Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) TCE series Type: TCE0806G TCE0806S TCE1210G TCE1608G [0302 inch]* [0302 inch] [0504 inch] [0603 inch] * Dimensions Code [EIA] Issue date: April 2012 • All specifications are subject to change without notice. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. (1/8) Common Mode Filters For Ultra High-speed Differential Signal Line (HDMI, DVI, DisplayPort, USB3.0, etc.) Conformity to RoHS Directive TCE Series TCE0806G FEATURES • Common mode filter for improving EMC with an ESD protection element (ESD suppressor) using thin-film processing and materials technology acquired from HDD head manufacturing. • One component can be used for suppressing common mode noise and ESD. • Greatly reduces the number of components and installation area. • By providing wide bandwidth (cutoff frequency: 3GHz min.) for differential mode, this product has almost no effect for highspeed differential signals and can suppress the radiated emission. • This product contains no lead and supports lead-free soldering. APPLICATIONS Suppressing noise and ESD for high-speed differential signal interfaces such as USB 2.0 and HDMI for mobile devices such as mobile phones, smartphones, digital cameras, and portable music players, and general consumer products. PRODUCT IDENTIFICATION TCE (1) 0806 G - 900 - 2P - T (2) (3) (4) (5) (6) (1) Series name (2) Dimensions LW (3) Product identification number (4) Impedance[at 100MHz] 900: 90 (5) Number of line 2P: 2-line (6) Packaging style T: ø180mm reel taping TEMPERATURE RANGES Operating Storage(After mount) –25 to +85°C –25 to +85°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 10,000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAMS/RECOMMENDED PC BOARD PATTERNS 4 0.30 0.20 6 GND 1 2 0.90 0.15 0.10typ. 5 GND 5 6 0.61 1.10 0.15±0.05 1 Dimensions in mm 2 • No polarity 0.12 +0.08 –0.04 3 0.1 4 0.39 0. 0.40±0.05 0.65±0.05 0.20±0.05 0.50±0.05 5ty p. 3 15 0.85±0.05 0.12 +0.08 –0.04 Weight: 1mg Dimensions in mm • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (2/8) ELECTRICAL CHARACTERISTICS Common mode impedance ( ) [100MHz] 90±30 Part No. TCE0806G-900-2P DC resistance ( )max. [1 line] 3.5 Cutoff frequency (GHz)typ. 5.0 Clamp voltage (V)max. 100 Rated current Idc (A)max. 0.10 Rated voltage Edc (V)max. 10 Insulation resistance (M )min. 1 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 Impedance(Ω) 1000 Common mode 100 Differential mode 10 1 1 10 100 Frequency (MHz) 1000 10000 • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (3/8) Common Mode Filters For Ultra High-speed Differential Signal Line (HDMI, DVI, DisplayPort, USB3.0, etc.) Conformity to RoHS Directive TCE Series TCE0806S FEATURES • Common mode filter for improving EMC with an ESD protection element (ESD suppressor) using thin-film processing and materials technology acquired from HDD head manufacturing. • One component can be used for suppressing common mode noise and ESD. • Greatly reduces the number of components and installation area. • By providing wide bandwidth (cutoff frequency: 3GHz min.) for differential mode, this product has almost no effect for highspeed differential signals and can suppress the radiated emission. • This product contains no lead and supports lead-free soldering. APPLICATIONS Suppressing noise and ESD for high-speed differential signal interfaces such as USB3.0, HDMI and Serial ATA for mobile devices such as mobile phones, smartphones, digital cameras, and portable music players, and general consumer products. PRODUCT IDENTIFICATION TCE (1) 0806 S - 120 - 2P - T (2) (3) (4) (5) (6) (1) Series name (2) Dimensions LW (3) Product identification number (4) Impedance[at 100MHz] 120: 12 (5) Number of line 2P: 2-line (6) Packaging style T: ø180mm reel taping TEMPERATURE RANGES Operating Storage(After mount) –25 to +85°C –25 to +85°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 10,000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAMS/RECOMMENDED PC BOARD PATTERNS 4 0.30 0.20 6 GND 1 2 0.90 0.15 0.10typ. 5 GND 5 6 0.61 1.10 0.15±0.05 1 Dimensions in mm 2 • No polarity 0.12 +0.08 –0.04 3 0.1 4 0.39 0. 