MASWML0017 SPDT Reflective Switch 10.5 to 13.5 GHz Features n n n n n n V 1.00 Description This SPDT reflective switch offers a 3 W cw RF input power handling capability. It has two independent DC bias control to drive both channels. The switch provide fast switching and high Isolation. It is a proven design for harsh environments and is suitable for Airborne, Naval & Ground base applications. SMA Connectors High Input RF Power Internal DC Bias Circuitry Hermetically Sealed Housing High Isolation Fast Switching Other Mechanical SMA Female connectors for RF ports and Solder pins for bias & DC connections. This device is painted with black epoxy finish. Electrical Performance (Applies over the frequency range @ +25 °C, output load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.) Type SPDT Frequency (GHz) 10.5 - 13.5 I/Loss max (dB) 1.7 Isolation min (dB) 65 R/Loss min (dB) 11.7 S. Speed max (ns) I/P Power max (mw) 30 3W (CW) Logic Visit www.macom.com for additional data sheets and product information. Dimensions (Ex-Con) mm V & mA -5 to -15V for -5 L .Loss & R. Loss to 15 +1V (50mA max) for Isolation (DC Bias only) M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Power Supply n n n 0.5 1 50x20x9.8 Operating Temp °C Storage Temp -55 to +110 -55 to +125 °C 50 North America: Tel. (800) 366-2266 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300