ETC IPC3SAD

04-Serie IP-A_08-Serie IP-A 21/11/12 14:28 Page15
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications
❑ Illuminated or non-illuminated
❑ Tactile feedback
❑ Wide variety of configurations
❑ Flat round actuator for optional marking
❑ Sealed to IP67
B1
ENVIRONMENTAL SPECIFICATIONS
GENERAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load (gold plated silver contacts):
5A 28VDC, 70.000 cycles
0,2A 48VDC, 500.000 cycles
0,5A 48VAC, 500.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms
• Contact bounce : 10 ms
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S)
20mA
Typ. forward voltage Max. forward voltage
2,1V
2,3V
Yellow (L0Y)
20mA
2,1V
2,3V
Green (L0G)
20mA
2,1V
2,3V
Blue (L0B)
20mA
3,2V
3,8V
White (L0W)
20mA
3,35V
4,25V
• Panel thickness : 1,5 mm (.059) min.
4 mm (.157 max.)
• Total travel :
Funct. 3 : 1,7 mm (.067) +/- 0,3 mm
Funct. 5 : 1,3 mm (.051) +/- 0,3 mm
• Typical operating force : 6N +/- 2N
• Low level/mech. life : 1.000.000 cycles
• Torque : 1,5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
MATERIALS
• Case : thermoplastic UL94-V0
• Actuator : polyamide 6/6
• Bushing/bezel : zinc die-cast
(zamac), black painted
• Contacts : silver, gold plated (std)
brass, gold plated (for option 104)
• Multi-wire lead AWG20,
section 0,6 mm2
• LED wire : AWG26, section 0,12 mm2
• Lens : polycarbonate
• Terminal seal : epoxy
AGENCY APPROVAL
2A 125VAC/250VAC
File E83438
Availability : consult factory for
details of approved models.
Marking : to order switches marked
UL, complete ordering format.
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
MOUNTING
Matrix mounting
12.90
(.507)
Ø13.60
(.535DIA)
➀ O-ring
APEM
20.00
(.787)
20.00
(.787)
1
20.00
(.787)
Back of panel space requirement
17.50
(.688)
1.50min-4Max
(.059 min-.157max)
Panel cut-out
Ø13.50
(.531DIA)
www.apem.com
B1-15
04-Serie IP-A_08-Serie IP-A 21/11/12 14:28 Page16
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Overview
IP
SERIES
Electrical functions
Actuator shapes
C
R
P
Square
Round, curved
Round, flat
3
5
Normally open
(NO)
NC/NO combined
(non-illuminated)
Terminals
S
F
P
Z1
Solder lugs
Flying leads
Straight PC
Quick-connect
(non-ill., NO only )
Contacts
AD Silver, gold
plated (standard)
CD Brass, gold
plated (option 104)
B1
Actuator colours
1
B
2
3
5
6
7/1
8
9
Blue
Dark blue
Black
Green
Yellow
Red
White
Bright chrome
Orange
LED colours
Blank
L0S
L0Y
L0G
L0B
L0W
Non-illum.
Super red
Yellow
Green
Blue
White
Approval
Options
100
101
104
Satin chrome
bezel
Bright chrome
bezel
High actuator
(non-illum. round
models only)
UL
Consult factory for
detail of approved
models.
Option 104
If combined with electrical function 5 (NC/NO), this
option should be ordered with CD contacts (brass, gold
plated). Current/voltage rating : 100mA 30VDC
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
A sealing boot is available to protect the switches against frost and sand. It is presented after the IA series and in section H.
Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-ring.
Hex nut part number U166.
Packaging unit : 25 pieces
B1-16
www.apem.com
APEM
04-Serie IP-A_08-Serie IP-A 21/11/12 14:28 Page17
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Square - illuminated
• High brightness illumination
• Five LED colours
• Tin plated LED terminals
LED
Cathode
(-)
MODEL
STRUCTURE
B1
1.50
(.059)
Also available with straight PC terminals : IPC3PAD
LED colour is indicated by the bottom of the switch.
