XC221A Series ETR1201_002 1.2V Input / Output Rail To Rail CMOS Op Amp ■GENERAL DESCRIPTION The XC221A series is an input / output rail to rail CMOS Op Amp. With rail to rail functions, operation is guaranteed from power supplies as low as 1.2V. Moreover, since the XC221A series comes in an ultra small SOT-25 package, the series is particularly suited for use with various types of portable phones. Bandwidths of 550kHz and slew rates of 0.5V can be achieved even with power consumption as low as 100μA. Even with large capacitance levels of CL = 200pF (unity gain connection), the XC221A series will not be susceptible to oscillation. ■APPLICATIONS ■FEATURES ●Palmtop computers, PDAs Operating Voltage Range:1.2 ~ 10V (single cell) :±0.6 ~ 5V (+ve/-ve supply) ●Cellular and portable phones ●Portable audio systems ●Various battery powered systems Output Signal :0.1~2.9V (3V single cell, RL=2kΩ) Gain Bandwidth :550kHz (15μA: 210kHz) Slew Rate :0.5V/μs High Capacitance Load :CL=200pF Low Supply Current :100μA, 15μA Input / Output Rail To Rail Operation Package :SOT-25 Environmentally Friendly:EU RoHS Compliant, Pb Free ■PIN CONFIGURATION ■PIN ASSIGNMENT PIN NUMBER 1 SYMBOL FUNCTION VOUT Output Pin 2 VDD Positive Power Supply Pin 3 IN+ Positive Input 4 IN- Negative Input 5 VSS Negative Power Supply Pin 1/9 XC221A Series ■PRODUCT CLASSIFICATION ●Ordering Information XC221A①②③④⑤⑥-⑦(*1) DESIGNATOR DESCRIPTION SYMBOL ① The Number of Channels 1 One channel ② Supply Current 1 15μA 2 100μA (*1) DESCRIPTION ③ Internal Standard Number 0 Fixed ④ Load Capacitance 0 200pF Packages Taping Type (*2) MR ⑤⑥-⑦ MR-G SOT-25 SOT-25 (Halogen & Antimony free) The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant. The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or representative. (Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦) (*2) ■ABSOLUTE MAXIMUM RATINGS Ta = 25℃, VSS = 0V PARAMETER SYMBOL RATINGS UNITS VDD Pin Voltage VDD -0.3 ～ 12.0 V OUT Pin Voltage IN Pin Voltage VOUT VIN+ -0.3 ～ 12.0 -0.3～VDD+0.3 V V IN/ Pin Voltage VIN- -0.3～VDD+0.3 V OUT Pin Current IOUT ±100 mA Power Dissipation Pd 150 mW Operating Temperature Range Topr -30 ～ +80 ℃ Storage Temperature Range Tstg -40 ～ +125 ℃ RAIL-TO-RAIL is a trademark of Motorola. 2/9 XC221A Series ■ELECTRICAL CHARACTERISTICS XC221A1100 PARAMETER IDD =15μA SYMBOL CONDITIONS Ta = 25℃ UNITS MIN. TYP. MAX. 1.2 - 10.0 V VDD = 3V VDD = 1.2V 10 2.5 75 15 8 1 1 1 110 23 23 20.0 - μA μA mV pA pA TΩ dB 60 75 - dB 60 60 0.05 0.10 0.10 0.10 0.10 - 75 75 210 0.07 Supply Voltage VDD Supply Current IDD Input Offset Voltage Input Offset Current Input Bias Current Input Resistance Large Signal Voltage Gain Common Mode Rejection Ratio Power Supply Rejection Ratio VOF IOF IB RIN AVD CMRR 0≦VCM≦3.0V PSRR+ PSRR- Output Voltage Range VOUT Gain Bandwidth Slew Rate FT