Satellite Receiver RF Input Surge Protection Solution Products 2035-09-SM-RPLF Objective Compliance This solution is designed to offer surge protection to the RF input port from a set top box to a satellite dish. Near strikes or strikes to the building can damage the delicate RF port and the power supply which is fed to the dish. IEC 61000-4-5; 6 kV / 3 kA Benefit This solution provides a low height, high-current solution to exposed set top box applications Solution 1 GDT: 2035-09-SM-RPLF 1 TVS Diode: SMLJ20A SMLJ20A RF Input DC Supply 2035-09-SM-RPLF SMLJ20A The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. Design Kit PN-DESIGNKIT-37 Americas: Tel +1-951 781-5500 Fax +1-951 781-5700 Europe: Tel +41-(0)41 768 55 55 Asia-Pacific: Tel +886-2 256 241 17 Fax +41-(0)41 768 55 10 Fax +886-2 256 241 16 COPYRIGHT© 2012 • BOURNS, INC. • 6/12 • e/CPK1161 • “PortNote” is a registered service mark of Bourns, Inc. “Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries. Bourns® PortNote® solutions provide protection recommendations for typical port threats. For more information, go to: www.bourns.com or email: [email protected]