DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Features Functional Block Diagram (SOT-89) 18 dBm Linear Power @ 2140 MHz 15.5 dB Gain @ 2140 MHz 12 dB Gain @ 2700 MHz 27 dBm P1dB @ 2140 MHz Low Performance Variation Over Temperature Low Cost: SOT-89 Package 100% DC On-Wafer Testing ESD Protection on All Die: >4000V HBM Low Thermal Resistance: <35ºC/Watt Low Volt Supply: 5V, Active Bias Ground 4 1 Input 2 3 Ground Output Bias Absolute Maximum Ratings Max Device Voltage Max Device Current Max Device Dissipated Power RF Input Power Storage Temperature Junction Temperature Operating Temperature Thermal Resistance ESD (HBM) ESD (MM) Moisture Sensitivity Level (MSL) Description The CGB8001-SC is a single stage, medium power, high dynamic range amplifier. Designed for applications operating within the DC to 2.8 GHz frequency range, Mimix’s medium power amplifier is an ideal solution for transmit, receive and IF applications. This MMIC amplifier is available in an industry standard, RoHS compliant, SOT-89 package. Mimix's InGaP HBT technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. The InGaP HBT die have extra pads to enable thorough DC testing. This unique test capability and the inclusion of ESD protection on all die, significantly enhances the quality, reliability and ruggedness of this product. This medium power amplifier offers significant ease of use in a broad range of applications with minimum external matching elements. The combination of high gain, P1dB and high linear power at low current makes the CGB8001-SC an ideal transmit solution as a driver or output stage when used in applications including 3G, fixed wireless broadband, WLAN and WiMAX. The CGB8001-SC has a an on-chip integrated active bias circuit providing stable current over temperature variations. The device is biased with a single +5V supply in a class AB mode making it efficient at back-off input power levels. +6.0 V 400 mA 1.2 W +17 dBm -55ºC to 150ºC 150ºC -40ºC to +85ºC 35º C/W 4000 V (Class 3B) Class C MSL1 Operation of this device above any of these parameters may cause permanent damage. Applications PA Driver Amp, IF Amp, LO Buffer Amp UMTS, 3G, WLAN, WiMAX Wireless Broadband, Fixed Wireless, SATCOM Transmit and Receive Functions CATV Typical Performance: (5V, 25ºC) Parameter Frequency Small Signal Gain Output Power at 1dB Compression Noise Figure Symbol F S21 P1dB NF Pout @ ACPR = -45dBc, IS-95, 9 Forward Channels Pout Unit GHz dB dBm dB dBm 900 20.5 27.6 3.6 21 1950 2140 2500 2700 16.2 1 5.5 1 3.5 12 27 27 26.5 25.2 3.7 3.9 4.3 5.5 21 18 16 16 *IS-95, 9 forward channels @ 900 & 1950 MHz, WCDMA, TM-1, 64 DPCH @ 2140, 2450 & 2750 MHz Electrical Characteristics: (5V, 25ºC) Parameter Frequency Test Frequency Quiesc ent Current Small Signal Gain Output Power at 1dB Compression Noise Figure Symbol F F Icq S21 P1dB NF Pout @ ACPR = -45dBc, IS-95, 9 Forward Channels Pout Unit GHz GHz mA dB dBm dB dBm Min DC 14.5 26.5 Typ 1.9 100 15 .7 27.3 3.7 21 Max 2.8 130 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Evaluation Board Layout Component Values Component 850-950 MHz 1800-2200 MHz Designator (A) (B) 2400-2800 MHz Vendor, Size (C) C1 