2SA1680 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1680 Power Amplifier Applications Power Switching Applications • Unit: mm Low collector-emitter saturation voltage: VCE (sat) = −0.5 V (max) (IC = −1 A) • High collector power dissipation: PC = 900 mW (Ta = 25 °C) • High-speed switching: tstg = 300 ns (typ.) • Complementary to 2SC4408. Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −60 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −6 V Collector current IC −2 A Base current IB −0.2 A Collector power dissipation PC 900 mW Junction temperature Tj 150 °C Tstg −55 to 150 °C Storage temperature range JEDEC TO-92MOD JEITA TOSHIBA ― 2-5J1A Weight: 0.36 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2007-06-07 2SA1680 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = −60 V, IE = 0 ― ― −1.0 μA Emitter cut-off current IEBO VEB = −6 V, IC = 0 ― ― −1.0 μA V (BR) CEO IC = −10 mA, IB = 0 −50 ― ― V Collector-emitter breakdown voltage hFE (1) VCE = −2 V, IC = −100 mA 120 ― 400 hFE (2) VCE = −2 V, IC = −1.5 A 40 ― ― Collector-emitter saturation voltage VCE (sat) IC = −1 A, IB = −0.05 A ― ― −0.5 V Base-emitter saturation voltage VBE (sat) IC = −1 A, IB = −0.05 A ― ― −1.2 V VCE = −2 V, IC = −100 mA ― 100 ― MHz VCB = −10 V, IE = 0, f = 1 MHz ― 23 ― pF ― 0.1 ― ― 0.3 ― ― 0.1 ― Transition frequency fT Collector output capacitance Cob Turn-on time ton Storage time tstg IB1 Switching time Input IB2 20 μs IB2 IB1 Output 30 Ω DC current gain μs VCC = −30 V Fall time tf −IB1 = IB2 = 0.05 A, duty cycle ≤ 1% Marking A1680 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2007-06-07 2SA1680 −100 −50 (A) −20 −30 −70 Collector current IC hFE – IC DC current gain hFE IC – VCE −2.0 −1.6 −15 −10 −1.2 −6 500 300 100 50 30 10 Common emitter VCE = −2 V 5 −0.001 −0.003 −0.01 −0.03 −0.8 −4 −1 −2 −3 −4 −3 −1 −3 (A) VCE (V) VBE (sat) – IC −10 Common emitter −5 IC/IB = 20 Base-emitter saturation voltage VBE (sat) (V) −1 −0.5 −0.3 Ta = 100°C −0.1 −0.05 25 −25 −0.03 −3 Common emitter IC/IB = 20 Ta = −25°C −1 −0.5 25 100 −0.3 −0.1 −0.05 −0.03 ) Collector-emitter saturation voltage VCE (sat) (V) −3 −1 −5 VCE (sat) – IC −5 −0.3 Common emitter Ta = 25°C Collector-emitter voltage −10 −0.1 Collector current IC IB = −2 mA −0.4 0 0 Ta = 100°C 25 −25 −0.01 −0.001 −0.003 −0.01 −0.03 −0.1 −0.3 Collector current IC −1 −0.01 −0.001 −0.003 −0.01 −0.03 −3 −0.1 −0.3 Collector current IC (A) (A) Safe Operating Area IC – VBE −2.0 Common emitter −10 (A) −1.6 Collector current IC Collector current IC (A) VCE = −2 V −1.2 −0.8 Ta = 100°C 25 −25 −0.4 *: Single nonrepetitive pulse Ta = 25°C Curves must be derated linearly with increase in temperature. −5 IC max (pulsed)* 1 ms* −3 I max (continuous) C 10 ms* −1 100 ms* −0.5 −0.3 DC operation (Ta = 25°C) VCEO max −0.1 −0.05 0 0 −0.2 −0.4 −0.6 Base-emitter voltage −0.8 −1.0 −0.03 −0.1 −1.2 VBE (V) −0.3 −1 −3 Collector-emitter voltage 3 −10 −30 −100 VCE (V) 2007-06-07 2SA1680 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2007-06-07