DATA SHEET

120
DATA SHEET
ARRAY CHIP RESISTORS
YC248 (16Pin/8R)
5%, 1%
sizes 0616
Product specification – Oct 31, 2008 V.2 Supersedes Date of Mar. 06, 2003
RoHS compliant
Product specification
Chip Resistor Surface Mount
YC
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER
This specification describes
YC248 series chip resistor arrays
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER
APPLICATIONS
Terminal for SDRAM and
DDRAM
(1) (2) (3)
Mobile
phone, telecom…
FEATURES
RoHS compliant
-
Products with lead free
terminations meet RoHS
requirements
-
Pb-glass contained in electrodes
-
Resistor element and glass are
exempted by RoHS
Reducing
environmentally
hazardous wastes
component and equipment
reliability
of PCB space
None
forbidden-materials used
in products/production
Halogen
Free Epoxy
(5)
(6)
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
(2) PACKAGING TYPE
R = Paper taping reel
K = Embossed taping reel
(3) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
(4) TAPING REEL
07 = 7 inch dia. Reel
(5) RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Detailed resistance rules show in table of “Resistance rule of global part number”.
(6) OPTIONAL CODE
L = optional symbol (Note)
High
Saving
(4)
(1) TOLERANCE
applications: laptop
computer, desktop computer
electronic equipment:
PDAs, PNDs
( PREFERRED )
YC248 – X X X XX XXXX L
Computer
Consume
2
8
248 (RoHS Compliant)
SERIES
Resistance rule of global part
number
Resistance code rule
Example
0R
0R = Jumper
XRXX
(1 to 9.76 Ω)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
ORDERING EXAMPLE
The ordering code of a YC248
convex chip resistor array, value
1,000 X with ±5% tolerance,
supplied in 7-inch tape reel is:
YC248-JR-071K(L).
NOTE
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER
www.yageo.com
Oct 31, 2008 V.2
Product specification
Chip Resistor Surface Mount
YC
SERIES
3
8
248 (RoHS Compliant)
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
GLOBAL PART NUMBER
( PREFERRED )
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC
CODE
2350
XXX XXXXX L
(1)
TYPE/
0616
ARV381
ARV382
Jumper
(2)
(3)
START TOL. RESISTANCE
IN (1)
RANGE
(%)
2350
2350
2350
±5%
±1%
-
10 to 1 MΩ
10 to 1 MΩ
0Ω
Last digit of 12NC
Resistance decade (3)
(4)
Last digit
0.01 to 0.0976 X
0.1 to 0.976 X
0
053 10xxx
1 to 9.76 X
8
043 1xxxx
10 to 97.6 X
9
100 to 976 X
1
1 to 9.76 KX
2
10 to 97.6 KX
3
100 to 976 KX
4
1 to 9.76 MX
5
10 to 97.6 MX
6
PAPER / PE TAPE ON REEL (units)
(2)
5,000
053 91001
(1) The resistors have a 12-digit ordering code starting with 2350.
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
Example:
7
0.02 X
=
0200 or 200
(4) "L" is optional symbol (Note) .
0.3 X
=
3007 or 307
ORDERING EXAMPLE
1X
=
1008 or 108
The ordering code of a ARV381 resistor, value 1,000 X with ±5%
tolerance, supplied in tape of 5,000 units per reel is: 235005310102(L)
or YC248-JR-071K(L).
33 KX
=
3303 or 333
10 MX
=
1006 or 106
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
www.yageo.com
Oct 31, 2008 V.2
Product specification
Chip Resistor Surface Mount
YC
4
8
248 (RoHS Compliant)
SERIES
MARKING
YC248
0
1-Digit marking
YNSC014
Fig. 1
Jumper = 0 Ω
E-24 series: 3 digits
2
First two digits for significant figure and 3rd digit for number of zeros
YNSC035
Fig. 2
Value = 240 KΩ
For further marking information, please see special data sheet “Chip resistors marking”
CONSTRUCTION
OUTLINES
The resistor is constructed on top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
overcoat
the thick film resistive element. The
resistive layer
composition of the resistive element
inner electrode
is a noble metal imbedded into a
termination
glass and covered by a second glass
ceramic substrate
to prevent environment influences.