short 2.2 pF* 27 pF C2 100 pF short short KOA 0603 NPO KOA 0603 NPO C3 100 pF 100 pF 100 pF KOA 0603 NPO C4 1000 pF 1000 pF 1000 pF KOA 0603 NPO C5 1 uF 1 uF 1 uF KOA 0805 X7R C6 3.9 pF 1 pF 1 pF KOA 0603 NPO C7 5.5 pF DNP DNP KOA 0603 NPO L2 39 nH 27 nH 22 nH Murata 0603 chip TL1 6 mm, 50 ohms N/A N/A N/A TL2 3 mm, 50 ohms 3 mm, 50 ohms 3 mm, 50 ohms N/A TL3 1.5 mm, 50 ohms 1.5 mm, 50 ohms 1.5 mm, 50 ohms N/A TL4 3.5 mm, 50 ohms 3.5 mm, 50 ohms 3.5 mm, 50 ohms N/A * 1800-2200 MHz linearity can be improved by movi ng C1 3 mm further away from the CGB8001-SC Vcc = 5 V Recommended Schematic C5 CGB8001-SC C2 C4 C1 C3 RFin TL1 C7 L2 TL2 TL3 RFout TL4 C6 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Typical S-Parameter and Noise Performance: 900 MHz 5V, 100mA, App CKT @ 900MHz 25 S11 20 900MHz -40 25 85 Unit Gain 20.3 20.5 20.1 dB P1dB 28.0 27.6 26.1 dBm NF 3.1 3.7 4.4 S21 S22 15 10 dB 5 0 -5 dB -10 -15 -20 -25 0 0.25 0.5 0.75 1 1.25 1.5 1.75 Frequency (GHz) 2 2.25 2.5 2.75 5V, 100mA, App CKT @ 900MHz 25 20 15 10 S11 S21 S22 dB 5 0 -5 -10 -15 -20 -25 0.7 0.75 0.8 0.85 0.9 0.95 Frequency (GHz) 1 1.05 1.1 ACPR Vd = 5V, Iq = 100mA, 900MHz Current Vs Ouput Power Vd = 5V, Iq = 100mA, 900MHz, Is-95A IS-95A Downlink, 9 Channels Forward 180 -35 160 150 140 25degC 130 -40degC 120 85degC ACPR (dBc) Current (mA) 170 -40 -45 25degC -50 -40degC 85degC -55 110 100 -60 90 -65 80 10 10 12 14 16 18 Ouput Power (dBm) 20 12 14 16 18 20 22 22 Ouput Power (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 3 DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Typical S-Parameter and Noise Performance: 1.96 GHz 5V, 100mA, App CKT @ 1900MHz 25 S11 S21 S22 20 1.96GHz -40 25 85 Unit Gain 16.4 16.2 15.9 dB P1dB 27.8 27.2 26.8 dBm NF 3.1 3.7 4.3 dB 15 10 dB 5 0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 5V, 100mA, App CKT @ 1900MHz 25 20 15 10 S11 S21 S22 dB 5 0 -5 -10 -15 -20 -25 1.7 1.75 1.8 1.85 1.9 1.95 2 2.05 Frequency (GHz) 2.1 2.15 2.2 Current Vs Output Power Vd = 5V, Iq = 100mA, 1960MHz IS-95A Downlink, 9 Channels Forward ACPR Vd = 5V, Iq = 100mA, 1960MHz IS-95A Downlink, 9 Channels Forward -30 180 170 150 140 25degC 130 -40degC 120 85degC 110 ACPR (dBc) Current (mA) -35 160 -40 25degC -45 -40degC -50 85degC -55 100 -60 90 80 -65 10 11 12 13 14 15 16 17 18 19 Output Power (dBm) 20 21 22 23 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Output Power (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Typical S-Parameter and Noise Performance: 2.14 GHz 5V, 100mA, App CKT @ 1900MHz 25 S11 S21 S22 20 2.14GHz -40 25 85 Unit Gain 15.8 15.5 14.9 dB P1dB 28.2 27.0 26.7 dBm NF 3.3 3.9 4.7 dB 15 10 dB 5 0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 5V, 100mA, App CKT @ 1900MHz 25 20 15 10 S11 S21 S22 dB 5 0 -5 -10 -15 -20 -25 1.7 1.75 1.8 1.85 1.9 1.95 2 2.05 Frequency (GHz) 2.1 2.15 2.2 Current Vd = 5V, Iq = 100mA, 2140 MHz WCDMA TM-1 64 DPCH ACPR Vd = 5V, Iq = 100mA, 2140MHz WCDMA TM-1 64 DPCH -30 180 170 150 140 25degC 130 -40degC 85degC 120 110 ACPR (dBc) Current (mA) -35 160 -40 25degC -45 -40degC -50 85degC -55 100 -60 90 80 -65 10 11 12 13 14 15 16 17 18 19 Output Power (dBm) 20 21 22 23 