74LV00A QUADRUPLE 2-INPUT NAND GATES Description Pin Assignments The 74LV00A provides provides four independent 2-input NAND gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a NEW PRODUCT mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The gates perform the Boolean function: Y A B or Y AB Features Wide Supply Voltage Range from 2.0V to 5.5V Sinks or sources 12mA at VCC = 4.5V CMOS low power consumption IOFF Supports Partial -Power Down Operation Inputs or Outputs accept up to 5.5V Inputs can be driven by 3.3V or 5V allowing for voltage Applications Schmitt Trigger Action at All Inputs ESD Protection Tested per JESD 22 Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: General Purpose Logic Power Down Signal Isolation translation applications. Wide array of products such as: PCs, networking, notebooks, ultrabooks, netbooks Computer peripherals, hard drives, CD/DVD ROM TV, DVD, DVR, set top box 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Click for Ordering Information 74LV00A Document number: DS35657 Rev. 1 - 2 1 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A Pin Descriptions Logic Diagram Pin Name 1 1A Data Input 2 1B Data Input 3 1Y Data Output 4 2A Data Input 5 2B Data Input 6 2Y Data Output 7 GND 8 3Y NEW PRODUCT Pin Number Description Ground Data Output 9 3A Data Input 10 3B Data Input 11 4Y Data Output 12 4A Data Input 13 4B Data Input 14 VCC Supply Voltage Function Table Inputs A H L X B H X L Output Y L H H Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.) Symbol Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV 200 V ESD MM Machine Model ESD Protection Supply Voltage Range -0.5 to +7.0 V VI Input Voltage Range note 4 -0.5 to +7.0 V IIK Input Clamp Current VI < 0V -20 mA IOK Output Clamp Current VO < -0V -50 mA IO Continuous Output Current - 0.5V < VO VCC +0.5V ±25 mA ICC Continuous Current Through VCC 50 mA IGND Continuous Current Through GND -50 mA Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C PTOT Total Power Dissipation 500 mW VCC TJ Note: Parameter 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74LV00A Document number: DS35657 Rev. 1 - 2 2 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol Conditions Min Max Supply Voltage — 2.0 5.5 V VI Input Voltage — 0 5.5 V VO Output Voltage NEW PRODUCT VCC Parameter IOH High-Level Output Current IOL Low-Level Output Current Input Transition Rise or Fall Rate Δt/ΔV Note: — 0 2.0V 2.3V to 2.7V 3.0V to 3.6V 4.5V to 5.5V 2.0V 2.3V to 2.7V 3.0V to 3.6V 4.5V to 5.5V 2.3V to 2.7V 3.0V to 3.6V 4.5V to 5.5V — — — — — — — — — — — VCC -50 -2 -6 -12 50 2 6 12 200 100 20 — -40 +125 Operating Free-Air Temperature TA Unit V mA μA mA mA μA mA mA mA ns/V °C 5. Unused inputs should be held at VCC or Ground. Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Symbol VIH VIL VOH Parameter Test Conditions Max TA = -40°C to +125°C Min Max 2.0V 1.5 — 1.5 — 2.3V to 2.7V VCC X 0.7 — VCC X 0.7 — — 3.0V to 3.6V VCC X 0.7 — VCC X 0.7 — — 4.5V to 5.5V VCC X 0.7 — VCC X 0.7 — — 2.0V — 0.5 — 0.5 — 2.3V to 2.7V — VCC X 0.3 — VCC X 0.3 — 3.0V to 3.6V — VCC X 0.3 — VCC X 0.3 — 4.5V to 5.5V — VCC X 0.3 — VCC X 0.3 IOH = -50μA 2.0V to 5.5V VCC-0.1 — VCC-0.1 — IOH = -2mA 2.3V 2.0 — 2.0 — IOH = -6mA 3.0V 2.48 — 2.48 — Low-Level Input Voltage Unit V — V — V 4.5V 3.8 — 3.8 — IOL = 50μA 2.0V to 5.5V — 0.1 — 0.1 IOL = 2mA 2.3V — 0.4 — 0.4 IOL = 6mA 3.0V — 0.44 — 0.44 IOL = 12mA 4.5V — 0.55 — 0.55 0V — 5 — 5 μA VOL Low-Level Output Voltage IOFF Power Down VI or VO = 0 to 5.5V Leakage