Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 L Features: • • • • • • N Data rates to 250 kBaud 24” minimum 26 AWG wire leads Choice of output configuration Choice of opaque or IR-transmissive shell material Choice of aperture Choice of mounting configuration T Product Photo Here P Description: The OPB960, OPB970, OPB980 and OPB990 series of Photologic® photo integrated circuit switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting configurations. OPB960 through OPB973 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm) spacing. OPB980 through OPB993 have 24” (609 mm) 26 AWG wires. All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be specified as buffered or inverted with Totem-Pole or Open Collector output. Devices are also TTI/LSTTL compatible and can drive up to 10 TTL loads. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: • Mechanical switch replacement • Speed and direction indication • Mechanical limit indication • Rotary encoders • Edge sensing • Sliding Door Automotive and Liftgate applications Part Number Guide — OPB980 and OPB990 Series OPB 9 X X X X X Z OPTEK Assembly Photologic™ Pnoto Integrated Circuit Sensor Family Discrete Housing Material: 6 — Base mount IR transmissive plastic discrete shell with PCBoard lead termination 7 — Base mount opaque plastic discrete shell with PCBoar lead termination 8 — Base mount IR transmissive plastic discrete shell with wire termination 9 — Base mount opaque plastic discrete shell with wire termination Electrical Specifications: 0 — Buffered Totem-Pole Output 1 — Buffered Open-Collector Output 2 — Inverted Totem-Pole Output 3 — Inverted Open-Collector Output RoHS All PCBoard Versions RoHS Compliant: Z = Wire Version RoHS Compliant Sensor Aperture: 1 = 0.010” [0.25 mm] 5 = 0.050” [1.27 mm] Emitter Aperture: 1 = 0.010” [0.25 mm] 5 = 0.050” [1.27 mm] Mounting Configurations: L — Emitter side mounting tab only N — No mounting tabs P — Sensor-side mounting tab (Photologic side) T — Two mounting tabs OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 10/06 Page 1 of 7 Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 OP960, OP970 Series Color-Pin Description Red-1 Anode Black-2 Cathode Green-5 Ground Blue-4 Output White-3 Vcc OP980, OP990 Series DIMENSIONS ARE IN: [ MILLIMETERS] INCHES CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics. Applies to: OPB460, OPB470, OPB480, OPB490. OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. Issue B 10/06 Page 2 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 Totem Pole Output Totem-Pole-Output OpenOpen-Collector-Output Collector Output Inverted Output Series Inverted Totem-Pole Inverted Open Collector Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage Temperature Range -40°C to +85° C Operating Temperature Range -40°C to +70° C Supply Voltage VCC (not to exceed 3 seconds) 18 V Input Diode Power Dissipation 100 mW(1) Output PhotologicTM Power Dissipation 200 mW(2) Total Device Power Dissipation 300 mW(3) Voltage at Output Lead (Open Collector Output) 35V Diode Forward D.C. Current 40 mA Diode Reverse D.C. Voltage 2V Notes: (1) Derate linearly 2.22 mW/°C above 25° C. (2) Derate linearly 4.44 mW/°C above 25° C. (3) Derate linearly 6.66 mW/°C above 25° C. OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 10/06 Page 3 of 7 Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 Electrical Characteristics (TA = -40°C to + 70°C, VCC = 4.5V to 16.0V unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP240 for additional information) VF Forward Voltage - - 1.7 V IF = 20 mA, TA = 25° C IR Reverse Current - - 100 µA VR = 2.0 V, TA = 25° C Output Photologic® Sensor (See OPL560 series for additional information) VCC 4.5 - 16.0 V Peak-to-Peak VCC voltage ripple necessary to cause false triggering - - 2.0 V ICC Supply Current - 8 12 mA VOL Low Level Supply Voltage: Totem-Pole Open-Collector Inverted Totem-Pole Inverted Open-Collector - - 0.4 V VOH High Level Output Current: Totem-Pole Open-Collector Inverted Totem-Pole Inverted Open-Collector VCC-2.1 - - V IOH High Level Output Current: Totem-Pole Open-Collector Inverted Totem-Pole Inverted Open-Collector - - 100 µA VOH = 30 V, IF = 15 mA, TA = 25° C VOH = 30 V, IF = 15 mA, TA = 25° C VOH = 