The resistor is laser trimmed to the
Fig. 3 Chip resistor outlines
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external terminations (matte tin on Ni-barrier) are added. See fig.3
YNSC069
DIMENSIONS
Table 1
H
TYPE
YC248
B (mm)
0.30 ±0.15
H (mm)
0.45 ±0.05
P (mm)
0.50 ±0.05
L (mm)
4.00 ±0.20
T (mm)
0.45 ±0.10
W1 (mm)
0.40 ±0.15
W2 (mm)
1.60 ±0.15
T
B
W1
W2
P
L
CCB261_b
Fig. 4 YC248 series chip resistors dimension
For dimension see Table 1
SCHEMATIC
For dimension see Fig. 4 and Table 1
16 15 14 13 12 11 10 9
handbook, 2 columns
R1 R2
R3
R4
R5 R6 R7 R8
CCB258_b
Fig. 5 Equivalent circuit diagram
R1=R2=R3=R4=R5=R6=R7=R8
1
2
3
4
5
6
7
8
www.yageo.com
Oct 31, 2008 V.2
Product specification
Chip Resistor Surface Mount
YC
SERIES
ELECTRICAL CHARACTERISTICS
5
8
248 (RoHS Compliant)
FOOTPRINT AND SOLDERING
PROFILES
Table 2
YC248 1/16 W
CHARACTERISTICS
Operating Temperature Range
–55 °C to +155 °C
Maximum Working Voltage
50 V
Maximum Overload Voltage
100 V
Dielectric Withstanding Voltage
100 V
Number of Resistors
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
8
5% (E24) 10 Ω to 1 MΩ
Resistance Range
1% (E24/E96) 10 Ω to 1 MΩ
< 0.05 Ω
Zero Ohm Jumper
Temperature Coefficient
±200 ppm/°C
Jumper Criteria
Rated Current
2.0 A
Maximum Current
10 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
YC248
Paper Taping Reel (R)
7" (178 mm)
5,000 units
Embossed taping reel (K)
7" (178 mm)
4,000 units
NOTE
1. For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
P OWER RATING
YC 248 rated power at 70 °C is 1/16 W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
or max. working voltage whichever is less
handbook, halfpage
P
(%Prated )
MLB206_2
100
50
0
55
0
50
70
100
155
o
Tamb ( C)
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
Fig. 5 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (Tamb)
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
Oct 31, 2008 V.2
Product specification
Chip Resistor Surface Mount
YC
SERIES
6
8
248 (RoHS Compliant)
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Life/
Operational Life/
Endurance
MIL-STD-202G-method 108A
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2%+0.05 Ω)
High
Temperature
Exposure/
Endurance at
upper category
temperature
MIL-STD-202G-method 108A
1,000 hours at maximum operating temperature
depending on specification, unpowered
±(1%+0.05 Ω)
IEC 60115-1 4.25.3
JIS C 5202-7.11
No direct impingement of forced air to the parts
Moisture
Resistance
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
IEC 60115-1 4.25.1
JIS C 5202-7.10
Tolerances: 155±3 °C
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
±(2%+0.05 Ω)
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
Thermal Shock
MIL-STD-202G-method 107G
-55/+155 °C
Note: Number of cycles required is 300. Devices
unmounted
±(0.5%+0.05 Ω) for 10 KΩ to
10 MΩ
±(1%+0.05 Ω) for others
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
Short time
overload
MIL-R-55342D-para 4.7.5
Board Flex/
Bending
IEC60115-1 4.33
IEC60115-1 4.13
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±(2%+0.05 Ω)
Device mounted on PCB test board as described,
only 1 board bending required
±(1%+0.05 Ω)
No visible damage
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
Oct 31, 2008 V.2
Product specification
Chip Resistor Surface Mount
YC
SERIES
7
8
248 (RoHS Compliant)
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
IPC/JEDECJ-STD-002B test B
Electrical Test not required
IEC 60068-2-58
Magnification 50X
Well tinned (≥95% covered)
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
- Leaching
- Resistance to
Soldering Heat
IPC/JEDECJ-STD-002B test D
No visible damage
IEC 60068-2-58
Leadfree solder, 260 °C, 30 seconds
immersion time
MIL-STD-202G-method 210F
Condition B, no pre-heat of samples
±(1%+0.05 Ω)
IEC 60068-2-58
Leadfree solder, 270 °C, 10 seconds
immersion time
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
Oct 31, 2008 V.2
Product specification
Chip Resistor Surface Mount
YC
SERIES
8
8
248 (RoHS Compliant)
REVISION HISTORY
REVISION
DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 2
Oct 31, 2008
-
- Change to dual brand datasheet that describes YC248 with RoHS
compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 1
Feb 22, 2005
-
- New datasheet for 0616 (16Pin/8R) chip resistor arrays 1% and 5%
with lead-free terminations
- Replace the 0616 part of pdf files: ARV381_5_3.pdf and
ARV382_1_4.pdf
- Test method and procedure updated
Version 0
Nov. 10, 2003
-
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
Oct 31, 2008 V.2