General Purpose Relays Power PCB Relay RT1 sensitive I 1 pole 10 A, 1 CO or 1 NO contact I Highly sensitive version, coil power 250 mW I 5 kV / 10 mm coil-contact I Reinforced insulation I Ambient temperature 85°C at rated load I RoHS compliant (Directive 2002/95/EC) as per product date code 0413 Applications Domestic appliances, heating control F0145-B Approvals V REG.-Nr. 6106, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% Contact material Mechanical endurance Rated frequency of operation with / without load Contact Type RT174 RT174 RT174 RT174 RT174 RT184 RT174 RT174 1 CO or 1 NO single contact micro disconnection 10 A 240/400 VAC 2500 VA 15 A AgNi 90/10 > 30 x 106 cycles 50 / 1200 min-1 ratings Load 10 A, 250 VAC, CO contact, 85°C, EN61810-1 8 A, 250 VAC 370 W, 230 VAC, compressor 550 W, 250 VAC, incandescent lamps 0.8/0.08 A, 230 VAC, cosϕ=0,23, contactor 190/90 VA Pilot duty B300, R150, UL508 3/4hp @ 240 VAC, 1/3hp @ 120 VAC, NO contact, UL508 1/2hp @ 240 VAC, 1/4hp @ 120 VAC, CO contact, UL508 Cycles 100x103 430x103 >330x103 190x103 >8,8x106 6x103 Coil data Rated coil voltage range DC coil Coil power DC coil Operative range Coil Coil insulation system according UL1446 5...60 VDC typ 250 mW 2 class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW 005 5 3.7 0.5 100+10% 250 006 6 4.5 0.6 144+10% 250 +10% 012 12 9.0 1.2 576+ 250 +10% 024 24 18.0 2.4 2304+ 250 048 48 36.0 4.8 9216+10% 250 060 60 45.0 6.0 12857+12% 280 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power PCB Relay RT1 sensitive (Continued) Insulation PCB layout / terminal assignment Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category Bottom view on solder pins 5000 Vrms 1000 Vrms > 10 / 10 mm W IIIa PTI 250 V 10 A, pinning 3.5 mm reinforced functional 250 V 3 240/400 V III S0418-CB Other data RoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 Ambient temperature range -40...+85°C Operate- / release time typ 7 / 3 ms Bounce time NO / NC contact typ 2 / 4 ms Vibration resistance (function) NO / NC contact 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight Mounting pcb or on socket Mounting distance 0 mm Resistance to soldering heat flux-proof version 270°C / 10 s wash-tight version 260°C / 5 s Relay weight 14 g Packaging unit 20 / 500 pcs *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 1 CO contact S0163-BG 1 NO contact Accessories For details see datasheet Accessories Power Relay RT S0163-BH Dimensions S0272-BB Product key R T Type Version 1 10 A, pinning 3.5 mm, flux proof B Contact configuration 7 1 CO contact 8 Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Preferred types in bold print Product key RT174005 RT174006 RT174012 RT174024 RTB74012 RTB74024 Version 10 A pinning 3.5 mm flux proof 4 10 A, pinning 3.5 mm, wash tight 1 NO contact Contacts 1 CO contact Contact material AgNi 90/10 10 A, 3.5mm wash tight Coil 5 VDC 6 VDC 12 VDC 24 VDC 12 VDC 24 VDC Part number 3-1393239-6 3-1393239-7 3-1393239-8 3-1393239-9 4-1393238-4 4-1393238-6 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.