PPJX138K 50V N-Channel Enhancement Mode MOSFET – ESD Protected Voltage 50 V SOT-563 350mA Current Unit : inch(mm) Features RDS(ON) , VGS@10V, ID@500mA<1.6Ω RDS(ON) , [email protected], ID@200mA<2.5Ω RDS(ON) , [email protected], ID@100mA<4.5Ω Advanced Trench Process Technology Specially Designed for Battery Operated Systems, SolidState Relays Drivers: Relay, Displays, Memories, etc. ESD Protected Lead free in comply with EU RoHS 2011/65/EU directives. Green molding compound as per IEC61249 Std. (Halogen Free) Mechanical Data Case: SOT-563 Package Terminals : Solderable per MIL-STD-750, Method 2026 Approx. Weight: 0.0003 ounces, 0.0084 grams o Maximum Ratings and Thermal Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL LIMIT UNITS Drain-Source Voltage VDS 50 V Gate-Source Voltage VGS +20 V ID 350 mA IDM 1200 mA 223 mW 1.8 mW/ oC Continuous Drain Current Pulsed Drain Current o Power Dissipation Ta=25 C Derate above 25oC Operating Junction and Storage Temperature Range PD TJ,TSTG -55~150 RθJA 560 o C Thermal resistance - Junction to Ambient (Note 3) March 25,2013-REV.00 o C/W Page 1 PPJX138K o Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS Static Drain-Source Breakdown Voltage BVDSS VGS=0V,ID=250uA 50 - - V Gate Threshold Voltage VGS(th) VDS=VGS, ID=250uA 0.8 1.0 1.5 V VGS=10V,ID=500mA - 0.93 1.6 VGS=4.5V,ID=200mA - 1.2 2.5 VGS=2.5V,ID=100mA - 2.4 4.5 Drain-Source On-State Resistance RDS(on) Ω Zero Gate Voltage Drain Current IDSS VDS=50V,VGS=0V - 0.01 1 uA Gate-Source Leakage Current IGSS VGS=+20V,VDS=0V - +3.0 +10 uA - 0.63 1 - 0.2 - - 0.23 - - - 50 - - 10 - - 5 - 2.2 5 19.2 38 6.2 12 - 23 50 - - 500 mA 0.86 1.5 V Dynamic Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VDS=25V, ID=250mA, VGS=4.5V (Note 1,2) VDS=25V, VGS=0V, f=1.0MHZ nC pF Switching Turn-On Delay Time td(on) Turn-On Rise Time tr Turn-Off Delay Time td(off) Turn-Off Fall Time tf VDD=25V, ID=500mA, VGS=10V, RG=6Ω (Note 1,2) ns Drain-Source Diode Maximum Continuous Drain-Source Diode Forward Current Diode Forward Voltage IS VSD --IS=500mA, VGS=0V NOTES: 1. Pulse width<300us, Duty cycle<2% 2. 3. Essentially independent of operating temperature typical characteristics. RΘJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. mounted on a 1 inch square pad of copper March 25,2013-REV.00 Page 2 PPJX138K TYPICAL CHARACTERISTIC CURVES Fig.1 On-Region Characteristics Fig.2 Transfer Characteristics Fig.3 On-Resistance vs. Drain Current Fig.4 On-Resistance vs. Junction temperature Fig.5 On-Resistance Variation with VGS. Fig.6 Body Dlode Characterlslcs March 25,2013-REV.00 Page 3 PPJX138K TYPICAL CHARACTERISTIC CURVES Fig.7 Gate-Charge Characteristics Fig.8 Breakdown Voltage Variation vs. Temperature Fig.9 Threshold Voltage Variation with Temperature. March 25,2013-REV.00 Page 4 PPJX138K ORDER INFORMATION Order Part Number Package Type Packing type Marking Version PJX138K_R1_00001 SOT-563 4K pcs / 7” reel 8KB Halogen free PJX138K_R2_00001 SOT-563 10K pcs / 13” reel 8KB Halogen free MOUNTING PAD LAYOUT March 25,2013-REV.00 Page 5 PPJX138K Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. March 25,2013-REV.00 Page 6