MABA-009484-ETC31T E-Series RF 3:1 Transformer 2-500 MHz M/A-COM Products Rev. V2 Product Image Features • • • • • 3:1 Impedance Ratio Surface Mount Tape and reel packaging available 260°C Reflow Compatible RoHS* compliant Description M/A-COM’s MABA-009484-ETC31T is a RoHS Compliant 3:1 RF flux coupled transformer in a low cost, surface mount package. Typical applications include single to balanced mode conversion. The MABA-009484-ETC31T is available in a SM-22 surface mount package and is designed to be utilized in both RoHS and standard reflow profiles. Parts are packaged in tape & reel. Ordering Information Part Number Package MABA-009484-ETC31T Tape and Reel (2000 piece Reel) Pin Configuration Electrical Specifications: TA = 25°C, Z0 = 50Ω Typ Max Pin No. Function — — — 1 Secondary Dot — — 0.7 0.6 2 1 2 Secondary CT 3 Secondary dB — 0.3 1 4 Primary 2 - 500 Degrees — — 1 5 Primary Dot 2 - 400 400-500 dB dB 20 16 27 18 30 25 Parameter Test Conditions Frequency Units Min RF Frequency — 2 - 500 MHz Insertion Loss — 2 - 500 5-300 dB dB Amplitude Imbalance — 2 - 500 Phase Imbalance — Input Return Loss — Absolute Maximum Ratings Parameter Schematic Absolute Maximum RF Power 250 mW DC Current 240 mA2 Operating Temperature -40°C to +85°C Storage Temperature -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MABA-009484-ETC31T E-Series RF 3:1 Transformer 2-500 MHz M/A-COM Products Rev. V2 Typical Performance Curves at +25°C SM – 22 Package dB Insertion Loss 0 -0.5 -1 -1.5 -2 -2.5 -3 0 100 200 300 400 500 300 400 500 MHz Amplitude Balance dB 1 0.5 0 -0.5 0 100 200 MHz ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. D egree Phase Balance 5 3 1 -1 -3 -5 0 100 200 300 400 500 MHz Input Return Loss 0 dB -10 -20 -30 -40 0 100 200 300 400 500 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.