MA-COM BE-500G-1

AC Current Sensor
HARTMAN Aerospace Power Products
BE-500G-1 3PST N.O., 50 Amps, 120 VAC
Features:
• 3PST N.O. Main Contacts
• Overload Current Sensing
• 120 VAC
• 50 Amps
• High Reliability
• Meets many requirements of MIL-R-6106
Features:
• Overload Current Sensing
CONTACTOR CONFIGURATION
Dimensions for this product are expressed in inches.
Multiply values by 25.4 for millimeters.
PRODUCT SPECIFICATIONS
Construction
Main Contacts:
Configuration
Voltage (Nominal)
Current (Resistive)
Auxiliary Switches:
Configuration
Voltage (Nominal)
Current
Resistive
Inductive
Lamp
Coil Data:
Duty Cycle
Voltage (Nominal)
Pick-Up Voltage
Drop-Out Voltage
Coil Current @ 28 VDC & +25°C
In-Rush
Hold
Operating Temperature
Life:
Electrical
Mechanical
Weight
Continuous Current
Trip Point - Three Phase
Trip Point - Single Phase
Catastrophic Trip
Gasket Sealed, Vented
3PST N.O.
120/208 VAC, 400 Hz
50 Amps
5-SPDT
28 VDC
Notes:
5 Amps
3 Amps
2 Amps
Continuous
28 VDC
18 VDC Maximum
1 - 9 VDC
3.4 Amps Maximum
1 Amp Maximum
-54°C to +71°C
50,000 Cycles Minimum
100,000 Cycles Minimum
9 Lb.4 Oz.
50 Amps
50.5 - 60 Amps
69.0 Amps Max.
500 Amps ±10%
For factory-direct application assistance, contact the HARTMAN
product team at (419) 521-9500, Fax (419) 526-2749.
© 2004 by Tyco Electronics Corporation. All Rights Reserved.
HARTMAN and TYCO are trademarks.
Catalog (web doc only)
Revised 5-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967