1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 Features 30.5 dBm P1dB Active Bias Circuit 11.5 dB Gain 5V Single Positive Supply RoHS Compliant SOIC-8 General Description The XP1066-SD is a high linearity power amplifier capable of 30.5 dBm of compressed 1-dB power and up to 46 dBm of OIP3. This device has an integrated active bias circuit and can be externally optimized to achieve 11.5 dB of gain. The XP1066-SD is housed in an RoHS compliant SOIC-8 power package and has low thermal resistance. All devices are 100% RF and DC tested. The XP1066-SD is specifically designed to be used as a driver amplifier for wireless infrastructure equipment. Absolute Maximum Ratings Typical Parameters Parameter Typ Typ Typ Units Frequency Range 1950 2140 2200 MHz Gain 11.5 11.5 11.5 dB Input Retrun Loss -7.0 -13.3 -15.0 dB Output Return Loss -10.5 -6.0 -5.0 dB Output IP3 42.0 42.0 42.0 dBm Output P1dB 30.7 30.1 29.5 dBm Output Power @ ACPR -45dBc, IS-95 22.5 23.5 23.0 dBm Output Power @ ACPR -45dBc, WCDMA 22.5 22.5 21.5 dBm Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature Current Power Dissipation (PDC) Thermal Resistance +6.0 V +20 dBm -55 ºC to +125 ºC 150 ºC -40 ºC to +85ºC 900 mA 5W 9 ºC/W Operation of this device above any of these parameters may cause damage. Typical performance in Mimix evaluation board Electrical Characteristics (T = 25ºC) Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture. Parameter Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Noise Figure Output P1dB Operating Current Range Supply Voltage Condition Externally Matched Externally Matched Externally Matched Units MHz dB dB dB dBm dB dBm mA V Min. 1800 10.0 29.0 Typ. 2140 11.5 -10 -8 +46 6 30.5 420 5.0 Max. 2200 500 Notes: 1. T = 25ºC, 50 Ohm system. 2. OIP3 is measured with two tones at output power of 15 dBm/tone separated by 1 MHz. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 Evaluation Board Schematic Evaluation Board Component Layout R2 C6 R4 C10 R1 C10 C11 C4 C3 C2 C5 R5 C1 C8 C7 C9 Component Values Value C1 3.9 pF 0402 3.9pF COG High Q Murata C2 10 pF 0402 10pF COG High Q Murata C3 100 pF 0402 100pF COG Murata C4, C5, C6 10 nF 0603 10nF X7R 50V Murata C7 100 uF 100 uF Tantalum Capacitor C9, C10 20 pF 0402 20 pF Hi Q capacitor Murata C8 1.6 pF 1.6 pF 0402 Hi Q capacitor Murata 1.8 pF 1.8 pF 0402 Hi Q capacitor C11 R1 R2, R2, R3, R4, R5 100 Ohm Description Manufactur er Ref Designator 0402 100 ohm resistor AVX Murata VENKEL Zero ohm link Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 Typical Performance Measured in Mimix evalutaion board XP1066-SD: Gain: 5V, 450mA XP1066-SD: Sparameters: 5V, 450mA 15 S11 10 S22 S21 Gain (dB) (dB) 5 0 -5 -10 -15 -20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 S21 1.8 1.85 1.9 1.95 Frequency (GHz) XP1066-SD: Return Loss: 5V, 450mA 2.1 2.15 2.2 -40 2.06 GHz 20 -45 15 S11 10 S22 ACP (dBc) Return Loss (dB) 2.05 XP1066-SD: ACPR: 5V, 450mA, IS-95 9CH FWD 25 5 0 -5 2.14 GHz 2.2 GHz -50 -55 -60 -10 -65 -15 -20 -70 1.8 1.85 1.9 1.95 2 2.05 2.1 2.15 2.2 10 11 12 13 14 15 Frequency (GHz) 16 17 18 19 20 21 22 23 22 23 Pout (dBm) XP1066-SD: ACPR: 5V, 450mA, 3GPP WCDMA XP1066-SD: Current: 5V, IS-95 9CH FWD -40 0.46 2.06 GHz -45 2.06 GHz 2.14 GHz 2.14 GHz 0.45 2.22 GHz -50 Current (A) ACP (dBc) 2 Frequency (GHz) -55 -60 2.22 GHz 0.44 0.43 -65 -70 0.42 10 11 12 13 14 15 16 17 Pout (dBm) 18 19 20 21 22 23 10 11 12 13 14 15 16 17 18 19 20 21 Pout (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 Functional Block Diagram Pin Out Detail Vref Vbias Pin Function Description 1 Vref Reference voltage N/C RFout 3 RFin RF Input RFin 6, 7 RFout RF output RFout 8 Vbias Bias circuit voltage N/C N/C 2,4,5 N/C Not connected Backside slug is collector GND Land Pattern It is recommended that all N/C pins be grounded and sufficient number of plated thru vias be added under the ground plane to insure RF stability and good thermal grounding. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 Physical Dimensions Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 MTTF These numbers were calculated based on accelerated life test information received from the fabrication foundry and measured thermal resistance. XP1066-SD Vcc=5.0 V, Icc=450 mA MTTF (hours) 1.0E+09 1.0E+08 1.0E+07 1.0E+06 60 70 80 90 100 110 Backplate Temperature (deg C) XP1066-SD Vcc=5.0 V, Icc=450 mA 140 120 Tch (deg C) 100 80 60 40 20 0 40 50 60 70 80 90 100 110 Backplate Temperature (deg C) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1800-2200 MHz 1W, High Linearity InGaP HBT Amplifier XP1066-SD August 2008 - Rev 15-Aug-08 Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information Part Number for Ordering Description XP1066-SD-0G00 XP1066-SD-0G0T Matte Tin plated RoHS compliant SOIC-8 surface mount package in bulk quantity Matte Tin plated RoHS compliant SOIC-8 surface mount package in tape and reel XP1066-SD-EV1 XP1066-SD Evaluation Board Caution: ESD Sensitive Appropriate precautions in handling, packaging and testing devices must be observed. Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 7 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.