DATA SHEET LOW OHMIC CHIP RESISTORS RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512 Product specification – Apr 26, 2012 V.6 RoHS compliant & Halogen Free Product specification Chip Resistor Surface Mount RL SERIES 2 2 0402 to 2512 SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC This specification describes RL0402 to RL2512 low ohmic chip resistors with lead-free terminations made by thick film process. Both part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED) APPLICATIONS Converters RL XXXX X X X XX XXXX L Printer (1) SIZE Server equipment board Telecom Consumer FEATURES Halogen Free Epoxy RoHS - - compliant (1) (2) (3) (4) (5) (6) (7) 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE F = ±1% G = ±2% J = ±5% (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel Products with lead free terminations meet RoHS requirements (4) TEMPERATURE COEFFICIENT OF RESISTANCE Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS (5) TAPING REEL Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production Low resistances applied to current sensing – = Based on spec 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel (6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is system default code for order only (Note) Letter H is Halogen / Lead free (special code on request) Resistance rule of global part number Resistance code rule 0RXXX (1 to 976 mΩ) Example 0R1 = 0.1 Ω 0R12 = 0.12 Ω 0R105 = 0.105 Ω ORDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 X with ±1% tolerance, supplied in 7-inch tape reel is: RL0603FR-070R56L. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL SERIES 3 3 0402 to 2512 PHYCOMP BRAND ordering codes Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2. 12NC CODE 2350 / 2390 / 2322 (1) SIZE TYPE Last digit of 12NC XXX XXXXX L (2) (3) Resistance decade (3) (4) START TOL. RESISTANCE IN (1) (%) RANGE EMBOSSED (2) PAPER/PE (2) TAPE ON REEL TAPE ON REEL (units) 4,000 5,000 10,000 Last digit 0.01 to 0.0976 X 0 0.1 to 0.976 X 7 0402 LRC31 ±5% 0.05 to 1 Ω 1 to 9.76 X 2350 - - 513 20xxx 8 LRC32 ±1% 0.05 to 1 Ω 10 to 97.6 X 2350 - - 513 22xxx 9 0603 LRC21 2350 ±5% 0.01 to 1 Ω 100 to 976 X - 512 10xxx - 1 LRC22 2350 ±1% 0.01 to 1 Ω 1 to 9.76 kX - 512 12xxx - 2 0805 LRC11 ±5% 0.01 to 1 Ω 10 to 97.6 kX 2350 - 511 10xxx - 3 LRC12 ±1% 0.01 to 1 Ω 100 to 976 kX 2350 - 511 12xxx - 4 1206 LRC01 2350 ±5% 0.01 to 1 Ω 1 to 9.76 MX - 510 10xxx - 5 LRC02 2350 ±1% 0.01 to 1 Ω 10 to 97.6 MX - 510 12xxx - 6 ±5% 0.01 to 0.0976 Ω - 735 90xxx - LPRC101 2390 ±5% 0.1 to 1 Ω - 735 60xxx - LPRC102 2390 ±1% 0.01 to 1 Ω - 735 3xxxx - 1218 LPRC201 2322 ±5% 0.01 to 1 Ω 735 64xxx - - 1210 LPRC101 2390 LPRC201 2322 ±1% 0.01 to 1 Ω 735 7xxxx - - ±5% 0.01 to 0.0976 Ω 760 90xxx - - LPRC111 2322 ±5% 0.1 to 1 Ω 760 60xxx - - LPRC111 2322 ±1% 0.01 to 0.0976 Ω 761 90xxx - - LPRC111 2322 ±1% 0.1 to 1 Ω 2010 LPRC111 2322 761 6xxxx - - ±5% 0.01 to 0.0976 Ω 762 90xxx - - LPRC221 2322 ±5% 0.1 to 1 Ω 762 60xxx - - LPRC221 2322 ±1% 0.01 to 0.0976 Ω 763 90xxx - - LPRC221 2322 ±1% 0.1 to 1 Ω - - 2512 LPRC221 2322 763 6xxxx (1) The resistors have a 12-digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) Example: 0.02 X = 0200 or 200 0.3 X = 3007 or 307 1X = 1008 or 108 33 kX = 3303 or 333 10 MX = 1006 or 106 ORDERING EXAMPLE The ordering code of a RL0603 chip resistor, value 0.56 X with ±1% tolerance, supplied in tape of 5,000 units per reel is: 235051212567L or RL0603FR-070R56L. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only (Note) . Letter H is Halogen / Lead free (special code on request). www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL 4 4 0402 to 2512 SERIES MARKING RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512 E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ): 4 digits 020 YNSC005 Fig. 1 Value = 20 mΩ The “R” is used as a decimal point; the other 3 digits are significant. RL0603: R≥100 mX, R = 10/20/30/40/50/60 mΩ E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ):3 digits YNSC006 Fig. 2 Value = 22 mΩ The “R” is used as a decimal point; the other 2 digits are significant. RL0402 / RL0603: R<100 mΩ EXCEPT 10/20/30/40/50/60 mΩ ynsc007 No marking Fig. 3 For further marking information, please see special data sheet “Chip resistors marking”. CONSTRUCTION The resistors are constructed out of a high-grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4. OUTLINES For dimension see Table 1 marking layer protective coat resistive layer inner electrode H termination (Ni / matte tin) ceramic substrate I2 DIMENSIONS I1 Table 1 For outlines see fig. 4 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RL0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10 W RL0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RL0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 YNSC064 L RL1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 RL1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20 