Major League Electronics .039 cl Terminal Strip Headers - Surface Mount - Vertical Ordering Information TSHSM-7 XX XX D XX V XXX XX X XX LF Pins Per Row Lead Free 01 - 40 Alignment Pin Row Specification Leave blank if not needed AP = With D = Dual Row Packing Information TR-P = Tape and Reel with Plastic Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-0 = Tube without Pick and Place Pad If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic Pin Options Post Height 1.65mm .065 1.91mm .075 04 06 Plating Options Gold Flash Over Entire Pin 200µ Matte Tin All Over F T Polarized Position Leave blank if not needed If required, specify empty pin position, e.g. 012 for Pin 12 Vertical Specifications Current Rating: 1.0 Ampere Insulation Resistance: 500MΩ Min. Dielectric Withstanding: 200V AC Contact Resistance: 20 mΩ Max. Operating Temperature: -40°C to +105°C Max. Process Temperature: Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. Materials Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Products cut to specific sizes are uncancellable/nonreturnable TSHSM-7-DV SERIES .039 cl Dual Row - Surface Mount Terminal Strip Headers - Vertical Parts are subject to change without notice 06 MAR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com Revisions Revision E - (16th Dec 2011) Alignment Pin option added. Revision D - (8th Dec 2012) Plating options amended. Removed: H: 30µ Gold on Contact Area / Matte Tin on Tail G: 10µ Gold on Contact Area / Flash on Tail Added: F: Gold Flash Over Entire Pin Revision C - (19th Apr 2010) Change to Specification; From 0.5 Ampere to 1.0 Ampere. Revision B - (20th Mar 2008) Amendment to packing options in ordering grid. Revision A TR-P = Tape and Reel with Plastic Pick and Place pad TR-M = Tape and Reel with Metal Pick and Place pad TR-K = Tape and Reel with Kapton Tape Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-M = Tube with Metal Pick and Place pad TB-K = Tube with Kapton Tape Pick and Place pad TB-0 = Tube without Pick and Place Pad BK-0 = Bulk without Pick and Place Pad Revision B TR-P = Tape and Reel with Plastic Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-0 = Tube without Pick and Place Pad If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic TSHSM-7-DV SERIES .039 cl Dual Row - Surface Mount Terminal Strip Headers - Vertical 06 MAR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com