DIODES 74LVC126A

74LVC126A
QUADRUPLE 3-STATE BUFFERS
Description
Pin Assignments
The 74LVC126A provides four independent buffers with three state
outputs. Each output is independently controlled by an associated
output enable pin (OE) which places the device in the high
impedance state when driven low. The device is designed for
operation with a power supply range of 1.65V to 5.5V. The inputs are
tolerant to 5.5V allowing this device to be used in a mixed voltage
environment.
The device is fully specified for partial power down
applications using IOFF.
The IOFF circuitry disables the output
preventing damaging current backflow when the device is powered
down.
Features
•
Supply Voltage Range from 1.65V to 5.5V
•
Sinks 24mA at VCC = 3.3V
•
CMOS low power consumption
•
IOFF Supports Partial-Power-Down Mode Operation
Applications
•
Inputs or outputs accept up to 5.5V
•
Voltage Level Shifting
•
Inputs can be driven by 3.3V or 5.5V allowing for voltage
•
General Purpose Logic
translation applications.
•
Power Down Signal Isolation
ESD Protection Exceeds JESD 22
•
Wide array of products such as:
•
ƒ
200-V Machine Model (A115-A)
ƒ
PCs, networking, notebooks, ultrabooks, netbooks
ƒ
2000-V Human Body Model (A114-A)
ƒ
Computer peripherals, hard drives, CD/DVD ROM
ƒ
Exceeds 1000-V Charged Device Model (C101C)
ƒ
TV, DVD, DVR, set top box
•
Latch-Up Exceeds 250mA per JESD 78, Class II
•
Range of Package Options SO-14 and TSSOP-14
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3) Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC126A
Document number: DS35266 Rev. 3 - 2
1 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Pin Descriptions
Pin Number
Pin Name
Description
1
1OE
2
1A
Data Input
3
1Y
Data Output
4
2OE
5
2A
Data Input
6
2Y
Data Output
7
GND
8
3Y
Data Output
Data Input
Data Enable Input (active high)
Data Enable Input (active high)
Ground
9
3A
10
3OE
11
4Y
Data Output
12
4A
Data Input
13
4OE
Data Enable Input (active high)
14
VCC
Supply Voltage
Data Enable Input (active high)
Logic Diagram
Function Table
Inputs
Output
OE
A
Y
H
H
H
H
L
L
L
X
Z
74LVC126A
Document number: DS35266 Rev. 3 - 2
2 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
VCC
Description
Rating
Unit
Human Body Model ESD Protection
2
KV
Charged Device Model ESD Protection
1
KV
200
V
Machine Model ESD Protection
Supply Voltage Range
-0.5 to +6.5
V
VI
Input Voltage Range
-0.5 to +6.5
V
VO
Voltage applied to output in high impedance or IOFF state
-0.5 to +6.5
V
VO
Voltage applied to output in high or low state
-0.3 to VCC +0.5
V
IIK
Input Clamp Current
VI <0
-50
mA
VO <0
-50
mA
IOK
Output Clamp Current
IO
Continuous output current
±50
mA
Continuous current through VCC or GND
±100
mA
ICC,, IGND
TJ
Operating Junction Temperature
-40 to +150
°C
TSTG
Storage Temperature
-65 to +150
°C
PTOT
Total Power Dissipation
500
mW
Note:
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Parameter
Min
Max
Unit
1.65
5.50
V
0
5.5
V
Active Mode
0
VCC
V
VCC = 0V; Power Down Mode
0
5.5
V
Supply Voltage
VI
Input Voltage
VO
Output Voltage
Δt/ΔV
Input transition rise or fall rate
TA
Operating free-air temperature
Note:
Conditions
VCC = 1.65V to 2.7V
20
VCC = 2.7V to 3.6V
10
-40
+125
ns/V
ºC
5. Unused inputs should be held at VCC or Ground.
74LVC126A
Document number: DS35266 Rev. 3 - 2
3 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VIH
VIL
Parameter
Test Conditions
High-level Input
Voltage
Low-level input
voltage
IOH = -100μA
VOH
High Level
Output Voltage
TA = -40°C to +85°C
Min
Max
TA = -40°C to +125°C
Min
Max
1.65V to 1.95V
0.65 X VCC
0.65 X VCC
2.3V to 2.7V
1.7
1.6
2.7V to 3.6V
2.0
2.0
Unit
V
1.65V to 1.95V
0.35 X VCC
0.35 X VCC
2.3V to 2.7V
0.7
0.7
2.7V to 3.6V
0.8
0.8
1.65V to 3.6V
VCC – 0.2
IOH = -4mA
1.65V
1.2
IOH = -8mA
2.3V
1.9
2.7V
2.2
2.05
3.0V
2.3
2.1
IOH = -24mA
3.0V
2.2
2.0
IOH = 100μA
1.65V to 3.6V
0.2
0.3
1.65V
0.45
0.6
2.3V
0.70
0.85
2.7V
0.40
0.6
3.0V
0.55
0.6
V
VCC – 0.3
V
IOH = -12mA
IOH = 4mA
VOL
VCC
High-level Output IOH = 8mA
Voltage
IOH = 12mA
V
IOH =-24mA
3.0V
0.55
0.6
Input Current
