MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Features Rev. V4 FP-2 (MD-189) • • • • Operates Over Full PCN/PCS/PHS/MSS Bands Low Conversion Loss Fully Hermetic Package Intermodulation Ratio Insensitive to System Mismatches • VSWR: <2.0:1 Typical Midband • Isolation: 35 dB Typical Midband • High IIP3 (+28 dBm Typical 1-3500 MHz) Description M/A-COM’s MD-189 and MDS-189 are high level termination insensitive mixers. These devices are packaged in 8-lead flatpack and SMT packages. These mixers offer consistent and repeatable flat intermodulation performance and flat conversion loss with low spurious signal generation independent of system mismatch from 1 to 3500 MHz. The MD-189 and MDS-189 are ideally suited for RF/IF communications applications requiring high intercept point performance. SF-1 (MDS-189) Pin Configuration (MD-189) Pin No. Function Pin No. Function 1 GND 5 LO 2 GND 6 GND 3 GND 7 GND 4 IF 8 RF Pin Configuration (MDS-189) Pin No. Function Pin No. Function 1 GND 3 LO 2 IF 4 RF Absolute Maximum Ratings 1 Parameter Max Input Power Total Power LO Power 1 Absolute Maximum 2 0.5W Derated to 85oC @ 3.2 mW/oC +27 dBm 1. Operation of this device above any one of these parameters nay cause permanent damage. 2. Ambient Temperature (TA) = +25oC ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Rev. V4 Electrical Specifications1: TA = -55°C to +85°C Frequency: RF, LO Ports = 1-3500 MHz, IF Port = 5-1500 MHz Parameter Test Conditions Frequency Units Min Typ Max Conversion Loss LO @ 23 dBm IF @ 60 MHz 5 - 1000 MHz 1000 - 3000 MHz 1 - 3500 MHz dB dB dB — — — 6.5 7.5 8.0 7.0 8.5 9.5 Isolation LO to RF 1 - 2000 MHz 2000 - 3500 MHz dB dB 30 25 35 30 — — LO to IF 1 - 2000 MHz 2000 - 3500 MHz dB dB 25 20 30 25 — — RF to IF 10 - 500 MHz 1 - 3500 MHz dB dB 30 15 35 20 — — Input Compression (1 dB) LO @ 23 dBm IF @ 60 MHz — — — +20 — IIP3 LO @ 23 dBm IF @ 60 MHz — dBm — +28 — Desensitivity (1dB) LO @ 23 dBm IF @ 60 MHz — — dBm dBm — — +17 — — SSB Noise Figure LO @ 23 dBm IF @ 60 MHz Within 1 dB of Conversion Loss Max — — — — — Bottom View of SF-1 4X .016 ± .002 .506 4X .099 ± .010 6X .050 (+.020/-.000) Typical Performance Curves .385 Ref .220 .381 .165 .510 Ref .430 .367 .305 .143 .205 .080 .000 .002 .002 .000 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD- / MDS-189 High Level Termination Insensitive Mixer, 1 - 3500 MHz Rev. V4 Typical Performance Curves Ordering Information Part Number Package MD-189 PIN FP-2 MDS-189 PIN SF-1 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.