MASWML0028 SP6T Reflective Switch with TTL Compatible Driver, 0.85 to 18.0 GHz V 1.00 Features n n n n n Broad Band Frequency SMA Connectors Hermetically Sealed Housing High Isolation TTL Compatible Other Mechanical SMA Female connectors for RF ports and Solder pins for TTL & DC connections. This device is painted with black epoxy finish. Description This SP6T reflective switch offers high Isolation & Low Insertion. The switch has an integral TTL compatible driver. It also consists of 3 Bits parallel TTL controls (3 control pins). This switch is supplied with SMA connectors. It is a proven design for ESM application. It is also suitable for Airborne, Naval & Ground base applications. Electrical Performance (Applies over the frequency range @ +25 °C, output load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.) Type SP6T Frequency (GHz) 0.85 - 18.0 I/Loss max (dB) 4.0 Isolation min (dB) 55 R/Loss min (dB) 9.5 S. Speed max (ns) I/P Power max (mw) 900 100 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. Logic Power Supply Dimensions (Ex-Con) mm V & mA 3 Bits parallel TTL +5 190 n n n -5.2 38.1x38.1x19.1 50 Operating Temp °C Storage Temp 0 to +100 -40 to +100 °C North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300