VISHAY VS-30BQ060PBF

VS-30BQ060PbF
Vishay High Power Products
Schottky Rectifier, 3.0 A
FEATURES
• Small foot print, surface mountable
• Very low forward voltage drop
• High frequency operation
Cathode
• Guard ring for enhanced ruggedness and long term
reliability
Anode
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
SMC
• Compliant to RoHS directive 2002/95/EC
• Designed and qualified for industrial level
DESCRIPTION
PRODUCT SUMMARY
IF(AV)
3.0 A
VR
60 V
The VS-30BQ060PbF surface mount Schottky rectifier has
been designed for applications requiring low forward drop
and small foot prints on PC boards. Typical applications are
in disk drives, switching power supplies, converters,
freewheeling diodes, battery charging, and reverse battery
protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
IF(AV)
CHARACTERISTICS
VALUES
UNITS
3.0
A
60
V
1200
A
Rectangular waveform
VRRM
IFSM
tp = 5 μs sine
VF
3.0 Apk, TJ = 125 °C
TJ
Range
0.52
V
- 55 to 150
°C
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VS-30BQ060PbF
UNITS
60
V
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average forward current
SYMBOL
IF(AV)
TEST CONDITIONS
VALUES
50 % duty cycle at TL = 123 °C, rectangular waveform
3.0
50 % duty cycle at TL = 113 °C, rectangular waveform
4.0
UNITS
A
Maximum peak one cycle
non-repetitive surge current
at TC = 25 °C
IFSM
Non-repetitive avalanche energy
EAS
TJ = 25 °C, IAS = 1.0 A, L = 10 mH
5.0
mJ
Repetitive avalanche current
IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical
1.0
A
Document Number: 94180
Revision: 04-Mar-10
5 μs sine or 3 μs rect. pulse
10 ms sine or 6 ms rect. pulse
Following any rated
load condition and with
rated VRRM applied
For technical questions, contact: [email protected]
1200
130
www.vishay.com
1
VS-30BQ060PbF
Vishay High Power Products Schottky Rectifier, 3.0 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
3A
VFM (1)
Maximum forward voltage drop
TJ = 25 °C
6A
3A
TJ = 125 °C
6A
IRM (1)
Maximum reverse leakage current
TJ = 25 °C
VR = Rated VR
TJ = 125 °C
VALUES
UNITS
0.58
0.76
V
0.52
0.66
0.5
mA
20
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to1 MHz), 25 °C
180
pF
Typical series inductance
LS
Measured lead to lead 5 mm from package body
3.0
nH
10 000
V/μs
VALUES
UNITS
- 55 to 150
°C
Maximum voltage rate of change
dV/dt
Rated VR
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
(1)
Maximum junction temperature range
TJ
Maximum storage temperature range
TStg
Maximum thermal resistance,
junction to lead
RthJL (2)
Maximum thermal resistance,
junction to ambient
RthJA
12
DC operation
Approximate weight
Marking device
°C/W
46
Case style SMC (similar to DO-214AB)
0.24
g
0.008
oz.
V3H
Notes
(1)
(2)
dP tot
1
------------- < -------------- thermal runaway condition for a diode on its own heatsink
dT J R thJA
Mounted 1" square PCB
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 94180
Revision: 04-Mar-10
VS-30BQ060PbF
100
10
1
0.1
0.1
IR - Reverse Current (mA)
IF - Instantaneous Forward Current (A)
Schottky Rectifier, 3.0 A Vishay High Power Products
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
TJ = 150 °C
10
TJ = 125 °C
1
TJ = 100 °C
TJ = 75 °C
0.1
TJ = 50 °C
TJ = 25 °C
0.01
0.001
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0
0.9
10
20
30
50
40
60
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
10
0
10
20
30
50
40
60
70
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
100
10
PDM
1
t1
0.1
0.01
0.00001
Single pulse
thermal resistance)
0.0001
0.001
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.01
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94180
Revision: 04-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
3
VS-30BQ060PbF
2.5
160
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
150
140
Average Power Loss (W)
Allowable Lead Temperature (°C)
Vishay High Power Products Schottky Rectifier, 3.0 A
DC
130
120
80 % Square wave
(D = 0.50)
110
100
90
80
2.0
1.5
RMS limit
1.0
DC
0.5
See note (1)
0
70
0
1
2
3
4
0
5
Fig. 5 - Maximum Average Forward Current vs.
Allowable Lead Temperature
IFSM - Non-Repetitive Surge Current (A)
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
IF(AV) - Average Power Current (A)
IF(AV) - Average Forward Current (A)
Fig. 6 - Maximum Average Forward Dissipation vs.
Average Forward Current
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
Tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration
Note
Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
(1)
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94180
Revision: 04-Mar-10
VS-30BQ060PbF
Schottky Rectifier, 3.0 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
VS-
30
B
Q
060
TR
PbF
1
2
3
4
5
6
7
1
-
HPP product suffix
2
-
Current rating
3
-
B = Single lead diode
4
-
Q = Schottky “Q” series
5
-
Voltage rating (060 = 60 V)
6
-
None = Box (1000 pieces)
TR = Tape and reel (3000 pieces)
7
-
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95023
Part marking information
www.vishay.com/doc?95029
Packaging information
Document Number: 94180
Revision: 04-Mar-10
Tape and reel
www.vishay.com/doc?95034
Bulk
www.vishay.com/doc?95397
For technical questions, contact: [email protected]
www.vishay.com
5
Outline Dimensions
Vishay High Power Products
SMC
DIMENSIONS in millimeters (inches)
2.75 (0.108)
3.15 (0.124)
1
5.59 (0.220)
6.22 (0.245)
1
2
2
Polarity
Part number
6.60 (0.260)
7.11 (0.280)
4.69 MAX.
(0.185 MAX.)
0.152 (0.006)
0.305 (0.012)
3.20 MIN.
(0.126 MIN.)
2.00 (0.079)
2.62 (0.103)
0.76 (0.030)
1.52 (0.060)
Document Number: 95023
Revision: 05-Nov-08
0.102 (0.004)
0.203 (0.008)
7.75 (0.305)
8.13 (0.320)
1.52 MIN.
(0.060 MIN.)
0.320 REF.
Soldering pad
For technical questions concerning discrete products, contact: [email protected]
For technical questions concerning module products, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000