Document 198-1 Chip Inductors – 0402CS (1005) Typical L vs Frequency 60 120 110 100 56 nH 90 80 70 60 50 40 30 25°C This series shares all of the characteristics of Coilcraft’s other ceramic inductors: exceptionally high Q factors, especially at use frequencies; outstanding self-resonant frequency; tight inductance tolerance; and excellent batch-to-batch consistency. Irms Derating Percent of rated Irms Continuing in our long tradition of innovation and leadership, Coilcraft introduced the industry’s first 0402 wirewound inductor. 20 10 50 0 Inductance (nH) -40 0 30 40 60 80 100 120 140 A 10 0 1 10 100 1000 10000 Frequency (MHz) 120 110 12 nH 5.6 nH 19 nH 27 nH 100 90 80 70 56 nH 60 1 nH 40 30 20 10 1 10 100 1000 Frequency (MHz) E terminal Pick and place material H I G J F I Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern ABCD maxmaxmax ref E F G H IJ 0.0470.0250.0260.0100.0200.0090.0220.0260.0140.018inches 1,190,640,660,250,510,230,560,660,360,46 mm Typical Q vs Frequency 50 D F 19 nH 5.6 nH 1 nH C B overall 27 nH 20 0 20 Ambient temperature (°C) 12 nH Q Factor -20 40 10000 Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 0.8 – 1.0 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 or 5000 per 7″ reel Paper tape: 8 mm wide, 1.68 mm thick, 2 mm pocket spacing PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 198-1 Revised 05/03/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 198-2 Designer’s Kits C328A and B contain 20 each of all 5% values Designer’s Kits C328A-2 and B-2 contain 20 each of all 2% values 0402CS Series (1005) Inductance2Percent tolerance3 Part number1(nH) 900 MHz L typ Q typ4 SRF min5 DCR max6 Irms7 1.7 GHz L typ Q typ4 (GHz) (Ohms)(mA) 0402CS-1N0XJL_1.05 1.0277 1.02 69 12.70 0.0451360 0402CS-1N2XJL_1.25 1.1728 1.17 38 12.90 0.090 740 0402CS-1N8XJL_1.85,3,2 1.7854 1.78 75 12.00 0.0701040 0402CS-1N9XJL_1.95,3,2 1.7268 1.74 82 11.30 0.0701040 0402CS-2N0X_L_2.05,3,2 1.9354 1.93 75 11.10 0.0701040 0402CS-2N2X_L_2.25,3,2 2.1959 2.23100 10.80 0.070 960 0402CS-2N4X_L_2.45,3,2 2.2451 2.27 68 10.50 0.068 790 0402CS-2N7X_L_2.75,3,2 2.5842 2.60 61 10.40 0.120 640 0402CS-3N3X_L_3.35,3,23.10 653.12 877.00 0.066 840 0402CS-3N6X_L_3.65,3,23.56 453.62 716.80 0.066 840 0402CS-3N9X_L_3.95,3,23.89 504.00 756.00 0.066 840 0402CS-4N3X_L_4.35,3,24.19 474.30 716.00 0.091 700 0402CS-4N7X_L_4.75,3,24.55 484.68 684.77 0.130 640 0402CS-5N1X_L_5.15,3,25.15 565.25 824.80 0.083 800 0402CS-5N6X_L_5.65,3,25.16 545.28 814.80 0.083 760 0402CS-6N2X_L_6.25,3,26.16 526.37 764.80 0.083 760 0402CS-6N8X_L_6.85,3,26.56 636.93 784.80 0.083 680 0402CS-7N5X_L_7.55,3,27.91 608.22 884.80 0.10 680 0402CS-8N2X_L_8.25,3,28.50 578.85 844.40 0.10 680 0402CS-8N7X_L_8.75,3,28.78 549.21 734.10 0.20 480 0402CS-9N0X_L_9.05,3,29.07 629.53 784.16 0.10 680 0402CS-9N5X_L_9.55,3,29.42 549.98 694.00 0.20 480 0402CS-10NX_L_10 5,3,2 9.850 10.1067 3.90 0.20 480 0402CS-11NX_L_11 5,3,2 10.752 11.2078 3.68 0.12 640 0402CS-12NX_L_12 5,3,2 11.953 12.7071 3.60 0.12 640 0402CS-13NX_L_13 5,3,2 13.451 14.6357 3.45 0.21 440 0402CS-15NX_L_15 5,3,2 14.655 15.5077 3.28 0.17 560 0402CS-16NX_L_16 5,3,2 16.646 18.8647 3.10 0.22 560 0402CS-18NX_L_18 5,3,2 18.357 20.2862 3.10 0.23 420 0402CS-19NX_L_19 5,3,2 19.150 21.1067 3.04 0.20 480 0402CS-20NX_L_20 5,3,2 20.752 23.6653 3.00 0.25 420 0402CS-22NX_L_22 5,3,2 23.253 26.7553 2.80 0.30 400 0402CS-23NX_L_23 5,3,2 23.849 26.9064 2.72 0.30 400 0402CS-24NX_L_24 5,3,2 25.151 29.5050 2.70 0.30 400 0402CS-27NX_L_27 5,3,2 28.749 33.5063 2.48 0.30 400 0402CS-30NX_L_30 5,3,2 31.146 38.5039 2.35 0.30 400 0402CS-33NX_L_33 5,3,2 34.931 41.7432 2.35 0.30 400 0402CS-36NX_L_36 5,3,2 39.544 48.4053 2.32 0.44 320 0402CS-39NX_L_39 5,3,2 41.747 50.2345 2.10 0.55 200 0402CS-40NX_L_40 5,3,2 39.044 47.4033 2.24 0.44 320 0402CS-43NX_L_43 5,3,2 45.846 61.5534 2.03 0.81 100 0402CS-47NX_L_47 5,3,2 50.0 38– –2.10 0.83 150 0402CS-51NX_L_51 5,3,2 56.6 40– –1.75 0.82 100 0402CS-56NX_L_56 5,3,2 62.8 42– –1.76 0.97 100 0402CS-68NX_L_68 5,3,2 78.2 36– –1.62 1.12 100 0402CS-82NX_L_82 5,3,2– –– –1.26 1.5550 0402CS-R10X_L_100 5,3,2– –– –1.16 2.0030 0402CS-R12X_L_120 5,3,2– –– –1.90 2.2050 1. When ordering, specify tolerance, termination and packaging codes: 0402CS-68NXJLW Tolerance: G=2% H = 3% J = 5% (Table shows stock tolerances in bold.) Termination:L =RoHS compliant silver-palladium-platinum-glass frit. E =Halogen free component. RoHS compliant silverpalladium- platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging:W =7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Q =7″ machine-ready reel. EIA-481 punched paper tape (5000 parts per full reel). U=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. For SRF >6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD‑D test fixture. For SRF ≤6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD‑D test fixture. 6. DCR measured on a micro-ohmmeter. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 198-2 Revised 05/03/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.