DC/DC Converters Features • • • • • • Dual Output SIP or DIP Package Industry Standard Pinout 1000 VDC Isolation -40°C to +85°C Operation MTBF >1.1 MHrs Specification Input Input Voltage Range : Nominal ± 10% Input Reflected Ripple Current : 20mA pk-pk (through 12µH inductor 5Hz to 20MHz) Input ReverseVoltage Protection : None Output Output Voltage : See table Minimum Load : None(2) Line Regulation : 1.2% / 1% Δ Vin Load Regulation : 10% 20-100% load change Setpoint Accuracy : ±3% Ripple & Noise : 75mV pk-pk max, 20MHz bandwidth Temperature Coefficient : 0.02% / °C Maximum Capacitive Load : ±100μF General Efficiency : See table Isolation Voltage : 1000V DC min Isolation Resistance : 109Ω Isolation Capacitance : 60pF typical Switching Frequency : Variable, 80KHz typical MTBF : >1.12MHrs to MIL-HDBK-217F at 25°C, GB Environmental Operating Temperature : -40°C to +85°C Storage Temperature : -40°C to +125°C Case Temperature : 100°C max Cooling : Convection-cooled www.element14.com www.farnell.com www.newark.com Page <1> 08/02/12 V1.0 DC/DC Converters Input Voltage 5V DC 12V DC 24V DC Output Voltage Output Current Efficiency Model Number ±5.0V ±100mA 74% MCA05D05D ±5.0V ±100mA 74% MCA05D05S ±12.0V ±42mA 78% MCA05D12D ±12.0V ±42mA 78% MCA05D12S ±15.0V ±33mA 80% MCA05D15D ±15.0V ±33mA 80% MCA05D15S ±5.0V ±100mA 75% MCA12D05D ±5.0V ±100mA 75% MCA12D05S ±12.0V ±42mA 78% MCA12D12D ±12.0V ±42mA 78% MCA12D12S ±15.0V ±33mA 80% MCA12D15D ±15.0V ±33mA 80% MCA12D15S ±5.0V ±100mA 74% MCA24D05D ±5.0V ±100mA 74% MCA24D05S ±12.0V ±42mA 78% MCA24D12D ±12.0V ±42mA 78% MCA24D12S ±15.0V ±33mA 78% MCA24D15D ±15.0V ±33mA 78% MCA24D15S Description DC/DC Converter, 1W, Dual O/P Mechanical Details Notes 1. Operation at no load will not damage unit but it may not meet all specifications 2. All dimensions in inches (mm) 3. Pin pitch tolerance: ±0.014 (±0.35) 4. Case tolerance ±0.02 (±0.5) 5. Weight: SIP 0.006 lbs (2.6 g), DIP 0.005 lbs (2.3 g) Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 08/02/12 V1.0