Document 168-1 Chip Inductors – 0805HT (2012) At just 0.035″ high, these are one of our lowest profile surface mount inductors. Their wire wound ceramic design provides tight tolerances, exceptional Q and high SRF values. Coilcraft Designer’s Kit C321 contains samples of all 5% parts shown as stocked. To order, contact Coilcraft or visit http://order.coilcraft.com to purchase on-line. SRF min5 Percent DCR max6 Irms7 Color Q min4 (MHz) (Ohms)(mA) Code Part number1 Inductance2 (nH) tolerance3 0805HT-1N8TJL_ 0805HT-2N0TJL_ 0805HT-3N9TJL_ 0805HT-4N3TJL_ 0805HT-4N7TJL_ 0805HT-5N1TJL_ 0805HT-5N6TJL_ 0805HT-6N8TJL_ 0805HT-7N5TJL_ 0805HT-8N2TJL_ 0805HT-9N1TJL_ 0805HT-10NT_L_ 0805HT-12NT_L_ 0805HT-15NT_L_ 0805HT-18NT_L_ 0805HT-20NT_L_ 0805HT-22NT_L_ 0805HT-27NT_L_ 0805HT-33NT_L_ 0805HT-39NT_L_ 0805HT-47NT_L_ 0805HT-56NT_L_ 0805HT-68NT_L_ 0805HT-82NT_L_ 0805HT-R10T_L_ 0805HT-R12T_L_ 0805HT-R15T_L_ 0805HT-R18T_L_ 0805HT-R22T_L_ 0805HT-R27T_L_ 0805HT-R33T_L_ 0805HT-R39T_L_ 0805HT-R47T_L_ 0805HT-R50T_L_ 1.8@ 250 MHz 2.0@ 250 MHz 3.9@ 250 MHz 4.3@ 250 MHz 4.7@ 250 MHz 5.1@ 250 MHz 5.6@ 250 MHz 6.8@ 250 MHz 7.5@ 250 MHz 8.2@ 250 MHz 9.1@ 250 MHz 10@ 250 MHz 12@ 250 MHz 15@ 250 MHz 18@ 250 MHz 20@ 250 MHz 22@ 250 MHz 27@ 250 MHz 33@ 250 MHz 39@ 250 MHz 47@ 200 MHz 56@ 200 MHz 68@ 200 MHz 82@ 150 MHz 100@ 150 MHz 120@ 150 MHz 150@ 150 MHz 180@ 150 MHz 220@ 150 MHz 270@ 150 MHz 330@ 150 MHz 390@ 100 MHz 470@ 100 MHz 500@ 50 MHz 5 5 5 5 5 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 55 @ 1500 MHz 55 @ 1500 MHz 50 @ 1000 MHz 80 @ 1000 MHz 50 @ 1000 MHz 45 @ 1000 MHz 45 @ 1000 MHz 50 @ 1000 MHz 47 @ 1000 MHz 50 @ 1000 MHz 54 @ 1000 MHz 55 @ 750 MHz 55 @ 750 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 55 @ 500 MHz 55 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 40 @ 250 MHz 40 @ 250 MHz 40 @ 250 MHz 39 @ 150 MHz 33 @ 150 MHz 32 @ 150 MHz 30 @ 150 MHz 30 @ 150 MHz 20 @ 50 MHz 1. When ordering, specify tolerance, termination and packaging codes: 0805HT-R22TGLC Termination:L =RoHS compliant silver-palladium-platinum-glass frit. E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Tolerance: F=1% G = 2% J = 5% (Table shows stock tolerances in bold.) Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 9400 11500 6100 6364 5500 6100 5800 4800 4600 4800 3900 3300 3800 2950 3100 2700 2900 2450 2350 2200 2000 1850 1500 1500 1200 1150 1050 830 820 790 730 675 610 585 0.030 0.018 0.055 0.030 0.060 0.069 0.091 0.080 0.082 0.080 0.105 0.080 0.10 0.10 0.13 0.17 0.15 0.19 0.19 0.27 0.30 0.39 0.40 0.44 0.64 0.68 0.80 0.86 1.29 1.40 1.93 2.80 3.10 3.20 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 700 600 600 600 500 500 500 400 300 300 300 200 200 200 200 200 200 Black Violet Brown White Red Blue Gray Orange Black Yellow Red Green Blue Violet Gray Yellow White Black Brown Red Orange Yellow Green Blue Violet Gray White Black Orange Yellow Green Blue Violet Gray 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture and on an Agilent/HP 8753D with a Coilcraft SMD-D test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 168-1 Revised 01/18/12 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 168-2 0805HT Series (2012) Typical Q vs Frequency Typical L vs Frequency 120 12 nH 100 3.9 nH 150 nH 150 Inductance (nH) 39 nH 80 Q factor 200 22 nH 120 nH 60 40 100 82 nH 50 33 nH 20 18 nH 0 3.9 nH 0 10 1000 100 10000 1 10 Irms Derating 1000 10000 Designer’s Kit C321 contains samples of all 5% tolerance parts Core material Ceramic 120 Environmental RoHS compliant, halogen free optional 110 Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. 100 90 Weight 6.0 – 6.9 mg 80 Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current 70 Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C 60 Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 50 40 Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C 30 Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) 25°C Percent of rated Irms 100 Frequency (MHz) Frequency (MHz) 20 10 Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) B overall H C F A E terminal Pick and place material PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. I G J F I Terminal wraparound: approx 0.010/0,25 both ends Packaging 2000/7″ reel; 7500/13″ reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 0.9 mm pocket depth Recommended Land Pattern A B C max max max E F G H IJ 0.0850.0600.0350.0500.0170.0450.0700.0400.030 inches 2,161,520,891,270,431,141,781,020,76mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 168-2 Revised 01/18/12 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.