SR VDD = 3 to 10V, VSS = 0V, VOUT = 1.5V VSS=-3 to -10V, VDD= 0V, VOUT= -1.5V RL = ∞ VDD = 1.2V, RL = 47kΩ (to VDD/2) VDD = 3V, RL = 2kΩ(to VDD/2) VDD = 5V, RL = 2kΩ(to VDD/2) VDD = 10V, RL = 2kΩ(to VDD/2) VDD = 3V VDD = 3V dB dB VDD-0.05 V 1.10 V 2.90 V 4.90 V 9.80 V kHz V/μsec Test Conditions :Unless otherwise stated, VDD = 3.0V, VSS = 0V, VCM = VOUT = VDD / 2, RL = 1MΩ (to VSS), CL = 10pF (to VSS) XC221A1200 PARAMETER Supply Voltage IDD =100μA SYMBOL VDD Supply Current IDD Input Offset Voltage Input Offset Current Input Bias Current Input Resistance VOF IOF IB RIN AVD CONDITIONS VDD = 3V VDD = 1.2V Large Signal Voltage Gain Common Mode Rejection Ratio Power Supply Rejection Ratio CMRR 0≦VCM≦3.0V PSRR+ PSRR- Output Voltage Range VOUT Gain Bandwidth Slew Rate FT SR VDD=3 to 10V, VSS = 0V, VOUT = 1.5V VSS=-3 to -10V, VDD=0V, VOUT=-1.5V RL = ∞ VDD = 1.2V, RL = 47kΩ (to VDD/2) VDD = 3V, RL = 2kΩ(to VDD/2) VDD = 5V, RL = 2kΩ(to VDD/2) VDD = 10V, RL = 2kΩ(to VDD/2) VDD = 3V VDD = 3V MIN. 1.2 67 16.75 75 TYP. 100 50.00 1 1 1 110 MAX. 10.0 150 150.00 20.0 - 60 75 - 60 60 0.05 0.10 0.10 0.10 0.10 - 75 75 550 0.50 Ta = 25℃ UNITS V μA μA mV pA pA TΩ dB dB dB dB VDD-0.05 V 1.10 V 2.90 V 4.90 V 9.80 V kHz V/μsec Test Conditions :Unless otherwise stated, VDD = 3.0V, VSS = 0V, VCM = VOUT = VDD / 2, RL = 1MΩ (to VSS), CL = 10pF (to VSS) 3/9 XC221A Series ■TYPICAL PERFORMANCE CHARACTERISTICS ●XC221A1100 <15μA> Phase margin (゜) (1) Voltage Gain vs. Phase Margin (2) Sink Current vs. Output Voltage (4) Supply Current vs. Power Supply Voltage 4/9 (3) Source Current vs. Output Voltage (5) Supply Current vs. Ambient Temperature XC221A Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) ●XC221A1100 <15μA> (Continued) (6) Power Supply Rejection Ratio vs. Frequency (7) Large Signal Input / Output Response (8) Small Signal Input / Output Response 5/9 XC221A Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) ●XC221A1200 <100μA> (1) Voltage Gain vs. Phase Margin 6/9 (2) Sink Current vs. Output Voltage (3) Source Current vs. Output Voltage (4) Supply Current vs. Power Supply Voltage (5) Supply Current vs. Ambient Temperature XC221A Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) ●XC221A1200 <100μA> (Continued) (6) Power Supply Rejection Ratio vs. Frequency (7) Large Signal Input / Output Response (8) Small Signal Input / Output Response 7/9 XC221A Series ■PACKAGING INFORMATION ●SOT-25 ■MARKING RULE 5 ① 1 4 ② ③ ④ 2 ① represents product series and supply current MARK 1 2 PRODUCT SERIES XC221A11 XC221A12 3 SOT-25 (TOP VIEW) ② based on internal standards ③ represents load capacitance MARK LOAD CAPACITANCE 0 200pF ④ represents the production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excluded) 8/9 SUPPLY CURRENT 15μA 100μA XC221A Series 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD. 9/9