MA-COM HH

HH- / HHS-109
Hybrid Junction, 5 - 200 MHz
Rev. V3
Features
FP-2 (HH-109)
• 0° - 180° Hybrid with High Isolation
• Usable from 500 KHz - 500 MHz
• MIL-STD-202 Screening Available
Description
3 dB Hybrids are ideal for dividing a signal into two
signals of equal amplitude and a constant 90° or
180° phase differential and for Quadrature
combining or performing summation/differential
combining.
SF-1 (HHS-109)
Pin Configuration (HH-109)
Pin No.
Function
Pin No.
Function
1
A
5
B
2
GND
6
GND
3
GND
7
GND
4
C
8
D
Functional Diagram
C
0°
A
Pin Configuration (HHS-109)
0°
Hybrid
Magic
Tee
180°
Pin No.
Function
Pin No.
Function
1
A
3
B
2
C
4
D
B
0°
D
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
HH- / HHS-109
Hybrid Junction, 5 - 200 MHz
Rev. V3
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
Less Coupling
5 - 200 MHz
dB
—
—
1.4
5 - 100 MHz
100 - 200 MHz
dB
dB
30
25
—
—
—
—
Isolation
Amplitude Balance
—
5 - 200 MHz
dB
—
—
0.3
VSWR
—
5 - 100 MHz
100 - 200 MHz
Ratio
Ratio
—
—
—
—
1.5:1
1.7:1
Phase Balance
—
5 - 100 MHz
100 - 200 MHz
°
°
—
—
—
—
4
8
Impedance
—
—
Ohms
—
50
—
Input Power
—
—
Watts
—
—
0.5
1. All specifications apply with 50 ohm source and load impedance.
Typical Performance Curves
Insertion Loss
Isolation
P orts A- C, A- D
P orts A- B, C- D
3
60
50
2
40
1
30
20
0
0.5
1.0
2.0
5.0
10.0
20.0
50.0
100.0 200.0 500.0
1
1
2
5
10
20
50
100
200
500
Frequency (MHz)
Frequency (MHz)
VSWR
Ordering Information
All P orts
3.00
Part Number
Package
HH-109 PIN
FP-2
HHS-109 PIN
SF-1
2.50
2.00
1.50
1.00
0.5
1.0
2.0
5.0
10.0 20.0 50.0 100.0 200.0 500.0
Frequency (GHz)
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.