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Output Power (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Typical S-Parameter and Noise Performance: 2.45 GHz 5V, 100mA, App CKT @ 2500MHz 25 20 2.45GHz -40 25 85 Unit Gain 14.0 13.7 12.8 dB P1dB 26.8 26.6 26.2 dBm NF 3.8 4.1 4.9 dB 15 S11 S21 S22 10 dB 5 0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 5V, 100mA, App CKT @ 2500MHz 25 20 15 S11 S21 S22 10 dB 5 0 -5 -10 -15 -20 -25 2.4 2.45 2.5 2.55 2.6 2.65 Frequency (GHz) 2.7 2.75 2.8 ACPR Vd = 5V, Iq = 100mA, 2450MHz WCDMA TM-1, 64 DPCH Current Vs Output Power Vd = 5V, Iq = 100mA, 2450MHz WCDMA TM-1, 64 DPCH -20 180 -25 150 140 25degC 130 -40degC 120 85degC ACPR (dBc) Current (mA) 170 160 -30 -35 25degC -40 -40degC -45 85degC -50 110 -55 100 -60 90 -65 80 10 10 11 12 13 14 15 16 17 18 19 20 21 22 11 12 13 14 15 16 17 18 19 20 21 22 23 23 Output Power (dBm) Output Power (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Typical S-Parameter and Noise Performance: 2.75 GHz 5V, 100mA, App CKT @ 2500MHz 25 20 2.75GHz -40 25 85 Unit Gain 12.3 11.9 11.0 dB P1dB 25.4 25.2 24.8 dBm NF 4.7 5.5 7.5 dB 15 S11 S21 S22 10 dB 5 0 -5 -10 -15 -20 -25 0 0.5 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 5V, 100mA, App CKT @ 2500MHz 25 20 15 S11 S21 S22 10 dB 5 0 -5 -10 -15 -20 -25 2.4 2.45 2.5 2.55 2.6 2.65 Frequency (GHz) 2.7 2.75 2.8 Current Vs Output Power Vd = 5V, Iq = 100mA, 2750MHz WCDMA TM-1, 64 DPCH ACPR Vd = 5V, Iq = 100mA, 2750MHz WCDMA TM-1, 64 DPCH 180 -20 170 150 140 25degC 130 -40degC 120 85degC 110 ACPR (dBc) Current (mA) -25 160 -30 -35 25degC -40 -40degC -45 85degC -50 100 -55 90 -60 80 -65 10 11 12 13 14 15 16 17 18 19 20 21 22 23 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Output Power (dBm) Output Power (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC MTTF These numbers were calculated based on accelerated life test information received from the fabrication foundry and measured thermal resistance. CGB8001-SC Vcc=5.0 V, Icq =130 mA MTTF (hours) 1.0E+09 1.0E+08 1.0E+07 1.0E+06 60 70 80 90 100 110 Backplate Temperature (deg C) CGB8001-SC Vcc=5.0 V, Icq = 130 mA 140 120 Tch (deg C) 100 80 60 40 20 0 40 50 60 70 80 90 100 110 Backplate Temperature (deg C) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 8 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-2.8 GHz InGaP HBT 0.5W Medium Power Amplifier October 2008 - Rev 06-Oct-08 CGB8001-SC Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information Part Number for Ordering CGB8001-SC-0G00 CGB8001-SC-0G0T PB-CGB8001-SC-00A0 PB-CGB8001-SC-00B0 PB-CGB8001-SC-00C0 Description Matte Tin plated RoHS compliant SOT-89 surface mount package in bulk quantity Matte Tin plated RoHS compliant SOT-89 surface mount package in tape and reel Evaluation Board for 850-950 MHz Evaluation Board for 1800-2200 MHz Evaluation Board for 2400-2800 MHz We also offer the plastic packages with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types Caution: ESD Sensitive Appropriate precautions in handling, packaging and testing devices must be observed. Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 9 of 9 Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.