Document 699-1 Chip Inductors - 0201DS Series (0603) Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. • 0201 size; world’s smallest wirewound inductor • 32 inductance values from 0.5 to 14 nH Inductance2Percent Part number1 (nH) tolerance 0201DS-0N5XKL_0.5 10 0201DS-0N6XKL_0.6 10 0201DS-1N2XJL_1.2 5 0201DS-1N3XJL_1.3 5 0201DS-1N4XJL_1.4 5 0201DS-1N5XJL_1.5 5 0201DS-2N2XJL_2.2 5 0201DS-2N3XJL_2.3 5 0201DS-2N4XJL_2.4 5 0201DS-2N5XJL_2.5 5 0201DS-3N3XJL_3.3 5 0201DS-3N4XJL_3.4 5 0201DS-3N5XJL_3.5 5 0201DS-3N6XJL_3.6 5 0201DS-3N7XJL_3.7 5 0201DS-3N8XJL_3.8 5 0201DS-3N9XJL_3.9 5 0201DS-4N8XJL_4.8 5 0201DS-5N2XJL_5.2 5 0201DS-5N5XJL_5.5 5 0201DS-6N7XJL_6.7 5 0201DS-7N0XJL_7.0 5 0201DS-7N5XJL_7.5 5 0201DS-8N2XJL_8.2 5 0201DS-8N7XJL_8.7 5 0201DS-9N0XJL_9.0 5 0201DS-9N4XJL_9.4 5 0201DS-9N6XJL_9.6 5 0201DS-11NXJL_11.0 5 0201DS-12NXJL_12.0 5 0201DS-13NXJL_13.0 5 0201DS-14NXJL_14.0 5 900 MHz L typ Q typ3 0.50 29 0.58 31 1.16 42 1.24 38 1.35 27 1.47 28 2.23 32 2.28 45 2.36 35 2.50 31 3.31 42 3.38 42 3.41 44 3.53 40 3.65 39 3.81 38 3.89 35 4.83 34 5.21 36 5.49 35 6.71 40 6.97 39 7.44 36 8.14 37 8.68 38 9.02 42 9.38 36 9.62 38 11.11 40 12.15 39 13.12 38 14.13 37 1. When ordering, please specify termination and packaging codes: 0201DS-14NXJLW Termination:L =RoHS compliant silver-platinum-glass frit. E =Halogen free component. RoHS compliant matte tin over nickel over silver terminations. Packaging:W =7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture. 4. SRF measured using an Agilent/HP 8722ES network analyzer and a test fixture with a 0.010″ air gap. 5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 6. Current that causes a 15°C temperature rise from 25°C ambient. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. SRF typ4 DCR max5 1.7 GHz L typ Q typ3(GHz) (Ohms) 0.4943 23.5 0.020 0.5851 24.5 0.030 1.1660 17.9 0.042 1.2457 17.6 0.048 1.3437 17.0 0.080 1.4740 17.0 0.090 2.2332 16.7 0.070 2.2864 16.5 0.070 2.3653 13.0 0.082 2.4944 12.5 0.165 3.3262 12.8 0.080 3.4262 12.7 0.080 3.4564 12.4 0.080 3.5761 12.5 0.105 3.6658 10.6 0.105 3.8160 10.2 0.180 3.8950 11.2 0.240 4.8350 11.0 0.096 5.2155 10.0 0.170 5.4950 9.5 0.285 6.7259 6.8 0.150 6.9760 6.7 0.210 7.4650 6.8 0.340 8.2253 6.4 0.270 8.7459 6.3 0.350 9.0463 6.4 0.350 9.3951 6.4 0.400 9.6453 6.2 0.400 11.1562 5.7 0.400 12.2056 5.6 0.360 13.22 52 6.7 0.440 14.3751 5.1 0.440 Irms6 (mA) 1250 1000 870 820 630 600 700 670 620 440 630 630 630 550 550 420 360 570 430 330 460 390 300 340 300 300 280 280 280 300 270 270 Designer’s Kit C425 contains 20 each of all values Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-platinum-glass frit. Weight 0.14 – 0.23 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7″ reel. Paper tape: 8 mm wide, 0.6 mm thick, 2 mm pocket spacing PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 699-1 Revised 03/19/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 699-2 0201DS Chip Inductor Series (0603) Typical Q vs Frequency Typical L vs Frequency 100 18 80 16 2.3 nH 3.9 nH 7.0 nH 60 50 12.0 nH 40 30 Inductance (nH) 90 70 Q Factor 20 0.6 nH 14 12.0 nH 12 10 8 7.0 nH 6 20 4 3.9 nH 10 2 2.3 nH 0 1 10 100 1000 0 10000 0.6 nH 1 10 100 10000 Frequency (MHz) Frequency (MHz) Irms Derating B overall 120 Pick and place material C D 110 H G F A 100 G D 90 80 E terminal 70 60 A max B max 50 Terminal wraparound: approx 0.006/0,15 both ends C max D E F Recommended Land Pattern G H 0.0230.018 0.01770.0040.0150.0090.0070.018inches 40 0,580,46 0,450,100,380,230,180,46mm 30 25°C Percent of rated Irms 1000 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 699-2 Revised 03/19/13 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.