General Purpose Relays Miniature Power PCB Relay T7N / T7N-WG I 1pole 10 A, 1CO or 1NO contact I Version T7N-WG with tracking resistance CTI 325 I WG version: Product in accordance to IEC60335-1 I RoHS compliant (Directive 2002/95/EC) as per product date code 0424 Applications Domestic appliances, heating control, building control, measurement&control F0189-B Approvals V REG.-Nr. 6175, Z E214025; T7N-WG: V REG.-Nr. 119012, Z E214025 Technical data of approved types on request T7N: Contact data T7N Contact configuration 1 CO or 1 NO Contact set single contact Type of interruption micro-disconn. Rated current 10 A Rated voltage / max.switching voltage AC 240/400 VAC Maximum breaking capacity AC 2500 VA Limiting making capacity, max 4 s, duty factor 10% 35 A Contact material AgSnO2 / AgCdO Mechanical endurance 10x106 cycles Rated frequency of operation with / without load 30/300 min-1 Contact ratings Type Load T7N-WG CO (NO tested): 10 A, 250 V, 85 °C, resistive, EN61810-1 T7N-WG CO (NC tested),: 6 A, 250 V, 85 °C, resistive, EN61810-1 T7N (AgSnO2): 10 A, 250 V, 85 °C, resistive, EN61810-1 T7N (AgSnO2): 5 A, 250 V, 85 °C, resistive, EN61810-1 T7N (AgCdO): 5 A, 250 V, 85 °C, resistive, EN61810-1 Coil data Rated coil voltage range DC coil Coil power DC coil Operative range Non-release voltage, % of rated coil voltage Coil insulation system according UL1446 T7N-WG 1 CO or 1 NO single contact micro-disconn. 10 A 240/400 VAC 2500 va 35 A AgSnO2 10x106 cycles 30/300 min-1 Cycles 100x103 50x103 10x103 100x103 100x103 T7N T7N-WG 3...48 VDC typ. 360 mW 2 50% class F 5...48 VDC typ. 360 mW 2 50% class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 05 5 3.5 0.5 70+10% 357 06 6 4.2 0.6 100+10% 360 09 9 6.3 0.9 225+10% 360 12 12 8.4 1.2 400+10% 360 24 24 16.8 2.4 1600+10% 360 36 36 25.2 3.6 3600+10% 360 48 48 33.6 4.8 6400+10% 360 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Miniature Power PCB Relay T7N / T7N-WG (Continued) Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category T7N T7N-WG 2500 Vrms 1000 Vrms W 2/3 mm IIIa CTI 225 2500 Vrms 1000 Vrms W 2,5 / 3,5 mm IIIa CTI 325 basic functional 250 V 2 240 V II basic functional 250 V 2 240 V II T7N T7N-WG PCB layout / terminal assignment Bottom view on solder pins S0260-AA Other data RoHS - Directive 2002/95/EC compliant as per product date code 0424 Flammability class according to UL94 V0 V0 For WG version: GWFI to IEC 60695-2-12 850°C GWIT to IEC 60695-2-13 775°C Ambient temperature range -40...85°C -40...85°C Operate- / release time typ. 10/5 ms typ. 10/5 ms Vibration resistance (function) NO / NC contact >14 / 8 g, 30...400 Hz Shock resistance (destruction) 100 g 100 g Category of protection RTIII - wash tight RTII - flux proof (RTII - flux proof) RTIII - wash tight Mounting PCB PCB Resistance to soldering heat flux-proof version 270°C / 10 s 270°C / 10 s wash-tight version 260°C / 5 s 260°C / 5 s Relay weight 11 g 11 g Packaging unit 25/1000 pcs 25/1000 pcs S0260-AB S0260-AC Dimensions S0349-A Product key T 7 N Type Version S wash tight V flux proof Contact configuration 1 1 NO contact 5 1 CO contact Coil version H DC coil 450 mW D DC coil 360 mW Contact material 1 AgCdO 4 AgSnO2 Coil Coil code: please refer to coil versions table Version Blank T7N standard version, CTI 225 WG CTI 325 version, product in accordance with IEC 60335-1 WG-A CTI 325 for relay base only Other types on request 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Miniature Power PCB Relay T7N / T7N-WG (Continued) Product key T7NS1D4-05 T7NS1D4-06 T7NS1D4-09 T7NS1D4-12 T7NS1D4-24 T7NS1D4-36 T7NS1D4-48 T7NS5D4-05 T7NS5D4-06 T7NS5D4-09 T7NS5D4-12 T7NS5D4-24 T7NS5D4-36 T7NS5D4-48 T7NV1D4-05-WG T7NV1D4-06-WG T7NV1D4-09-WG T7NV1D4-12-WG T7NV1D4-24-WG T7NV1D4-36-WG T7NV1D4-48-WG T7NV5D4-05-WG T7NV5D4-06-WG T7NV5D4-09-WG T7NV5D4-12-WG T7NV5D4-24-WG T7NV5D4-36-WG T7NV5D4-48-WG T7NV1D4-05-WG-A T7NV1D4-06-WG-A T7NV1D4-09-WG-A T7NV1D4-12-WG-A T7NV1D4-24-WG-A T7NV1D4-36-WG-A T7NV1D4-48-WG-A T7NV5D4-05-WG-A T7NV5D4-06-WG-A T7NV5D4-09-WG-A T7NV5D4-12-WG-A T7NV5D4-24-WG-A T7NV5D4-36-WG-A T7NV5D4-48-WG-A Version wash tight CTI 225 Cont. material AgSnO2 Cont.configuration 1 NO contact 1 CO contact flux proof CTI 325 according IEC 60335-1 1 NO contact 1 CO contact flux proof relay base CTI 325 1 NO contact 1 CO contact Coil 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 36 VDC 48 VDC Part number 6-1440006-9 7-1440006-0 7-1440006-1 7-1440006-2 7-1440006-4 7-1440006-5 7-1440006-6 5-1440005-2 6-1440006-1 6-1440006-2 6-1440006-3 6-1440006-5 6-1440006-6 6-1440006-7 0-1649336-8 0-1649336-9 1-1649336-0 1-1649336-1 1-1649336-2 1-1649336-3 1-1649336-4 0-1649305-8 0-1649305-9 1-1649305-0 1-1649305-1 1-1649305-2 1-1649305-3 1-1649305-4 2-1649280-0 2-1649280-1 2-1649280-2 2-1649280-3 2-1649280-4 2-1649280-5 2-1649280-6 1-1649324-0 1-1649324-1 1-1649324-2 1-1649324-3 1-1649324-4 1-1649324-5 1-1649324-6 3 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.