Major League Electronics .0315 cl Socket Strip - Surface Mount - Vertical Ordering Information SMSS-8 XX D 06 XX Pins Per Row XXX XX X LF Lead Free 01 - 40 Row Specification D = Dual Row Surface Mount Plating Options - 10µ Gold on Contact area/Flash on Tails - Gold Flash Over Entire Pin - Matte Tin all Over G F T Specifications Current Rating: 1.0 Ampere Insulation Resistance: 1000MΩ Min. Dielectric Withstanding: 500V AC Contact Resistance: 30 mΩ Max. Operating Temperature: -40°C to + 105°C Max. Process Temperature: Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. Materials Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Packing Information TR-P = Tape and Reel with Plastic Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-0 = Tube without Pick and Place Pad If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic Polarized Position Leave blank if not needed If required, specify empty pin position, e.g. 012 for Pin 12 Products cut to specific sizes are uncancellable/nonreturnable SMSS-8-D-06 SERIES Socket Strip - Vertical - Dual Entry Parts are subject to change without notice 12 FEB 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com Revisions Revision B - (20th Mar 2008) Amendment to packing options in ordering grid: Revision A TR-P = Tape and Reel with Plastic Pick and Place pad TR-M = Tape and Reel with Metal Pick and Place pad TR-K = Tape and Reel with Kapton Tape Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-M = Tube with Metal Pick and Place pad TB-K = Tube with Kapton Tape Pick and Place pad TB-0 = Tube without Pick and Place Pad BK-0 = Bulk without Pick and Place Pad Revision B TR-P = Tape and Reel with Plastic Pick and Place pad TB-P = Tube with Plastic Pick and Place pad TB-0 = Tube without Pick and Place Pad If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic Revision C - (17th Mar 2011) Amendment to plating options: Revision B GT = 10µ Gold on Contact Area / Matte Tin on Tail Revision C G - 10µ Gold on Contact area/Flash on Tails F - Gold Flash Over Entire Pin T - Matte Tin all Over SMSS-8-D-06 SERIES Socket Strip - Vertical - Dual Entry 12 FEB 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com