mm (0.4 inch) Single Digit General Purpose
Seven Segment Display
Data Sheet
Description
Features
This 10.16 mm (0.4 inch) LED single digit seven segment
display uses industry standard size package and pinout.
The device is available in either common anode or
common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray
face displays are suitable for indoor use.
 Industry standard size
Applications
 Suitable for indoor use
 Not recommended for industrial application, i.e.,
operating temperature requirements exceeding +85° C
or below -25° C [1]
 Extreme temperature cycling not recommended
Note:
1. For additional details, please contact your local Avago sales office or
an authorized distributor.
 Industry standard pinout
– 10.16 mm (0.4 inch) character height
– DIP lead on 2.54 mm
 Choice of colors
– High Efficiency Red (HER), Green, AlGaAs Red, and
Yellow
 Excellent appearance
– Evenly lighted segments gray package gives
optimum contrast
– ± 50 ft. viewing angle
 Design flexibility
– Common anode right hand decimal point or
common cathode right hand decimal point
 Categorized for luminous intensity
– Green and yellow categorized for color
Devices
HER
Green
AlGaAs Red
Yellow
Description
Package Drawing
HDSP-311E
HDSP-311G
HDSP-311A
HDSP-311Y
Common Anode Right Hand Decimal
A
HDSP-313E
HDSP-313G
HDSP-313A
HDSP-313Y
Common Cathode Right Hand Decimal
B
Part Numbering System
5082 - x xx x - x x x xx
HDSP - x xx x - x x x xx
Mechanical Options [1]
00: No Mechanical Option
Color Bin Options [1,2]
0: No Color Bin Limitation
Maximum Intensity Bin [1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin [1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color [1]
A: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration [1]
Refer to Respective Datasheet
Package [1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply).
Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
Package Drawing A
TOP END VIEW
FRONT VIEW
COUNTRY
OF ORIGIN
8°
PIN 1
5.51
(0.220)
COLOR
BINNING
(NOTE 3)
0.50
(0.020)
18.75
(0.738)
HDSP-XXXX
YWW XZ COO
+
10.16
(0.400)
1.20
(0.047)
‡1.4
(0.55)
2.54 x 6
(0.100)
LUMINOUS
INTENSITY
CATEGORY
4.10
(0.161)
DATE CODE
5.54
(0.218)
SIDE VIEW
9.80
(0.386)
A
0.60
(0.020)
F
G
E
5.10
(0.201)
B
C
D
DP
0.30
(0.012)
7.62
(0.300)
NOTE: NO PINS 4, 5, 6, AND 12
DIMENSIONS IN MILLIMETERS (INCHES)
3
Package Dimensions
Package Drawing B
FRONT VIEW
RIGHT SIDE
COUNTRY
OF ORIGIN
6.00
(0.236)
LUMINOUS
INTENSITY
CATEGORY
10.00°
COLOR BIN
2.54 ± 0.38
(0.100)
10.00
(0.394)
1.85
(0.073)
‡1.20
(0.047)
HDSP-XXXX
YWW XZ COO
0.90
(0.035)
12.80 ± 0.25
(0.504)
4 x 2.54
(0.400)
0.50 ± 0.05
(0.02)
6.40 ± 0.25
(0.252)
7.00 ± 0.25
(0.276)
TOP SIDE
DATE
CODE
10.40 MIN.
(0.409)
9.70 ± 0.25
(0.382)
A
3.90
(0.153)
F
G
E
B
C
D
DP
0.30 ± 0.05
(0.012)
7.62 ± 0.38
(0.300)
4
DIMENSIONS IN MILLIMETERS (INCHES)
Internal Circuit Diagram
COMMON ANODE RIGHT HAND DECIMAL
HDSP-311E/311G/311Y/311A
3.14 COM
A
1
B
13
C
10
D
8
E
7
F
2
G
11
DP
9
PIN No.
CONNECTION
1
CATHODE A
2
CATHODE F
3
COMMON ANODE
7
CATHODE E
8
CATHODE D
9
CATHODE DP
10
CATHODE C
11
CATHODE G
13
CATHODE B
14
COMMON ANODE
PINS 4, 5, 6, 12: NO PIN
COMMON CATHODE RIGHT HAND DECIMAL
HDSP-313E/313G/313Y/313A
3.8 COM
A
10
5
B
9
C
7
D
5
E
4
F
2
G
1
DP
6
PIN NO.
CONNECTION
1
ANODE G
2
ANODE F
3
COMMON CATHODE
4
ANODE E
5
ANODE D
6
ANODE DP
7
ANODE C
8
COMMON CATHODE
9
ANODE B
10
ANODE A
Absolute Maximum Ratings at TA = 25° C
Description
HER
HDSP-31xE
Green
HDSP-31xG
AlGaAs Red
HDSP-31xA
Yellow
HDSP-31xY
Power Dissipation Segment
65
65
30
52
mW
Forward Current Segment
25 [1]
25 [2]
15 [3]
20 [4]
mA
Peak Forward Current per Segment
(1/10 Duty Factor at 10 kHz)
100
100
80
80
mA
Operating Temperature Range
-35 to +85
-35 to +85
-35 to +85
-35 to +85
°C
Storage Temperature Range
-35 to +85
-35 to +85
-35 to +85
-35 to +85
°C
Reverse Voltage per Segment or DP
5
5
5
5
V
Wavesoldering Temperature for 3 Seconds
(at 2 mm Distance from the Body)
250
250
250
250
°C
Units
Note:
1. Derate above 25° C at 0.33 mA/°C.
2. Derate above 25° C at 0.33 mA/°C.
3. Derate above 25° C at 0.2 mA/°C.
4. Derate above 25° C at 0.27 mA/°C.
Electrical/Optical Characteristics at TA = 25° C
High Efficiency Red (HER)
Device
HDSP311E
313E
Parameter
Symbol
Luminous Intensity/Segment
IV
Min.