Fig. 4 Chip resistor outlines RL1218 3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25 RL2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 RL2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL 5 5 0402 to 2512 SERIES ELECTRICAL CHARACTERISTICS Table 2 TYPE / RESISTANCE RANGE TEMPERATURE COEFFICIENT OF RESISTANCE RL0402 50mΩ≤R<1Ω RL0603 10mΩ≤R<1Ω 50mX≤R<100mX 100mX≤R<500mX 500mX≤R<1X ±1000 ppm/°C ±800 ppm/°C ±300 ppm/°C 10mX≤R≤36mX 36mX<R≤91mX 91mX<R≤500mX 500mX<R<1X ±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C ±300 ppm/°C 10mX≤R≤18mX 18mX<R≤47mX 47mX<R≤91mX 91mX<R≤360mX 360mX<R≤500mX 500mX<R<1X RL0805 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C ±1,500 ppm/°C ±1,000 ppm/°C ±800 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL2010 ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL2512 ±1,500 ppm/°C ±1,200 ppm/°C ±800 ppm/°C ±600 ppm/°C ±300 ppm/°C ±200 ppm/°C RL1206 RL1210 10mΩ≤R<1Ω RL1218 10mΩ≤R<1Ω 10mX≤R≤30mX 30mX<R≤56mX 56mX<R≤180mX 180mX<R<1X ±2,000 ppm/°C ±1,000 ppm/°C ±700 ppm/°C ±250 ppm/°C FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE Paper taping reel (R) Embossed taping reel (K) REEL DIMENSION RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512 7" (178 mm) 10,000 5,000 5,000 5,000 5,000 --- --- --- 10" (254 mm) 20,000 10,000 10,000 10,000 10,000 --- --- --- 13" (330 mm) 50,000 20,000 20,000 20,000 20,000 --- --- --- 7" (178 mm) --- --- --- --- --- 4,000 4,000 4,000 NOTE 1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”. www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL SERIES 6 6 0402 to 2512 FUNCTIONAL DESCRIPTION OPERATINGTEMPERATURE RANGE handbook, halfpage Range: –55 °C to +125 °C MLB206_1 P POWER RATING (%Prated ) 100 Each type rated power at 70 °C: RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W; RL1206=1/4 W; RL1210=1/2 W; RL1218=1 W; RL2010=3/4 W; RL2512=1 W. 50 RATED VOLTAGE The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: 0 55 0 50 70 100 125 o Tamb ( C) Fig. 5 Maximum dissipation (Pmax) in percentage of rated power as a function of the operating ambient temperature (Tamb ) V = √(P X R) Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (X) www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL SERIES 7 7 0402 to 2512 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Life/ Endurance IEC 60115-1 4.25.1 1,000 hours at 70±2°C applied RCWV 1.5 hours on, 0.5 hour off, still air required ±2% High Temperature Exposure/ Endurance at upper category temperature IEC 60068-2-2 1,000 hours at maximum operating temperature depending on specification, unpowered ±1% No direct impingement of forced air to the parts Tolerances: 125±5 °C Moisture Resistance MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours, 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered ±2% Parts mounted on test-boards, without condensation on parts Thermal Shock MIL-STD-202 Method 107 -55/+125 °C ±1% Number of cycles required is 300. Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Short time overload IEC60115-1 4.13 2.5 times RCWV or maximum overload voltage whichever is less for 5 sec at room temperature ±2% No visible damage Board Flex/ Bending IEC 60068-2-21 Device mounted on PCB test board as described, only 1 board bending required ±1% No visible damage 3 mm bending Bending time: 60±5 seconds Ohmic value checked during bending www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL SERIES TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability - Wetting IPC/JEDECJ-STD-002B test B Electrical Test not required Well tinned (≥95% covered) No visible damage Magnification 50X 8 8 0402 to 2512 SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds - Leaching IPC/JEDECJ-STD-002B test D Leadfree solder, 260 °C, 30 seconds immersion time No visible damage - Resistance to Soldering Heat IEC 60068-2-58 Condition B, no pre-heat of samples. ±1% Leadfree solder, 260 °C, 10 seconds immersion time No visible damage Procedure 2 for SMD: devices fluxed and cleaned with isopropanol www.yageo.com Apr 26, 2012 V.6 Product specification Chip Resistor Surface Mount RL SERIES 9 9 0402 to 2512 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 6 Apr 26, 2012 - - RL 0402 range extension Version 5 Mar 22, 2010 - - The statement of "Halogen Free" on the cover added - Test methods updated Version 4 Dec 11, 2008 - - Halogen Free Epoxy - Update global part number definition Version 3 Aug 07, 2008 - - Change to dual brand datasheet that describe RL0402 to RL2512 with RoHS compliant - Define global part number Version 2 Jul 15, 2005 - - Ordering example revised Version 1 Apr 15, 2005 - - Size 1218 extended - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape) Version 0 Nov. 10, 2003 - - First issue of this specification “ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.” www.yageo.com Apr 26, 2012 V.6