KVM CPU Switch Boxes Mulltii Port Features: • • • • • • • • • Supports both PS/2 and serial mouse Hot-key functions allow easy computer access Plug and play system configuration Cascade configuration expands system capability High VGA resolution 1,920 × 1,440 Auto-scan automatically selects computers sequentially Operating system independent, transparent to all applications Keyboard and mouse can be hot plugged at any time Keyboard states automatically saved and restored when switching computers One-Console KVM CPU Switches The KVM CPU Switch Boxes allows you to access multiple computers from one keyboard, mouse and monitor. There is no interface card or software to configure. Installation is as easy as connecting cables between the CPU Switch and your computers. Operation is as simple as pressing buttons or entering hot-key commands. The KVM CPU Switch is independent of computer operating systems, allowing the attached computers to run different applications Specification Table Number of Console Supported Number of PC Supported Part Number 1 4 KVM510 1 8 KNV108 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 23/06/12 V1.1