Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH5D18-4R1 4.1 @ 10kHz N 0.057 1.95 CDRH5D18-5R4 5.4 @ 10kHz N 0.076 1.6 CDRH5D18-6R2 6.2 @ 10kHz N 0.096 1.4 CDRH5D18-8R9 8.9 @ 10kHz N 0.116 1.25 CDRH5D18-100 10 @ 10kHz N 0.124 1.2 CDRH5D18-120 12 @ 10kHz N 0.153 1.1 CDRH5D18-150 15 @ 10kHz N 0.196 0.97 CDRH5D18-180 18 @ 10kHz N 0.21 0.85 CDRH5D18-220 22 @ 10kHz N 0.29 0.8 CDRH5D18-270 27 @ 10kHz N 0.33 0.75 CDRH5D18-330 33 @ 10kHz N 0.386 0.65 CDRH5D18-390 39 @ 10kHz N 0.52 0.57 CDRH5D18-470 47 @ 10kHz N 0.595 0.54 CDRH5D18-560 56 @ 10kHz N 0.665 0.5 CDRH5D18-680 68 @ 10kHz N 0.84 0.43 CDRH5D18-820 82 @ 10kHz N 0.978 0.41 CDRH5D18-101 100 @ 10kHz N 1.2 0.36 SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH5D18 SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 2000PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 5.70 5.70 2.15 2 2.15 6.3 L 2.0 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH5D18 SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH5D18 SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00