Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC311SC70 / 311SC70E v04.0814 DRIVER & GAIN BLOCK AMPLIFIERS - SMT InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 8 GHz Typical Applications Features The HMC311SC70(E) is ideal for: P1dB Output Power: +15 dBm • Cellular / PCS / 3G Output IP3: +30 dBm • WiBro / WiMAX / 4G Gain: 15 dB • Fixed Wireless & WLAN Cascadable, 50 Ohm I/O’s • CATV & Cable Modem Single Supply: +5V • Microwave Radio & Test Equipment Industry Standard SC70 Package Functional Diagram General Description The HMC311SC70(E) is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT DC to 8 GHz amplifier. Packaged in an industry standard SC70, the amplifier can be used as either a cascadable 50 Ohm gain stage or to drive the LO port of HMC mixers with up to +15 dBm output power. The HMC311SC70(E) offers 15 dB of gain and an output IP3 of +30 dBm while requiring only 54 mA from a +5V supply. The Darlington topology results in reduced sensitivity to normal process variations, and yields excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifications, Vs= 5V, Rbias= 22 Ohm, TA = +25° C Parameter Min. Typ. 14.0 13.0 12.5 11.0 15.0 15.0 14.5 13.0 Gain DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 6.0 GHz 6.0 - 8.0 GHz Gain Variation Over Temperature DC - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 6.0 GHz 6.0 - 8.0 GHz 0.004 0.007 0.012 0.018 Return Loss Input / Output DC - 8.0 GHz 15 Reverse Isolation DC - 8.0 GHz Output Power for 1 dB Compression (P1dB) DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz 6.0 - 8.0 GHz Output Third Order Intercept (IP3) DC - 2.0 GHz 2.0 - 6.0 GHz 6.0 - 8.0 GHz Noise Figure DC - 8.0 GHz Supply Current (Icq) 13.5 12.0 10.0 8.0 Max. Units dB dB dB dB 0.007 0.012 0.016 0.022 dB/ °C dB/ °C dB/ °C dB 18 dB 15.5 15.0 13.0 11.0 dBm dBm dBm dBm 30 27 24 dBm dBm dBm 5 55 dB 74 mA Note: Data taken with broadband bias tee on device output. 1 For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC311SC70 / 311SC70E v04.0814 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 8 GHz 20 20 15 18 10 16 5 0 S21 S11 S22 -5 -10 14 12 10 +25C -40C +85C 8 -15 6 -20 4 -25 0 1 2 3 4 5 6 7 8 9 0 10 1 2 3 Input Return Loss vs. Temperature 5 6 7 8 Output Return Loss vs. Temperature 0 0 -5 +25C +85C -40C -5 RETURN LOSS (dB) RETURN LOSS (dB) 4 FREQUENCY (GHz) FREQUENCY (GHz) -10 -15 +25C +85C -40C -10 -15 -20 -25 -20 -30 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 FREQUENCY (GHz) 4 5 6 7 8 9 10 9 10 FREQUENCY (GHz) Reverse Isolation vs. Temperature DRIVER & GAIN BLOCK AMPLIFIERS - SMT Gain vs. Temperature GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss Noise Figure vs. Temperature 0 10 8 NOISE FIGURE (dB) REVERSE ISOLATION (dB) 9 -5 +25C +85C -40C -10 -15 -20 +25C +85C -40C 7 6 5 4 3 2 1 -25 0 0 1 2 3 4 5 6 FREQUENCY (GHz) 7 8 9 10 1 2 3 4 5 6 7 8 FREQUENCY (GHz) For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC311SC70 / 311SC70E v04.0814 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 8 GHz 18 16 16 14 14 Psat (dBm) P1dB (dBm) Psat vs. Temperature 18 12 10 +25C +85C -40C 8 10 +25C +85C -40C 6 4 4 0 1 2 3 4 5 6 7 8 9 10 0 1 2 FREQUENCY (GHz) Power Compression @ 1 GHz 16 Pout (dBm), GAIN (dB), PAE (%) 18 16 14 12 10 8 6 4 2 Pout Gain PAE 0 -2 -6 -4 -2 0 2 4 24 22 20 +25C +85C -40C 12 10 2 3 4 5 FREQUENCY (GHz) 9 10 10 Pout Gain PAE 8 6 4 2 0 -2 -6 -4 -2 0 2 4 6 6 7 8 80 40 35 60 30 25 40 20 15 10 5 Gain P1dB Psat IP3 Icq 0 0 4.5 20 4.75 5 5.25 Vs (Vdc) For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 5.5 Icq (mA) IP3 (dBm) 26 GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 28 1 8 Gain, Power, IP3 & Supply Current vs. Supply Voltage @ 1 GHz 30 0 7 INPUT POWER (dBm) 32 14 6 12 -4 -20 -18 -16 -14 -12 -10 -8 6 34 16 5 14 INPUT POWER (dBm) 18 4 Power Compression @ 6 GHz 18 -4 -20 -18 -16 -14 -12 -10 -8 3 FREQUENCY (GHz) Output IP3 vs. Temperature 3 12 8 6 Pout (dBm), GAIN (dB), PAE (%) DRIVER & GAIN BLOCK AMPLIFIERS - SMT P1dB vs. Temperature HMC311SC70 / 311SC70E v04.0814 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 8 GHz Collector Bias Voltage (Vcc) +7V RF Input Power (RFIN)(Vcc = +3.9V) +10 dBm Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 5.21 mW/°C above 85 °C) 0.34 W Thermal Resistance (junction to lead) 191 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED DRIVER & GAIN BLOCK AMPLIFIERS - SMT Absolute Maximum Ratings PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD MATERIAL: COPPER ALLOY 3. LEAD PLATING: Sn/Pb 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC311SC70 Low Stress Injection Molded Plastic Sn/Pb MSL1 [1] HMC311SC70E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking 311E 311E [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC311SC70 / 311SC70E v04.0814 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 8 GHz DRIVER & GAIN BLOCK AMPLIFIERS - SMT Pin Descriptions Pin Number Function Description Interface Schematic 1, 2, 4, 5 GND These pins must be connected to RF/DC ground. 3 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 6 RFOUT RF output and DC Bias for the output stage. Application Circuit Note: 1. Select Rbias to achieve Icq using equation below, Rbias > 22 Ohm. 2. External blocking capacitors are required on RFIN and RFOUT. Icq = Vs - 3.8 Rbias Recommended Component Values Component 5 Frequency (MHz) 50 900 1900 2200 2400 3500 5200 5800 L1 270 nH 56 nH 22 nH 22 nH 15 nH 8.2 nH 3.3 nH 3.3 nH C1, C2 0.01 µF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC311SC70 / 311SC70E v04.0814 InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 8 GHz DRIVER & GAIN BLOCK AMPLIFIERS - SMT Evaluation PCB List of Materials for Evaluation PCB 118040 Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1 - C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 µF Capacitor, Tantalum R1 22 Ohm Resistor, 1210 Pkg. L1 22 nH Inductor, 0603 Pkg. U1 HMC311SC70 / HMC311SC70E PCB [2] 117360 Evaluation PCB [1] The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 6