VI =GND to 5.5V
3.6V
±5
± 20
μA
IOZ
Z State Leakage
Current
VO = GND or 5.5V
3.6V
± 10
± 20
μA
IOFF
Power Down
Leakage Current
VI or VO = 0V to 3.6V
0
10
20
μA
ICC
Supply Current
VI = GND or VCC
IO=0
3.6V
10
40
μA
2.7V to 3.6V
500
5000
μA
II
ΔICC
Additional Supply One input at
Current
VCC –0.6V Other
74LVC126A
Document number: DS35266 Rev. 3 - 2
4 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Switching Characteristics
From
To
Parameter
(Input) (Output)
A
tpd
Y
OE
ten
Y
OE
tdis
Y
tSK(0)
Test
Conditions
See
Figure 1
-40°C to +85°C
TA = +25°C
-40°C to +125°C
Unit
Min
Typ
Max
Min
Max
Min
Max
1.0
4.2
9.3
1.0
9.8
1.0
11.3
1.0
2.7
6.7
1.0
7.2
1.0
9.3
1.0
2.9
5.0
1.0
5.2
1.0
6.5
1.0
2.5
4.5
1.0
4.7
1.0
6.0
1.0
4.8
9.5
1.0
10
1.0
11.5
1.0
2.1
7.8
1.0
8.3
1.0
10.4
1.0
2.3
6.1
1.0
6.3
1.0
8.0
1.0
2.5
5.5
1.0
5.7
1.0
7.5
1.0
4.4
12.1
1.0
12.5
1.0
14.1
1.0
2.7
8.2
1.0
8.7
1.0
10.8
1.0
2.7
6.5
1.0
6.7
1.0
8.5
1.0
2.3
5.8
1.0
6.0
1.0
7.5
Vcc = 1.8V
± 0.15V
Vcc = 2.5V
± 0.2V
Vcc = 2.7V
Vcc = 3.3V
± 0.3V
Vcc = 1.8V
± 0.15V
Vcc = 2.5V
± 0.2V
Vcc = 2.7V
Vcc = 3.3V
± 0.3V
Vcc = 1.8 V
± 0.15V
Vcc = 2.5V
± 0.2V
Vcc = 2.7V
Vcc = 3.3V
± 0.3V
Vcc = 3.3V
± 0.3V
1.0
1.0
ns
ns
ns
1.5
ns
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Cpd
Power dissipation
capacitance per gate
CI
Input Capacitance
Test
Conditions
VCC = 1.8V
Typ
VCC = 2.5V
Typ
VCC = 3.3V
Typ
Unit
f = 10 MHz
7.3
11.2
14.9
pF
4
4
4
pF
Vi = VCC – or
GND
Package Characteristics
Symbol
Note:
Parameter
Test Conditions
SO-14
θJA
Thermal Resistance
Junction-to-Ambient
TSSOP-14
θJC
Thermal Resistance
Junction-to-Case
TSSOP-14
SO-14
VCC
(Note 6)
(Note 6)
Min
Typ
TBD
159
TBD
25
Max
Unit
o
C/W
o
C/W
6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC126A
Document number: DS35266 Rev. 3 - 2
5 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Parameter Measuement Information
Inputs
VCC
TEST
S1
tPLH/tPHL
Open
tPLZ/tPZL
VLOAD
tPHZ/tPZH
GND
VM
VLOAD
CL
RL
V∆
≤2ns
VCC/2
2 x VCC
30pF
1KΩ
0.15V
≤2ns
VCC/2
2 x VCC
30pF
500Ω
0.15V
≤2.5ns
1.5V
6V
50pF
500Ω
0.3V
≤2.5ns
1.5V
6V
50pF
500Ω
0.3V
VI
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
2.7V
2.7V
3.3V±0.3V
2.7V
Voltage Waveform Pulse Duration
Voltage Waveform Enable and Disable Times
Low and High Level Enabling
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLZ and tPHZ are the same as tdis.
E. tPZL and tPZH are the same as tEN0
F. tPLH and tPHL are the same as tPD.
Figure 1. Load Circuit and Voltage Waveforms
74LVC126A
Document number: DS35266 Rev. 3 - 2
6 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Ordering Information
Quantity
Part Number Suffix
S14
SO-14
2500/Tape & Reel
-13
T14
TSSOP-14
2500/Tape & Reel
-13
Package
Code
74LVC126AS14-13
74LVC126AT14-13
Notes:
13” Tape and Reel
Packaging
(Note 5)
Device
7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO-14, TSSOP-14
Part Number
74LVC126A
Document number: DS35266 Rev. 3 - 2
Package
74LVC126AS14
SO-14
74LVC126AT14
TSSOP-14
7 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Package Outline Dimensions (All dimensions in mm.)
Package Type: SO-14
E
H
Gauge Plane
L
θ
Detail “A”
D
7°
(4
x)
A2
A
e
B
A1
Detail “A”
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27
0°
8°
θ
All Dimensions in mm
0.25
Package Type: TSSOP-14
B
Gauge Plane
Seating Plane
L
F1
a2
Pin# 1 Indent
F
Detail ‘A’
G
K
A
a1
D
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
8°
0°
A
4.9
5.10
B
4.30
4.50
C
1.2
⎯
D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
C
Detail ‘A’
74LVC126A
Document number: DS35266 Rev. 3 - 2
8 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
Suggested Pad Layout
Package Type: SO-14
X
C1
C2
Dimensions Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
Y
Package Type: TSSOP-14
X
C1
C2
Dimensions Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
Y
74LVC126A
Document number: DS35266 Rev. 3 - 2
9 of 10
www.diodes.com
June 2012
© Diodes Incorporated
74LVC126A
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
74LVC126A
Document number: DS35266 Rev. 3 - 2
10 of 10
www.diodes.com
June 2012
© Diodes Incorporated