Current ICC Min — IOH = -12mA II TA = -40°C to +85°C — High-Level Input Voltage High-Level Output Voltage VCC V Input Current VI = GND or 5.5V 0 to 5.5V — ±1 — ±1 μA Supply Current VI = GND or VCC IO = 0 5.5V — 20 — 20 μA 74LV00A Document number: DS35657 Rev. 1 - 2 3 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A Switching Characteristics Symbol NEW PRODUCT tPD Parameter Propagation Delay AN to YN Test Conditions Figure 1 CL = 15pF Figure 1 CL = 50pF VCC Min — — — — — — 2.5V ± 0.2V 3.3V ± 0.3V 5.0V ± 0.5V 2.5V ± 0.2V 3.3V ± 0.3V 5.0V ± 0.5V TA = +25°C Typ 7.1 5 3.6 9.6 6.9 4.9 -40°C to +85°C Max 12.9 7.9 5.5 16.6 11.4 7.5 Min 1 1 1 1 1 1 Max 15 9.5 6.5 20 13 8.5 -40°C to +125°C Min 1 1 1 1 1 1 Max 16 10.5 7.5 21 14 9.5 Unit ns ns Operating Characteristics TA = +25°C Cpd Parameter Test Conditions VCC Typ Unit Power Dissipation Capacitance per Gate F = 10 MHz CL = 50pF 3.3V 5.0V 9.5 11 pF Noise Characteristics VCC = 3V, CL = 50pF, TA = +25°C Symbol Min Typ Max VOL(p) Quiet output, maximum dynamic VOL Parameter — 0.2 0.8 Unit V VOL(V) Quiet output, minimum dynamic VOL — -0.1 -0.8 V VOH(V) Quiet output, minimum dynamic VOH — 3.1 — V VIH(D) High Level dynamic input voltage 2.31 — — V VIL(D) Low Level dynamic input voltage — — 0.99 V Package Characteristics Symbol Parameter Test Conditions VCC Min Typ Max Unit Ci Input Capacitance Vi = VCC – or GND 2.0 to 5.5V — 3.3 10 pF 74LV00A Document number: DS35657 Rev. 1 - 2 4 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A NEW PRODUCT Parameter Measurement Information VCC 2.0V to 5.5V Inputs VI VCC tr/tf <3ns VM CL VCC/2 15pF or 50pF Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10MHz C. Inputs are measured separately one transition per measurement D. tPLH and tPHL are the same as tPD Figure 1 Load Circuit and Voltage Waveforms 74LV00A Document number: DS35657 Rev. 1 - 2 5 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A NEW PRODUCT Ordering Information 13” Tape and Reel Package Code Packaging (Note 6) Quantity Part Number Suffix 74LV00AS14-13 S14 SO-14 2500/Tape & Reel -13 74LV00AT14-13 T14 TSSOP-14 2500/Tape & Reel -13 Device Note: 6. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf Marking Information (1) SO14, TSSOP14 Part Number 74LV00AS14 74LV00AT14 74LV00A Document number: DS35657 Rev. 1 - 2 6 of 9 www.diodes.com Package SO-14 TSSOP-14 October 2013 © Diodes Incorporated 74LV00A Package Outline Dimensions (All Dimensions in mm) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. NEW PRODUCT Package Type: SO-14 E H Gauge Plane L Detail “A” D 7° (4 x) A2 A e B SO-14 Dim Min Max A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 e 1.27 Typ H 5.80 6.20 L 0.38 1.27 0 8 All Dimensions in mm Detail “A” A1 0.25 Package Type: TSSOP-14 B L F1 Gauge Plane Seating Plane a2 Pin# 1 Indent F Detail ‘A’ G K A a1 D C TSSOP-14 Dim Min Max a1 7° (4X) a2 8° 0 A 4.9 5.10 B 4.30 4.50 C 1.2 D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm Detail ‘A’ 74LV00A Document number: DS35657 Rev. 1 - 2 7 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Package Type: SO-14 NEW PRODUCT X Dimensions Value (in mm) X 0.60 Y 1.50 C1 5.4 C2 1.27 C1 C2 Y Package Type: TSSOP-14 X C1 C2 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 Y 74LV00A Document number: DS35657 Rev. 1 - 2 8 of 9 www.diodes.com October 2013 © Diodes Incorporated 74LV00A IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com 74LV00A Document number: DS35657 Rev. 1 - 2 9 of 9 www.diodes.com October 2013 © Diodes Incorporated