TOSHIBA 2SA1924_06

2SA1924
TOSHIBA Transistor
Silicon PNP Triple Diffused Type
2SA1924
High-Voltage Switching Applications
•
High breakdown voltage: VCEO = −400 V
•
Low saturation voltage: VCE (sat) = −1 V (max)
Unit: mm
(IC = −100 mA, IB = −10 mA)
•
Collector metal (fin) is fully covered with mold resin.
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
−400
V
Collector-emitter voltage
VCEO
−400
V
Emitter-base voltage
VEBO
−7
V
DC
IC
−0.5
Pulse
ICP
−1
IB
−0.25
Collector current
Base current
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
PC
1.5
10
A
A
W
Tj
150
°C
Tstg
−55 to 150
°C
JEDEC
―
JEITA
―
TOSHIBA
2-8H1A
Weight: 0.82 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1
2006-11-09
2SA1924
Electrical Characteristics (Tc = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = −400 V, IE = 0
―
―
−10
μA
Emitter cut-off current
IEBO
VEB = −7 V, IC = 0
―
―
−1
μA
Collector-emitter breakdown voltage
VCEO
IC = −10 mA, IB = 0
−400
―
―
V
hFE (1)
VCE = −5 V, IC = −20 mA
140
―
450
hFE (2)
VCE = −5 V, IC = −100 mA
140
―
400
Collector-emitter saturation voltage
VCE (sat)
IC = −100 mA, IB = −10 mA
―
−0.4
−1.0
V
Base-emitter saturation voltage
VBE (sat)
IC = −100 mA, IB = −10 mA
―
−0.76
−0.9
V
VCE = −5 V, IC = −50 mA
―
35
―
MHz
VCB = −10 V, IE = 0, f = 1 MHz
―
18
―
pF
―
0.2
―
―
2.3
―
―
0.2
―
Transition frequency
fT
Collector output capacitance
Turn-on time
Cob
ton
Input
Storage time
tstg
IB1
Switching time
IB2
20 μs
IB1
IB2
Output
20 kΩ
DC current gain
μs
VCC = −200 V
Fall time
tf
IB1 = −10 mA, IB2 = 20 mA,
duty cycle ≤ 1%
Marking
Lot No.
A1924
Part No. (or abbreviation code)
A line indicates
lead (Pb)-free finish.
2
2006-11-09
2SA1924
IC – VCE
IC – VBE
−500
−500
−40
−20
−10
Common emitter
VCE = −5 V
−5
−80
(mA)
−400
−60
−2
Collector current IC
Collector current IC
(mA)
−100
−300
−1
−200
IB = −0.5 mA
−100
−400
−300
−200
Tc = 100°C
25
−55
−100
Common emitter
Ta = 25°C
0
0
−2
−4
−6
−8
0
0
−10 −12 −14 −16 −18 −20
Collector-emitter voltage VCE (V)
−0.2
−0.4
−0.6
−0.8
Collector-emitter voltage
hFE – IC
−1
−1.2
VBE (V)
VCE (sat) – IC
1000
−30
DC current gain hFE
Collector-emitter saturation voltage
VCE (sat) (V)
Common emitter
500
100
25
Tc = −55°C
100
50
30
10
Common emitter
5
VCE = −5 V
3
−1
−10
IC/IB = 10
−5
−3
−1
−0.5
25
−0.3
100
−0.1
Tc = −55°C
−0.05
−10
−100
Collector current IC
−0.03
−1
−1000
−10
(mA)
−100
−1000
Collector current IC
(mA)
Safe Operating Area
−3000
100 μs*
−1000
IC max (pulsed)*
300 μs*
(mA)
IC max (continuous)
VBE (sat) – IC
−300
Collector current IC
Base-emitter saturation voltage
VBE (sat) (V)
−10
Common emitter
−5
IC/IB = 10
−3
−1
−55
−0.3
−0.1
−1
1 ms*
−30
−10
25
−3
−10
Collector current IC
−100
−1
−1
−500
(mA)
10 ms*
−100
−0.5
Tc = 100°C
10 μs*
DC operation
Tc = 25°C
*: Single nonrepetitive
pulse Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
−3
−10
VCEO max
−30
−100
−300
−1000
Collector-emitter voltage VCE (V)
3
2006-11-09
2SA1924
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4
2006-11-09