PE01S/D series 1W DC/DC CONVERTER, SIP-Package, High Efficiency FEATURES Efficiency up to 88.5% SIP Package with Industry Standard Pinout Semi-regulated Output Voltage Isolation Voltage 1000VDC Operating Temperature Range –40°C to +85°C UL/IEC/EN 60950-1 Safety Single and Dual Outputs Lead free, RoHs Compliant >2 MHours MTBF CSA / NRTL60950-1 safety approval 3 Years Product Warranty The PE01S/D series are miniature, SIP Package, isolated 1W DC/DC converters with 1,000VDC isolation and very high efficiency . It offers short circuit protection and allows a wide operating temperature range of –40°C to +85°C. These products provide a typical load regulation of 2.5% to 5.0% depending on each model. The PE01S/D DC/DC converters are a compromise between a fully regulated converter and a non-regulated converter . These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. Model List Model Number PE01S0505A PE01S0509A PE01S0512A PE01S0515A PE01D0505A PE01D0509A PE01D0512A PE01D0515A PE01S1205A PE01S1209A PE01S1212A PE01S1215A PE01D1205A PE01D1209A PE01D1212A PE01D1215A PE01S2405A PE01S2409A PE01S2412A PE01S2415A PE01D2405A PE01D2409A PE01D2412A PE01D2415A Input Voltage (Range) Output Voltage VDC VDC 5 9 12 15 ±5 ±9 ±12 ±15 5 9 12 15 ±5 ±9 ±12 ±15 5 9 12 15 ±5 ±9 ±12 ±15 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) DS_PE01S/D_03152012 Output Current Input Current Max. Min. @Max.Load @No Load mA 200 110 84 67 ±100 ±56 ±42 ±34 200 110 84 67 ±100 ±56 ±42 ±34 200 110 84 67 ±100 ±56 ±42 ±34 mA 4 2 1.5 1 ±2 ±1 ±0.8 ±0.7 4 2 1.5 1 ±2 ±1 ±0.8 ±0.7 4 2 1.5 1 ±2 ±1 ±0.8 ±0.7 mA(typ.) 238 228 232 230 237 234 233 236 99 95 95 95 99 98 95 94 50 48 48 48 50 49 48 49 mA(typ.) 30 12 11 Load Reflected Max. capacitive Efficiency Regulation Ripple Load (typ.) @Max.oad % (max.) 6.5 5 5.2 5 5.2 4.2 4.6 4.5 5 3.4 3.4 2.7 3.9 2.8 2.9 2.6 3.7 2.5 2.4 2.3 3.7 2.5 2.4 2.3 mA(typ.) 7 4 8 uF % 84 87 220 87 87.5 84.5 86 100* 86.5 86.5 84 86.5 220 88.5 88 84.5 86 100* 88.5 87.5 84 86.5 220 87.5 87.5 83.5 86 100* 87 87 * For each output E-mail: [email protected] http://www.delta.com.tw/dcdc P1 Input Characteristics Parameter Input Surge Voltage (1 sec. max.) Input Voltage Range Reverse Polarity Input Current Input Filter Internal Power Dissipation Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models 12V Input Models 24V Input Models All Models Min. -0.7 -0.7 -0.7 4.5 10.8 21.6 ----- Typ. Max. --9 --18 --30 5 5.5 12 13.2 24 26.4 --0.3 Internal Capacitor --450 Unit VDC A mW Output Characteristics Parameter Conditions Min. Typ. Max. Dual Output, Balanced Loads --- ±0.1 ±1.0 % Line Regulation For Vin Change of 1% --- ±1.05 ±1.2 % Load Regulation Io=20% to 100% Output Voltage Balance Unit See Model Selection Guide Ripple & Noise (20MHz) --- 30 60 mV P-P Temperature Coefficient --- ±0.01 ±0.02 %/℃ Short Circuit Protection 0.5 Second Max. General Characteristics Parameter I/O Isolation Voltage (rated) Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V 40 60 120 pF 50 100 120 KHz 2,000,000 --- --- Hours Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Safety Approvals CSA 60950-1 recognition, IEC/EN 60950-1(CB-scheme) Recommended Outside Input Fuse 5V Input Models 12V Input Models 24V Input Models 500mA Slow-Blow Type 200mA Slow-Blow Type 100mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (without Derating) Conditions Min. Max. Unit Ambient -40 +85 ℃ ℃ Case Temperature --- +95 Storage Temperature Range -50 +125 ℃ Humidity (non condensing) --- 95 % rel. H 260 ℃ Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_PE01S/D_03152012 Free-Air convection --- E-mail: [email protected] http://www.delta.com.tw/dcdc P2 Output Voltage Tolerance Output Voltage(%) Output Power (%) Power Derating Curve +20% +20% +15% +15% +10% +10% Max. +5% +5% Typ. Vnom Vnom Min. -5% -5% -10% 0% 20% 40% 60% 80% -10% 100% Output Load Current (%) Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 3 Ripple & Noise measurement bandwidth is 0-20MHz. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. All DC/DC converters should be externally fused at the front end for protection. Specifications subject to change without notice. 4 5 DS_PE01S/D_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P3 Mechanical Drawing Mechanical Dimensions Pin Connections 10.2 [0.40] 3.2 [0.13] 0.5 [0.02] 19.5 [0.77] 0.5 [0.02] 2.35 [0.09] Pin Single Output Dual Output 1 +Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 No Pin Common 6 +Vout +Vout 5V & 12V Input : T=6.1[0.24] 24V Input : 2X2.54 2.54 5.08 [0.10] [0.20] [2X0.10] T=7.1[0.28] r 18.5 [0.73] ►All dimensions in mm (inches) T Bottom View 0.50 [0.02] 4 5 6 ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) 0.25 [0.01] 2 1.3 [0.05] 1 ► Pins ±0.05(±0.002) Physical Outline Case Size (5&12V Input) Case Size (24V Input) : 19.5x6.1x10.2mm (0.77x0.24x0.40 Inches) : 19.5x7.1x10.2mm (0.77x0.28x0.40 Inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Weight (5&12V Input) Weight (24V Input) : : 2.2g 2.6g DS_PE01S/D_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P4 Part Numbering System P E 01 S 05 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D- Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PE01S/D_03152012 E-mail: [email protected] http://www.delta.com.tw/dcdc P5