Typ.
Max.
1.49
1.25
Units
Test Conditions
mcd
IF = 5 mA
IF = 10 mA
3.20
Forward Voltage
VF
2.05
Peak Wavelength
PEAK
635
2.40
V
nm
Dominant Wavelength
d
620
nm
Reverse Voltage
VR
5
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment
IV
1.25
3.20
Forward Voltage
VF
IF = 20 mA
V
IR = 100 A
Units
Test Conditions
mcd
IF = 10 mA
V
IF = 10 mA
Green
Device
HDSP311G
313G
2.06
1.80
Peak Wavelength
6
PEAK
Dominant Wavelength
d
Reverse Voltage
VR
Max.
2.25
568
573
5
IF = 20 mA
2.60
nm
nm
V
IR = 100 A
AlGaAs Red
Device
HDSP311A
313A
Parameter
Symbol
Luminous Intensity/Segment
IV
Min.
Typ.
Max.
4.54
3.20
Units
Test Conditions
mcd
IF = 5 mA
IF = 10 mA
7.50
Forward Voltage
VF
1.85
2.00
V
Peak Wavelength
PEAK
660
nm
Dominant Wavelength
d
643
nm
Reverse Voltage
VR
5
Parameter
Symbol
Min.
Luminous Intensity/Segment
IV
Forward Voltage
VF
2.15
Peak Wavelength
PEAK
595
IF = 20 mA
V
IR = 100 A
Units
Test Conditions
mcd
IF = 5 mA
V
IF = 20 mA
Yellow
Device
HDSP311Y
313Y
Typ.
0.86
0.80
Dominant Wavelength
d
Reverse Voltage
VR
Max.
IF = 10 mA
1.50
2.60
nm
590
nm
5
V
IR = 100 A
Intensity Bin Limits (mcd at 10 mA)
HER/Green
Yellow
AlGaAs Red
Bin Name
Min. [1]
Max. [1]
Min. [1]
Max. [1]
Min. [1]
Max. [1]
G
NA
NA
0.801
1.250
NA
NA
H
1.251
2.000
1.251
2.000
NA
NA
I
2.001
3.200
2.001
3.200
NA
NA
J
3.201
5.050
NA
NA
3.201
5.050
K
NA
NA
NA
NA
5.051
8.000
L
NA
NA
NA
NA
8.001
12.650
Note:
1. Tolerance for each bin limit is ± 10%.
Color Bin Limits (nm at 10 mA)
Dominant Wavelength (nm)
Color
Bin
Min.
Max.
Green
3
569.1
571.1
4
571.1
573.1
5
573.1
585.5
1
585.5
588.5
2
588.5
591.5
3
591.5
594.5
Yellow
Note:
1. Tolerance for each bin limit is 1 nm.
7
30
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
High Efficiency Red (HER)
HIGH EFFICIENCY RED (HER)
25
20
15
10
5
0
0
20
40
60
80
TA – AMBIENT TEMPERATURE – °C
120
100
80
60
40
20
100
Figure 1. Maximum allowable average or DC current vs. ambient
temperature.
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 10 mA)
0.5
1.0
1.5
2.0
2.5
VF – FORWARD VOLTAGE – V
3.0
3.5
1.4
2.0
1.5
1.0
0.5
0
5
10
15
20
25
30
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 3. Relative luminous intensity vs. DC forward current.
8
0
Figure 2. Forward current vs. forward voltage.
2.5
0
0
35
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA
Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak
current.
30
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
Green
GAP GREEN
25
20
15
10
5
0
0
20
40
60
80
TA – AMBIENT TEMPERATURE – °C
80
60
40
20
0
0
3.0
1.2
2.5
1.0
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 7. Relative luminous intensity vs. DC forward current.
0.5
1.0
1.5
2.0
2.5
VF – FORWARD VOLTAGE – V
3.0
3.5
Figure 6. Forward current vs. forward voltage.
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZEDTO 1 AT 10 mA)
100
100
Figure 5. Maximum allowable average or DC current vs. ambient
temperature.
9
120
35
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45
IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA
50
Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak
current.
16
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
AlGaAs Red
AIGaAs RED
14
12
10
8
6
4
2
0
0
20
40
60
80
TA – AMBIENT TEMPERATURE – °C
80
60
40
20
0
0
3.0
1.2
2.5
1.0
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 11. Relative luminous intensity vs. DC forward current.
0.5
1.0
1.5
VF – FORWARD VOLTAGE – V
2.0
2.5
Figure 10. Forward current vs. forward voltage.
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 10 mA)
100
100
Figure 9. Maximum allowable average or DC current vs. ambient
temperature.
10
120
35
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45
IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA
50
Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak
current.
25
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
Yellow
YELLOW
20
15
10
5
0
0
20
40
60
80
TA – AMBIENT TEMPERATURE – °C
100
80
60
40
20
100
Figure 13. Maximum allowable average or DC current vs. ambient
temperature.
0
0
3.5
1.4
3.0
1.2
2.5
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 15. Relative luminous intensity vs. DC forward current.
0.5
1.0
1.5
2.0
2.5
VF – FORWARD VOLTAGE – V
3.0
3.5
Figure 14. Forward current vs. forward voltage.
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZEDTO 1 AT 10 mA)
120
35
1.0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45
IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA
50
Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak
current.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5988-2969EN
AV02-3585EN - June 11, 2012