CMOS Logic Analog Switch/Multiplexer Operating Voltage Range : 2V ~ 5.5V High Speed Operation : tpd = 1.5ns TYP ■Applications Palmtops Digital Equipment Low Power Consumption : 2µ µA (max) Low ON Resistance : Ron=22Ω Ω TYP ■Description ■Features ML74UL4066MRG is an Analog Switch manufactured using silicon gate CMOS processes. The small quiescent current, which is one of the features of the CMOS logic, gives way to high speed operations which enables LS-TTL. With wave forming buffers connected internally, stabilized output can be achieved as the series offers high noise immunity. As the series is integrated into a mini molded, SOT-23-5 package, high density mounting is possible. High Speed Operation : tpd = 1.5ns TYP (Vcc=5V) Operating Voltage Range: 2V ~ 5.5V Low Power Consumption: 2µA (max) Low ON Resistance : 22Ω TYP Small Package : SOT-23-5 ■Pin Configuration ■Function Control State L H OFF ON H=High level L=Low level SOT-23-5 (TOP VIEW) ■Logic Diagram Rev. A, Oct 2005 ■ Absolute Maximum Ratings Ta=-40°C~85°C PARAMETER SYMBOL Power Supply Voltage Vcc Input voltage VCONT Output Voltage Vi/O Input Diode Current IIK Output Diode current IOK Switch Output Current Ii/O Vcc, GND Current ICC, IGND Power Dissipation (Ta=25°C) Pd Storage Temperature Tstg Note: Voltage is all Ground standardized. RATINGS UNITS -0.5 ~ +6.0 -0.5 ~ +6.0 -0.5 ~ Vcc +0.5 ±20 ±20 ±25 ±50 300 -65 ~ +150 V V V mA mA mA mA mW °C ■Recommended Operating Conditions PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage Input Voltage Output Voltage Operating Temperature Vcc VIN Vi/O Topr V V V °C Input Rise / Fall Time tr, tf 2 ~ 5.5 0 ~ 5.5 0 ~ Vcc -40 ~ +85 0 ~ 200 (Vcc=3.3V) 0 ~ 100 (Vcc=5V) ns ■DC Electrical Characteristics PARAMETER SYMBOL “High” Level Control Input Voltage VIH “Low” Level Control Input Voltage VIL Peak ON Resistance RONmax ON Resistance RON(1) Switch ON Resistance Differential ΔRON Power Off Leakage Current Power Off Leakage Current Control Input Current Quiscent Supply Current Vcc(V) 2.0 3.0 5.5 2.0 3.0 5.5 2.0 3.0 4.5 2.0 3.0 4.5 2.0 3.0 4.5 CONDITIONS IS(OFF) 5.5 IS(ON) 5.5 ICONT 0~5.5 VCONT=VIH VIN=0~Vcc IIN/OUT=1mA VCONT= VIH VIN= GND or Vcc IIN/OUT=1mA VCONT= VIH VIN=0~Vcc IIN/OUT=1mA VCONT= VIL, VIN= Vcc or GND VCONT= VIH, VIN= Vcc or GND VIN=Vcc or GND Icc 5.5 VIN=Vcc or GND MIN 1.5 2.1 3.85 - Ta=25°°C Ta=-40~85°°C TYP MAX MIN MAX 1.5 2.1 3.85 0.5 0.5 0.9 0.9 1.65 1.65 130 350 550 22 50 65 12 25 35 23 50 65 14 30 40 10 20 25 13 35 55 3 6 8 2 4 6 UNIT S V V Ω Ω Ω - - ±0.1 - ±1.0 µA - - ±0.1 - ±1.0 µA - - ±0.1 - ±1.0 µA - - 2.0 - 20.0 µA Rev. A, Oct 2005 ■Switching Electrical Characteristics Tr=tf=3ns PARAMETER SYMBOL CL 15pF Propagation Delay Time tPHL tPHL 50pF 15pF Output Enable Time tZL tZH 50pF 15pF Output Disable Time tLZ tHZ 50pF Vcc(V) 2.0 3.3 5.0 2.0 3.3 5.0 2.0 3.3 5.0 2.0 3.3 5.0 2.0 3.3 5.0 2.0 3.3 5.0 Sine Wave Distortion Rate 50pF 3.0 -3dB Band Width 50pF 3.0 CONDITIONS RL=1kΩ RL=1kΩ RL=1kΩ RL=1kΩ RL=10kΩ fIN=1kHz RL=600kΩ 20log10 VOUT=-3dB MIN - Ta=25°° C Ta=-40~85°°C TYP MAX MIN MAX 2.5 12 15 2 4 5.5 1.5 3 4 4 20 23 3 6 8 2 5 6 8.5 45 60 4.5 9 11 3.5 7.5 9 9 50 65 5 10 12 4 8.5 10 9 45 55 7 17 20 6 14 18 12 60 75 10 23 27 8 20 25 UNITS ns ns ns ns ns ns - 0.05 - - - % - 200 - - - MHz - -60 - - - dB - 60 100 150 -60 -60 -60 - - - VIN Feed Through (Switch-off) 50pF Cross Talk (Control Switch) 50pF Cross Talk (between Switches) 50pF Control Input Capacitance Switch Input/Output Capacitance Feed Through Capacitance Power Dissipation Capacitance 3.0 2.0 3.0 4.5 2.0 3.0 4.5 RL=600kΩ RL=600kΩ fCONT=1MHz RL=600kΩ fIN=1MHz mV dB CCONT - - - 5 10 - 10 pF CIN/OUT - - - 6 - - - pF CIN-OUT - - - 0.5 - - - pF Cpd - - - 13 - - - pF Rev. A, Oct 2005 ■ON Resistance ■Typical Application Circuit ■Voltage Dependancies of ON Resistance Rev. A, Oct 2005 ■ Power Off Leakage Current ■ Power On Leakage Current Rev. A, Oct 2005 ■Propagation Delay Time ■Typical Application Circuit ■Waveforms Rev. A, Oct 2005 ■Output Enable Time, Output Disable Time ■Typical Application Circuit ■Waveforms Rev. A, Oct 2005 ■Sine Wave Distortion Rate ■-3dB Band Width Rev. A, Oct 2005 ■Feed Through Test Circuit ■Cross Talk (Control Input Switch Output) ■Typical Application Circuit ■Waveforms Rev. A, Oct 2005 ■Cross Talk (Between Switches) ■Typical Application Circuit ■Waveforms DISCLAIMER: The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Rev. A, Oct 2005