0.40±0.05 0.65±0.05 0.20±0.05 0.50±0.05 5ty p. 3 15 0.85±0.05 0.12 +0.08 –0.04 Weight: 1mg Dimensions in mm • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (4/8) ELECTRICAL CHARACTERISTICS Common mode impedance ( ) [100MHz] 35±12 12±7 Part No. TCE0806S-350-2P TCE0806S-120-2P DC resistance ( )max. [1 line] 1.5 1.0 Cutoff frequency (GHz)typ. 7.0 8.0 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS TCE0806S-350-2P-T200 Clamp voltage (V)max. 100 100 1000 Impedance(Ω) 1000 Impedance(Ω) 10000 Common mode Differential mode 10 Rated voltage Edc (V)max. 10 10 Insulation resistance (M )min. 1 1 TCE0806S-120-2P-T201 10000 100 Rated current Idc (A)max. 0.10 0.10 100 Common mode 10 Differential mode 1 1 10 100 Frequency (MHz) 1000 10000 1 1 10 100 Frequency (MHz) 1000 10000 • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (5/8) Common Mode Filters For Ultra High-speed Differential Signal Line (HDMI, DVI, DisplayPort, USB3.0, etc.) Conformity to RoHS Directive TCE Series TCE1210G FEATURES • Common mode filter for improving EMC with an ESD protection element (ESD suppressor) using thin-film processing and materials technology acquired from HDD head manufacturing. • One component can be used for suppressing common mode noise and ESD. • Greatly reduces the number of components and installation area. • By providing wide bandwidth (cutoff frequency: 3GHz min.) for differential mode, this product has almost no effect for highspeed differential signals and can suppress the radiated emission. • This product contains no lead and supports lead-free soldering. APPLICATIONS Suppressing noise and ESD for high-speed differential signal interfaces such as USB 2.0 and HDMI for mobile devices such as mobile phones, smartphones, digital cameras, and portable music players, and general consumer products. PRODUCT IDENTIFICATION TCE (1) 1210 G - 900 - 2P - T (2) (3) (4) (5) (6) (1) Series name (2) Dimensions LW (3) Product identification number (4) Impedance[at 100MHz] 900: 90 (5) Number of line 2P: 2-line (6) Packaging style T: ø180mm reel taping TEMPERATURE RANGES Operating Storage(After mount) –25 to +85°C –25 to +85°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAMS/RECOMMENDED PC BOARD PATTERNS 0.15typ. 0.57±0.03 0.25 +0.10 –0.05 3 5 1 6 2 • No polarity 0.75 0.30 0.60 1.40 Dimensions in mm 0.20±0.10 0.20±0.10 4 6 1 0.30±0.10 0.25 1.75 1.25±0.07 5 0.55±0.10 GND 3 0.20 4 1.00±0.07 GND 2 0.20±0.10 Weight: 3mg Dimensions in mm • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (6/8) ELECTRICAL CHARACTERISTICS Common mode impedance ( ) [100MHz] min. typ. 60 90 Part No. TCE1210G-900-2P DC resistance ( )max. [1 line] Cutoff frequency (GHz)typ. Clamp voltage (V)max. Rated current Idc (A)max. Rated voltage Edc (V)max. Insulation resistance (M )min. 1.75 5.0 100 0.10 10 1 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 Impedance(Ω) 1000 Common mode 100 Differential mode 10 1 1 10 100 Frequency (MHz) 1000 10000 • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (7/8) Common Mode Filters For Ultra High-speed Differential Signal Line (HDMI, DVI, DisplayPort, USB3.0, etc.) Conformity to RoHS Directive TCE Series TCE1608G PRODUCT IDENTIFICATION FEATURES • Common mode filter for improving EMC with an ESD protection element (ESD suppressor) using thin-film processing and materials technology acquired from HDD head manufacturing. • One component can be used for suppressing common mode noise and ESD. • Greatly reduces the number of components and installation area. • By providing wide bandwidth (cutoff frequency: 3GHz min.) for differential mode, this product has almost no effect for highspeed differential signals and can suppress the radiated emission. • This product contains no lead and supports lead-free soldering. TCE (1) 1608 G - 900 - 4P - T (2) (3) (4) (5) (6) (1) Series name (2) Dimensions LW (3) Product identification number (4) Impedance[at 100MHz] 900: 90 (5) Number of line 4P: 4-line (6) Packaging style T: ø180mm reel taping APPLICATIONS Suppressing noise and ESD for high-speed differential signal interfaces such as USB 2.0 and HDMI for mobile devices such as mobile phones, smartphones, digital cameras, and portable music players, and general consumer products. TEMPERATURE RANGES Operating Storage(After mount) –25 to +85°C –25 to +85°C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces/reel SHAPES AND DIMENSIONS/CIRCUIT DIAGRAMS/RECOMMENDED PC BOARD PATTERNS 8 7 6 GND 9 1 5 10 GND 2 3 4 0.20 0.48 10 0.20 1.42 0.35 5 1.30 0.20±0.10 0.20±0.10 0.40±0.10 6 9 0.10min. 0.20±0.10 7 0.15 8 0.15typ. 0.40±0.10 0.80±0.10 1.60±0.10 0.10min. 1 2 • No polarity 3 4 2.00 Dimensions in mm Weight: 3mg Dimensions in mm • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce (8/8) ELECTRICAL CHARACTERISTICS Common mode impedance ( ) [100MHz] min. typ. 60 90 Part No. TCE1608G-900-4P DC resistance ( )max. [1 line] Cutoff frequency (GHz)typ. Clamp voltage (V)max. Rated current Idc (A)max. Rated voltage Edc (V)max. Insulation resistance (M )min. 1.95 5.0 100 0.10 10 1 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 10000 Impedance(Ω) 1000 Common mode 100 Differential mode 10 1 1 10 100 Frequency (MHz) 1000 10000 • All specifications are subject to change without notice. 002-01 / 20120424 / e9712_tce