Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH4D18-1R0 1.0uH @ 100kHz N 0.045 1.72 CDRH4D18-2R2 2.2uH @ 100kHz N 0.075 1.32 CDRH4D18-2R7 2.7uH @ 100kHz N 0.105 1.28 CDRH4D18-3R3 3.3uH @ 100kHz N 0.11 1.04 CDRH4D18-3R9 3.9uH @ 100kHz N 0.155 0.88 CDRH4D18-4R7 4.7uH @ 100kHz N 0.162 0.84 CDRH4D18-5R6 5.6uH @ 100kHz N 0.17 0.8 CDRH4D18-6R8 6.8uH @ 100kHz N 0.2 0.76 CDRH4D18-8R2 8.2uH @ 100kHz N 0.245 0.68 CDRH4D18-100 10uH @ 100kHz N 0.2 0.61 CDRH4D18-120 12uH @ 100kHz N 0.21 0.56 CDRH4D18-150 15uH @ 100kHz N 0.24 0.5 CDRH4D18-180 18uH @ 100kHz N 0.338 0.48 CDRH4D18-220 22uH @ 100kHz N 0.397 0.41 CDRH4D18-270 27uH @ 100kHz N 0.441 0.35 CDRH4D18-330 33uH @ 100kHz N 0.694 0.32 CDRH4D18-390 39uH @ 100kHz N 0.709 0.3 SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH4D18 SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 2000PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 4.70 4.70 1.9 1.5 1.9 5.3 L 2.0 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH4D18 SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH4D18 SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00