1.50 Min
(.059 Min)
Ø12.00x0.75SI
(.472DIAx0.75IS)
EPOXY
1.20
(.047)
0.40
(.015)
2.00
(.078)
5.08
(.200)
2.00
(.078)
5.00
(.196)
17.50
(.688SQ)
6.80
(.267)
Ø12.00x0.75SI
(.472DIAx0.75IS)
500±10
(19.68±.393)
16.00 Max
(.629 Max)
Normally Open
12.00
(.472SQ)
1.50 Min
(.059 Min)
➞ Flat
Sealed flying lead terminals
IPC3FAD
17.50
(.688SQ)
5.20
(.204)
Normally Open
6.10
(.240)
IPC3SAD
6.40 6.80
(.251) (.267)
5.00
(.196)
12.00
(.472SQ)
2.00
(.078)
➞ Flat
Solder lug terminals
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
ACTUATOR COLOURS
LED COLOURS
1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow
6 : red - 7/1 : white - 8 : bright chrome - 9 : orange
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
OPTIONS
APPROVAL
100 : Satin chrome bezel
101 : Bright chrome bezel
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
APEM
www.apem.com
B1-17
04-Serie IP-A_08-Serie IP-A 21/11/12 14:28 Page18
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Square - non-illuminated
• Double function (NC/NO combined)
with a short behind-panel depth
8.70
(.342)
2.40
(.094)
Quick-connect Z1
4.55
(.179)
5.20
(.204)
Straight P
1.00
(.039)
Function 3 (N0)
Function 5 (NC/NO)
MODEL
STRUCTURE
Normally Open
IPC5SAD
NC/NO combined
1.50 Min
(.059 Min)
Ø12.00x0.75SI
(.472DIAx0.75IS)
NO
1.50
(.059)
EPOXY
Also available with straight PC terminals : IPC3PAD (NO) or IPC5PAD (NC/NO)
and quick-connect terminals : IPC3Z1AD (NO only)
17.50
(.688SQ)
1.20
(.047)
0.40
(.015)
2.00
(.078)
5.08
(.200)
NO
NO
NC
5.20
(.204)
IPC3SAD
6.40 6.80
(.251) (.267)
5.00
(.196)
12.00
(.472SQ)
2.00
(.078)
➞ Flat
Solder lug terminals
NC/NO
NC/NO combined
17.50
(.688SQ)
Ø12.00x0.75SI
(.472DIAx0.75IS)
500±10
(19.68±.393)
IPC5FAD
2.00
(.078)
5.00
(.196)
Normally Open
6.80
(.267)
IPC3FAD
12.00
(.472SQ)
1.50 Min
(.059 Min)
➞ Flat
Sealed flying lead terminals
16.00 Max
(.629 Max)
B1
1.20
(.047)
2.80
(.110)
NO
NC/NO
Wire colours (NC/NO) : black : NO, blue : NC
ACTUATOR COLOURS
1 : blue - B : dark blue -2 : black - 3 : green - 5 : yellow - 6 : red - 7/1 : white - 8 : bright chrome - 9 : orange
OPTIONS
APPROVAL
100 : Satin chrome bezel
101 : Bright chrome bezel
UL
B1-18
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
www.apem.com
APEM
04-Serie IP-A_08-Serie IP-A 21/11/12 14:28 Page19
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Round - illuminated
• High brightness illumination
• Five LED colours
• Tin plated LED terminals
LED
Cathode
(-)
LED
Cathode
(-)
MODEL
STRUCTURE
B1
1.50 Min
(.059 Min)
Ø12.00x0.75SI
(.472DIAx0.75IS)
5.08
(.200)
Ø17.50
(.688DIA)
5.00
(.196)
6.80
(.267)
Ø12.00x0.75SI
(.472DIAx0.75IS)
500±10
(19.68±.393)
Normally Open
Ø12.00
(.472DIA)
5.20
(.204)
2.00
(.078)
16.00 Max
(.629 Max)
IPR3FAD
0.40
(.015)
➞ Flat
Sealed flying lead terminals
EPOXY
1.20
(.047)
1.50 Min
(.059 Min)
1.50
(.059)
Also available with straight PC terminals : IPR3PAD
LED colour is indicated by the bottom of the switch.
Ø17.50
(.688DIA)
2.00
(.078)
Normally Open
6.10
(.240)
IPR3SAD
6.40 6.80
(.251) (.267)
5.00
(.196)
Ø12.00
(.472DIA)
2.00
(.078)
➞ Flat
Solder lug terminals
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
ACTUATOR COLOURS
LED COLOURS
1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow
6 : red - 7/1 : white - 8 : bright chrome - 9 : orange
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
L0W : white
OPTIONS
APPROVAL
100 : Satin chrome bezel
101 : Bright chrome bezel
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
APEM
www.apem.com
B1-19
04-Serie IP-A_08-Serie IP-A 21/11/12 14:28 Page20
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Round - non-illuminated
• Double function (NC/NO combined)
with a short behind-panel depth
Function 3 (NO)
2.40
(.094)
8.70
(.342)
1.00
(.039)
Function 5 (NC/NO)
2.80
(.110)
1.20
(.047)
MODEL
STRUCTURE
Actuator marking available on IPP models (symbol 10 mm max.). On request.
1.50 Min
(.059 Min)
5.00
(.196)
Ø17.50
(.688DIA)
Ø12.00x0.75SI
(.472DIAx0.75IS)
NO
1.50
(.059)
1.20
(.047)
2.00
(.078)
NO
NC
EPOXY
0.40
(.015)
5.20
(.204)
Flat actuator, NO
IPP3SAD
Flat actuator, NC/NO
IPP5SAD
6.40 6.80
(.251) (.267)
Curved actuator, NO
IPR3SAD
Curved actuator, NC/NO
IPR5SAD
Ø12.00
(.472DIA)
2.00
(.078)
➞ Flat
Solder lug terminals
5.08
(.200)
NO
NC/NO
Also available with straight PC terminals : IP•3PAD (NO) or IP•5PAD (NC/NO)
and quick-connect terminals : IP•3Z1AD (NO only)
1.50 Min
(.059 Min)
5.00
(.196)
Ø17.50
(.688DIA)
6.80
(.267)
Curved actuator, NO
IPR3FAD
Curved actuator, NC/NO
IPR5FAD
Ø12.00
(.472DIA)
2.00
(.078)
➞ Flat
Sealed flying lead terminals
Ø12.00x0.75SI
(.472DIAx0.75IS)
Flat actuator, NO
IPP3FAD
Flat actuator, NC/NO
IPP5FAD
NO
500±10
(19.68±.393)
13.20
(.519)
NC/NO
Wire colours (NC/NO) : black : NO, blue : NC
OPTIONS
1 : blue - B : dark blue -2 : black - 3 : green - 5 : yellow
6 : red - 7/1 : white - 8 : bright chrome - 9 : orange
100 : Satin chrome bezel
101 : Bright chrome bezel
104 : High actuator - If combined with function 5
(NC/NO), order with CD contacts (instead of AD contacts).
APPROVAL
Ø12.00
(.472DIA)
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
B1-20
www.apem.com
104
IPR
Ø12.00
(.472DIA)
104
4.70
(.185)
ACTUATOR COLOURS
4.70
(.185)
B1
Quick-connect Z1
4.55
(.179)
5.20
(.204)
Straight P
IPP
APEM