XC74UL4066 ETR1308_003a CMOS Logic ■DESCRIPTION XC74UL4066 is CMOS analog switch manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, gives way to high speed analog or digital signal switching. As the series is integrated into a mini molded, SSOT-25 package, high density mounting is possible. ■APPLICATIONS ■FEATURES ●Palmtops High Speed Operation : tpd = 2ns (TYP.) Operating Voltage Range : 2V ~ 5.5V ●Digital equipment Low Power Consumption : 1μA (MAX.) Low ON Resistance : 22Ω(TYP.) CMOS Logic Analog Switch Ultra Small Package ■PIN CONFIGURATION : SSOT-25 ■PRODUCT CLASSIFICATION ●Ordering Information PRODUCT NAME PACKAGE ORDER UNIT XC74UL4066NR SSOT-25 3,000/Reel SSOT-25 （TOP VIEW） ■LOGIC DIAGRAM ■FUNCTIONS CONTROL STATE L H OFF ON H=High level L=Low level 1/11 XC74UL4066 ■ABSOLUTE MAXIMUM RATINGS Ta=-40℃~85℃ PARAMETER SYMBOL RATINGS UNITS Supply Voltage Control Input Voltage Switch Output Voltage Control Input Diode Current Switch Output Diode Current Switch Output Current VCC,GND Current VCC VCONT VOUT IIK IOK IOUT ICC,IGND -0.5~+6.0 -0.5~+6.0 -0.5~VCC+0.5 -20 ±20 ±25 ±50 V V V mA mA mA mA Power Dissipation＊ Pd 150 mW Storage Temperature Range Tstg -65~+150 ℃ Voltage is all ground standardized. ＊Ta=25℃ ■RECOMMENDED OPERATING CONDITIONS CONDITIONS UNITS Supply Voltage PARAMETER SYMBOL VCC(V) VCC － 2~5.5 V Input Voltage VIN － 0~5.5 V Output Voltage VOUT － 0~VCC V Operating Temperature Range Topr ℃ Input Rise and Fall Time tr,tf － -40~+85 3.3 0~100 5.0 0~20 ns/V ■DC ELECTRICAL CHARACTERISTICS PARAMETER “High” Level Control Input Voltage” “Low” Level Control Input Voltage” Peak ON Resistance ON Resistance SYMBOL VIH VIL RONmax RON(1) VCC(V) CONDITIONS Ta=25℃ Ta=-40℃~85℃ MIN. TYP. MAX. MIN. MAX. 2.0 1.5 － － 1.5 － 3.0 2.1 － － 2.1 － 5.5 3.85 － － 3.85 － 2.0 － － 0.5 － 0.5 3.0 － － 0.9 － 0.9 5.5 － － 1.65 － 1.65 2.0 VCONT=VIH － 130 350 － 550 3.0 VIN=0~VCC － 22 50 － 65 4.5 IIN/OUT=1mA － 12 25 － 35 2.0 VCONT=VIH 23 50 3.0 VIN=GND or VCC 14 30 40 4.5 IIN/OUT=1mA 10 20 25 65 UNITS V V Ω Power Off Leak Current IS(OFF) 5.5 VCONT=VIL, VIN=VCC, VOUT=GND － － ±0.1 － ±1.0 μA Power On Leak Current IS(ON) 5.5 VCONT=VIH, VIN=VCC, OR GND － － ±0.1 － ±1.0 μA Control Input Current ICONT 5.5 VIN=VCC or GND － － ±0.1 － ±1.0 μA Static Supply Current ICC 5.5 VIN=VCC or GND － － 1.0 － 5.0 μA 2/11 XC74UL4066 ■SWITCHING ELECTRICAL CHARACTERISTICS PARAMETER Delay Time SYMBOL VCC(V) tPLH 2.0 tPHL 3.3 CONDITIONS Output Enable Time tZH tLZ tHZ Ta=-40℃~85℃ TYP. MAX. MIN. MAX. RL=10kΩ － 4 20 － 23 CL=50pF － 3 6 － 8 － 2 5 － 6 2.0 RL=1kΩ － 9 50 － 65 3.3 CL=50pF － 5 10 － 12 － 3 8 － 10 5.0 Output Disable Time Ta=25℃ MIN. 5.0 tZL (tr=tf=3ns) UNITS ns ns 2.0 RL=1kΩ － 12 60 － 75 3.3 CL=50pF － 10 23 － 27 － 8 20 － 25 － 0.05 － － － % － 200 － － － MHz － -60 － － － dB 5.0 ns RL=10kΩ Sine Wave Distortion Rate 3.0 CL=50pF fIN=1kHz RL=600kΩ, CL=50pF -3dB Band Width 3.0 VOUT 20log =- 3dB 10 VIN RL=600kΩ Feed Through 3.0 (Switch- off) fIN=1kHz Cross Talk (Control Switch) Maximum Control Input Frequency Control Input Capacitance CL=50pF CiN 2.0 RL=600kΩ － 60 － － － 3.0 CL=50pF － 100 － － － 4.5 fIN=1kHz － 150 － － － 2.0 RL=1kΩ － 30 － － － 3.0 CL=15pF － 30 － － － 4.5 VOUT=VCC/2 － 30 － － － － 5 10 － 10 － mV MHz pF Switch Input/Output Capacitance CIN/OUT － － 6 － － － pF Feed Through Capacitance CIN-OUT － － 0.5 － － － pF Power Dissipation Capacitance CPD － － 13 － － － pF Note: CPD is defined as the value of the internal equivalent capacitance which is derived from the operating supply current at times of "No Load". Ensure that the average operating supply current at times of "No Load" meets the following conditions: ICC (opr)=CPD･VCC･FIN+ICC 3/11 XC74UL4066 ■DELAY TIME ●WAVEFORM ●TEST CIRCUIT 4/11 XC74UL4066 ■OUTPUT ENABLE TIME, OUTPUT DISABLE TIME ●WAVEFORM ●TEST CIRCUIT 5/11 XC74UL4066 ■SINE WAVE DISTORTION RATE ■-3dB BAND WIDTH 6/11 XC74UL4066 ■FEED THROUGH TEST CIRCUIT ■CROSS TALK ●WAVEFORM ●TEST CIRCUIT 7/11 XC74UL4066 ■MAXIMUM CONTROL INPUT FREQUENCY ●WAVEFORM ●TEST CIRCUIT 8/11 XC74UL4066 ■ON RESISTANCE ■VOLTAGE DEPENDANCIES OF ON RESISTANCE 9/11 XC74UL4066 ■POWER OFF LEAK CURRENT ■POWER ON LEAK CURRENT 10/11 XC74UL4066 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd. 11/11