VHF/UHF Coaxial Port - ESD Protection Solution Products Objective Compliance This solution is designed to protect RF ports under 12 Vp-p in the VHF and UHF (30 MHz – 3000 MHz) from ESD events. IEC 61000-4-2 Level 4 (8 kV / 15 kV) This solution provides ESD protection without impairing VHF and UHF signals. Solution CG0402MLU-12G Benefit 1 ChipGuard® Device: CG0402MLU-12G RF in, 50 Ohm RF out RF Companion Products CG0402MLU-12G CS160808-68NK Multilayer Chip Inductor The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. Design Kit PN-DESIGNKIT 5 Americas: Tel +1-951 781-5500 Fax +1-951 781-5700 Europe: Tel +41-(0)41 768 55 55 Asia-Pacific: Tel +886-2 256 241 17 Fax +41-(0)41 768 55 10 Fax +886-2 256 241 16 COPYRIGHT© 2011 • BOURNS, INC. • 8/11 • e/CPK1028 • “PortNote” is a registered service mark of Bourns, Inc. “Bourns” and “ChipGuard” are registered trademarks of Bourns, Inc. in the U.S. and other countries. Bourns® PortNote® solutions provide protection recommendations for typical port threats. For more information, go to: www.bourns.com or email: [email protected]