HH-106 / -107 180o Hybrid Junction, 2 - 200 MHz Rev. V3 Features FP-2 (HH-106) • 0° - 180° Hybrid with Symmetrical Time Delay Between Ports • Available in Flatpack and Connectorized Packages • MIL-STD-202 Screening Available Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90° or 180° phase d i ff e r e n t i a l and for Q u a d r a tu r e combining or performing summation/differential combining. C-8-107 (HH-107) Pin Configuration (HH-106) Pin No. Function Pin No. Function 1 A 5 B 2 GND 6 GND 3 GND 7 GND 4 C 8 D Functional Diagram 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. HH-106 / -107 180o Hybrid Junction, 2 - 200 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 2 - 200 MHz dB — — 1.0 Isolation A-B 2 - 200 MHz 5 - 50 MHz 2 - 200 MHz 5 - 50 MHz dB dB dB dB 25 30 30 35 — — — — C-D Amplitude Balance — 2 - 200 MHz dB — — 0.3 VSWR — 2 - 200 MHz 5 - 50 MHz Ratio Ratio — — — — 1.5:1 1.3:1 Phase Balance — 2 - 200 MHz ° — — 3 Impedance — 2 - 200 MHz Ohms — 50 — Input Power — 2 - 200 MHz Watts — — 1 1. All specifications apply with 50 ohm source and load impedance. Typical Performance Curves Ordering Information Part Number Package HH-106 PIN FP-2 HH-107 BNC C-8-107 HH-107 SMA C-8-107 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.