Bulletin PD-20563 rev. B 06/06 15TQ060 15TQ060S 15 Amp SCHOTTKY RECTIFIER IF(AV) = 15 Amp VR = 60V Major Ratings and Characteristics Description/Features Characteristics Values Units IF(AV) Rectangular waveform 15 A VRRM 60 V IFSM @ tp = 5 μs sine 1000 A VF @ 15 Apk, TJ = 125°C 0.56 V TJ range - 55 to 150 °C The 15TQ060 Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles 15TQ060 15TQ060S Base Cathode Base Cathode 2 1 Cathode 3 Anode TO-220AC www.irf.com 1 3 Anode N/C D2PAK 1 15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 Voltage Ratings Part number VR 15TQ060 Max. DC Reverse Voltage (V) 60 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 15TQ Units 15 A Max. Peak One Cycle Non-Repetitive 1000 Surge Current * See Fig. 7 260 EAS Non-Repetitive Avalanche Energy IAR Repetitive Avalanche Current A Conditions 50% duty cycle @ TC = 104° C, rectangular wave form 5μs Sine or 3μs Rect. pulse 10ms Sine or 6ms Rect. pulse 6 mJ 1.50 A 15TQ Units 0.62 V @ 15A 0.82 V @ 30A 0.56 V @ 15A 0.71 V @ 30A Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1.50 Amps, L = 11.5 mH Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) * See Fig. 1 IRM Max. Reverse Leakage Current (1) Conditions TJ = 25 °C TJ = 125 °C 0.80 mA TJ = 25 °C * See Fig. 2 45 mA TJ = 125 °C CT Max. Junction Capacitance 720 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body 10000 V/ μs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300μs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters VR = rated VR 15TQ Units °C Conditions TJ Max. Junction Temperature Range -55 to 150 Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction to Case 3.25 °C/W DC operation RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface , smooth and greased * See Fig. 4 Heatsink wt Approximate Weight T Mounting Torque Marking Device 2 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) 15TQ060 Case Style TO-220 15TQ060S Case Style D2Pak www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 1000 1000 TJ = 150°C Reverse Current - IR (mA) 100 TJ= 150°C TJ= 25°C 100 100°C 1 75°C 50°C 0.1 25°C 0.01 0.001 0 10 20 30 40 50 60 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) TJ= 125°C 125°C 10 10 1 0 0.4 0.8 1.2 1.6 TJ = 25°C 100 2 0 Forward Voltage Drop - VFM (V) 10 20 30 40 50 60 Reverse Voltage - VR (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance - Z thJC (°C/W) 10 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 0.01 0.001 0.00001 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.0001 0.001 0.01 0.1 1 t 1, Rectangular Pulse Duration (Seconds) 10 100 Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 15TQ060, 15TQ060S 150 14 140 12 Average Power Loss - (Watts) Allowable Case Temperature - (°C) Bulletin PD-20563 rev. B 06/06 130 DC 120 110 100 Square wave (D = 0.50) 80% Rated VR applied 90 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 10 8 RMS Limit DC 6 4 2 see note (2) 80 0 5 10 15 20 0 25 0 2 Average Forward Current - I F(AV) (A) 4 6 8 10 12 14 16 18 20 22 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Non-Repetitive Surge Current - I FSM (A) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L HIGH-SPEED SWITCH IRFP460 DUT Rg = 25 ohm CURRENT MONITOR FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 Outline Table Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 Part Marking Information TO-220AC PART NUMBER EXAMPLE: THIS IS A 15TQ060 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO DATE CODE YEAR 1 = 2001 WEEK 19 LINE C ASSEMBLY LOT CODE D2Pak THIS IS A 15TQ060S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 INTERNATIONAL RECTIFIER LOGO PART NUMBER 15TQ060S DATE CODE ASSEMBLY LOT CODE YEAR 0 = 2000 WEEK 02 LINE C Tape & Reel Information Dimensions in millimeters and (inches) 6 www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 Ordering Information Table Device Code 15 T Q 060 1 2 3 4 S - 5 6 1 - Current Rating (15 = 15A) 2 - Package T = TO-220 3 - Schottky "Q" Series 4 - Voltage Rating (060 = 60V) 5 - y none = TO-220 yS 6 - = D2Pak y none = Standard Production y PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/06 www.irf.com 7