MAPDCC0007 Low Cost Four-way SMT Power Splitter/Combiner, 824 - 960 MHz Functional Diagram Features • • • • • • • • • • • • Rev. V2 Low Cost Small Size and Low Profile Industry Standard SOW-16 SMT Plastic Package Excellent Repeatability (Lot-to-Lot Variation) Typical Isolation: 23 dB Typical Amplitude Balance: 0.3 dB Typical Insertion Loss: 1.0 dB Lead-Free SOW-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of DS54-0001 Pin 1 Pin 16 Description M/A-COM’s MAPDCC0007 is an IC-based monolithic power splitter/combiner in a low cost SOW-16 plastic package. This device is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables and peripheral devices (PCMCIA cards) for wireless standards such as GSM, AMPS, CDPD, RAM and ARDIS. Available in tape and reel. Pin Configuration1 The MAPDCC0007 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Pin No. Function Pin No. Function 1 GND 9 GND 2 GND 10 GND 3 RF2 (Out) 11 GND 4 GND 12 RF4 (Out) 5 RF1 (Out) 13 GND 6 GND 14 RF3 (Out) 7 RFIN 15 GND 8 GND 16 GND Ordering Information Part Number Package MAPDCC0007 Bulk Packaging MAPDCC0007-TR 1000 piece reel MAPDCC0007-TB Sample Test Board 1. Pins 1,2,4,6,8,9,10,11,13,15 and 16 must be RF and DC grounded. Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0007 Low Cost Four-way SMT Power Splitter/Combiner, 824 - 960 MHz Rev. V2 Electrical Specifications: TA = 25°C2 Parameter Frequency Units Min Typ Max Insertion Loss “above 6.0 dB theoretical loss” 824 - 960 MHz dB — 1.0 1.2 Isolation 824 - 960 MHz dB 18 23 — 2. Input VSWR 824 - 960 MHz Ratio — 1.2:1 1.4:1 Output VSWR 824 - 960 MHz Ratio — 1.4:1 1.75:1 Amplitude Balance 824 - 960 MHz dB — 0.3 0.7 Phase Balance 824 - 960 MHz Deg — 2 4 All specifications apply with a 50-ohm source and load impedance. Absolute Maximum Ratings 3,4 Parameter Input Power 3. 4. 5. 5 Absolute Maximum 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Recommended PCB Configuration Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125W maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCC0007 Low Cost Four-way SMT Power Splitter/Combiner, 824 - 960 MHz Rev. V2 Typical Performance Curves Insertion Loss vs. Frequency (above theoretical split loss) VSWR vs. Frequency Input 1.50 1.75 1.00 0.50 0.00 824 Out put 2.00 VSWR Insertio n Lo ss (dB) 2.00 1.50 1.25 858 892 926 1.00 824 960 Frequency (MHz) 858 892 926 960 Fre que ncy (MHz ) Isolation vs. Frequency Lead-Free, SOW-16† 35 Isolation (dB) 30 25 20 15 10 5 0 824 858 892 926 960 Fre que ncy (MHz ) † Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.