30 V, IF = 0 mA(5), TA = 25° C VOH = 30 V, IF = 0 mA(5), TA = 25° C LED Positive-Going Threshold Current - - 15 mA VCC = 5.0 V, TA = 25° C - 2.0 - V -15 - -60 mA VCC = 5.25 V, IF = 15 mA, VOH = GND VCC = 5.25 V, IF = 0 mA(5), VOH = GND VR(P-P) IF(+) Operating D.C. Supply Voltage IF(+), IF(-) Hysteresis f = DC to 50 MHz VCC = 4.5V to 16.0V IOL = 12.8 mA, IF = 0 mA IOL = 12.8 mA, IF = 0 mA IOL = 12.8 mA, IF = 15 mA(5) IOL = 12.8 mA, IF = 15 mA(5) IOH = -1 µA, IF = 15 mA IOH = -1 µA, IF = 15 mA IOH = -1 µA, IF = 0 mA(5) IOH = -1 µA, IF = 0 mA(5) VCC = 5.0 V IOS Short Circuit Output Current: Totem-Pole Inverted Totem-Pole trtr Output Rise Time, Output Fall Time - 70 - ns VCC = 5 V, TA = 25° C, IF = 0 or 15 mA Propagation Delay Low-High, Propagation High-Low - 5.0 - µs RL = 8TTL loads (Totem Pole), RL = 360 (Open-Collector) TPLH, TPHL Notes: (1) The OPB880/OPB890 series switches are terminated with 24” (609.600 mm) of 7-strand 26 AWG, UL 1429 insulated wire on each terminal. Insulation colors and functions are: Anode (red), cathode (black), VCC (white), output (blue), and ground (green). Custom wire lengths and/or colors are available. Contact your local representative or OPTEK for details. (2) Normal application would be with light source blocked, simulated by IF = 0 mA. (3) All parameters are tested using pulse techniques. OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. Issue B 10/06 Page 4 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 "55" Aperture - Flag Next to Emitter "55" Aperture - Flag Next to Sensor 1.2 1.2 Top to Bottom (Back) Top to Bottom (Back) Top to Bottom 1.0 1.0 0.8 0.8 Top to Bottom Right to Left Right to Left (Back) Logic Logic Right to Left 0.6 Right to Left (Back) 0.6 0.4 0.4 Left to Right Left to Right Left to Right (Back) Left to Right (Back) 0.2 0.2 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.0 0.00 0.05 Displacement Distance (inches) 0.10 0.15 0.20 0.25 Displacement Distance (inches) "55" Aperture - Flag in Middle of Slot 1.2 Top to Bottom (Back) Top to Bottom 1.0 0 Top to Bottom 0.8 Logic Right to Left Right to Left (Back) 0.6 Emitter Left to Right 0.4 Right to Left Left to Right Sensor Left to Right (Back) 0.2 0.0 0.00 0 0.05 0.10 0.15 0.20 Displacement Distance (inches) Width 0.25 OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 10/06 Page 5 of 7 Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 "51" Apertures - Flag Next to Emitter "51" Aperture - Flag Next to Sensor 1.2 1.2 Top to Bottom (Back) Top to Bottom Top to Bottom (Back) 1.0 1.0 0.8 0.8 Right to Left Right to Left Right to Left (Back) Logic Logic Top to Bottom 0.6 Right to Left (Back) 0.6 0.4 0.4 Left to Right Left to Right Left to Right (Back) Left to Right (Back) 0.2 0.2 0.0 0.00 0.0 0.05 0.10 0.15 0.20 Displacement Distance (inches) 0.25 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) "51" Aperture - Flag in Middle of Slot 1.2 Top to Bottom (Back) Top to Bottom 1.0 0 Top to Bottom 0.8 Logic Right to Left Right to Left (Back) 0.6 Emitter Left to Right 0.4 Right to Left Left to Right Left to Right (Back) Sensor 0.2 0 0.0 0.00 0.05 0.10 0.15 0.20 Width 0.25 Displacement Distance (inches) OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. Issue B 10/06 Page 6 of 7 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Photologic® Slotted Optical Switch OPB960, OPB970, OPB980, OP990 Series For parts built after 2004 "11" Aperture - Flag Next to Emitter "11" Aperture - Flag Next to Sensor 1.2 1.2 Top to Bottom Top to Bottom (Back) Top to Bottom (Back) 1.0 1.0 0.8 0.8 Right to Left Right to Left Right to Left (Back) Logic Right to Left (Back) Logic Top to Bottom 0.6 0.4 0.6 0.4 Left to Right Left to Right Left to Right (Back) Left to Right (Back) 0.2 0.0 0.00 0.2 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) 0.0 0.00 0.05 0.10 0.15 0.20 Displacement Distance (inches) 0.25 "11" Aperture - Flag in Middle of Slot 1.2 Top to Bottom (Back) Top to Bottom 1.0 0 Top to Bottom 0.8 Right to Left Logic Right to Left (Back) 0.6 Emitter Left to Right 0.4 Right to Left Left to Right Left to Right (Back) Sensor 0.2 0 Width 0.0 0.00 0.05 0.10 0.15 0.20 0.25 Displacement Distance (inches) OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 10/06 Page 7 of 7