DS54-0006 Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Features • • • • • • • Low Cost Small Size and Low Profile Excellent Repeatability (Lot-to-Lot Variation) Typical Isolation: 23 dB Typical Amplitude Balance: 0.8 dB Typical Insertion Loss: 1.4 dB SOIC-16 Package Rev. V4 Functional Block Diagram1 Description M/A-COM’s DS54-0006 is an IC-based monolithic power splitter/combiner in a low cost SOIC-16 plastic package. This device is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables, and peripheral devices (PCMCIA cards) for wireless standards such as PCS, PCN, DECT, PHS, and DCS-1800. Available in Tape and Reel. The DS54-0006 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Ordering Information Part Number Package DS54-0006 Bulk Packaging DS54-0006-TR 1000 piece reel DS54-0006-TB Sample Test Board 1. All unused pins must be RF and DC grounded. Pin Configuration Pin No. Function Pin No. Function 1 GND 9 GND 2 GND 10 GND 3 GND 11 RF 4 OUT 4 RF 2 OUT 12 GND 5 GND 13 RF 3 OUT 6 RF 1 OUT 14 GND 7 GND 15 GND 8 RF IN 16 GND Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS54-0006 Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Rev. V4 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Units Min Typ Max Insertion Loss above 6.0 dB dB — 1.4 1.7 Isolation 1700 - 2000 dB 18 23 — 1700 – 1880 1880 – 2000 — — — — — — 1.2:1 1.6:1 1.4:1 1.7:1 2.0:1 1.7:1 dB — 0.8 1.3 Deg — 5 10 VSWR Output Input Input Amplitude Balance Phase Balance Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power 4 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Typical Performance Curves @25ºC Insertion Loss vs. Frequency Amplitude Balance vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS54-0006 Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Rev. V4 Typical Performance Curves @25ºC Isolation vs. Frequency I/P VSWR vs. Frequency Phase Balance vs. Frequency O/P VSWR vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS54-0006 Four Way SMT Power Splitter/Combiner 1700 – 2000 MHz Rev. V4 SOIC-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.