TDK SLF7045

I
N
D
U
C
T
O
R
S
July 2013
Inductors for Power Circuits
Wound Ferrite
SLFseries
SLF6025
SLF6028
SLF6045
SLF7032
SLF7045
SLF7055
SLF10145
SLF10165
SLF12555
SLF12565
SLF12575
(2/49)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 30°C, Humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(3/49)
I
N
D
U
C
T
O
R
S
Inductors for Power Circuits
Product compatible with RoHS directive
Compatible with lead-free solders
Wound Ferrite
Overview of the SLF Series
FEATURES
Magnetic shield type wound inductor for power circuits.
Product lineup allows for various usages.
APPLICATION
Thin-screen TV, LCDs, AV equipment, gaming equipment, other electrical devices
PART NUMBER CONSTRUCTION
SLF
Series name
6025
L×W×H Dimensions
(mm)
6025
6.0×6.0×2.5
6028
6.0×6.0×2.8
6045
6.0×6.0×4.5
7032
7.0×7.0×3.2
7045
7.0×7.0×4.5
7055
7.0×7.0×5.5
10145 10.1×10.1×4.5
10165 10.1×10.1×6.8
12555 12.5×12.5×5.5
12565 12.5×12.5×6.5
12575 12.5×12.5×7.5
T
Packaging style
T
Taping
-
4R7
M
1R5
Inductance
(μH)
1R0
1.0
100
10
101
100
Inductance
tolerance
M
±20%
N
±30%
Rated current
(A)
R47
0.47
2R2
2.2
150
15
-
PF
Internal code
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Operating
Storage
Type
temperature
temperature
(pieces/reel)
（°C）
（°C）
SLF6025
–40 to +105
–40 to +105
1000
SLF6028
–40 to +105
–40 to +105
1000
SLF6045
–40 to +105
–40 to +105
1000
SLF7032
–40 to +105
–40 to +105
1000
SLF7045
–40 to +105
–40 to +105
1000
SLF7055
–40 to +105
–40 to +105
1000
SLF10145
–40 to +105
–40 to +105
500
SLF10165
–40 to +105
–40 to +105
500
SLF12555
–40 to +105
–40 to +105
500
SLF12565
–40 to +105
–40 to +105
500
SLF12575
–40 to +105
–40 to +105
500
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
Individual weight
（g）
0.3
0.3
0.4
0.4
0.6
0.8
1.3
1.9
2.6
3.2
3.6
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(4/49)
I
N
D
U
C
T
O
R
S
Overview of the SLF Series
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30s
Peak
Temp.
T4
250°C
Time
t3
5s
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(5/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF6025 Type
SHAPE & DIMENSIONS
2±0.1
6±0.2
4R7
6±0.2
4
0.9
2.5±0.2
0.9
Dimensions in mm
2.2
RECOMMENDED LAND PATTERN
1.5
4
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(6/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6025 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
4.7
6.8
10
15
22
33
47
68
100
Tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
100
DC resistance
( )±20%
0.0306
0.0442
0.0573
0.085
0.122
0.18
0.24
0.37
0.5
Rated current(A)
max.
Idc1
Idc2
1.5
1.8
1.3
1.5
1
1.3
0.88
1.1
0.73
0.94
0.59
0.79
0.48
0.67
0.42
0.54
0.33
0.47
Part No.
SLF6025T-4R7M1R5-PF
SLF6025T-6R8M1R3-PF
SLF6025T-100M1R0-PF
SLF6025T-150MR88-PF
SLF6025T-220MR73-PF
SLF6025T-330MR59-PF
SLF6025T-470MR48-PF
SLF6025T-680MR42-PF
SLF6025T-101MR33-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (30% below the nominal value)
Idc2: When based on the temperature increase (Temperature increase of 25°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(7/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6025 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
101M
680M
470M
Inductance(μH)
100
330M
220M
150M
100M
6R8M
10
1
4R7M
1
10
100
1000
Frequency(kHz)
10000
100000
1000000
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(8/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6025 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
300
Inductance(μH)
100
30
10
3
330M
220M
150M
100M
6R8M
4R7M
1
0.1
0.3
1
DC current(A)
3
10
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(9/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF6028 Type
SHAPE & DIMENSIONS
2±0.1
6±0.2
4R7
6±0.2
4
0.9
2.8±0.2
0.9
Dimensions in mm
2.2
RECOMMENDED LAND PATTERN
1.5
4
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(10/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6028 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
4.7
6.8
10
15
22
33
47
68
100
150
220
tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
100
100
100
DC resistance
( )±20%
0.0284
0.0354
0.0532
0.0745
0.104
0.148
0.21
0.29
0.43
0.65
0.98
Rated current(A)
max.
Idc1
Idc2
1.6
2.5
1.5
2.2
1.3
1.8
1
1.4
0.77
1.3
0.69
1.1
0.59
0.92
0.5
0.78
0.42
0.64
0.34
0.5
0.26
0.38
Part No.
SLF6028T-4R7M1R6-PF
SLF6028T-6R8M1R5-PF
SLF6028T-100M1R3-PF
SLF6028T-150M1R0-PF
SLF6028T-220MR77-PF
SLF6028T-330MR69-PF
SLF6028T-470MR59-PF
SLF6028T-680MR50-PF
SLF6028T-101MR42-PF
SLF6028T-151MR34-PF
SLF6028T-221MR26-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (30% below the nominal value)
Idc2: When based on the temperature increase (Temperature increase of 25°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(11/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6028 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
221M
151M
100
101M
Inductance(μH)
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
1
1
10
100
1000
Frequency(kHz)
10000
100000
1000000
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(12/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6028 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
221M
151M
100
101M
Inductance (μH)
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
1
0.0
0.5
1.0
1.5
2.0
2.5
DC current (A)
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(13/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF6045 Type
SHAPE & DIMENSIONS
2±0.1
6±0.2
4R7
6±0.2
4
0.9
4.5±0.3
0.9
Dimensions in mm
2.2
RECOMMENDED LAND PATTERN
1.5
4
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(14/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6045 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
1.5
2.2
3.3
4.7
6.8
10
15
22
Tolerance
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
DC resistance
(m )
16±30%
18±30%
21.5±30%
26.5±30%
33±30%
39±20%
59.5±20%
82±20%
Rated current(A)
max.
Idc1
4
3.3
2.8
2.4
2
1.6
1.3
1.1
Part No.
Idc2
4.1
3.8
3.4
3.2
2.8
2.7
2.'2
1.8
SLF6045T-1R5N4R0-3PF
SLF6045T-2R2N3R3-3PF
SLF6045T-3R3N2R8-3PF
SLF6045T-4R7N2R4-3PF
SLF6045T-6R8N2R0-3PF
SLF6045T-100M1R6-3PF
SLF6045T-150M1R3-3PF
SLF6045T-220M1R1-3PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(15/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6045 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
Inductance(μH)
100
220M
150M
100M
10
6R8N
4R7N
3R3N
2R2N
1
1R5N
1
10
100
1000
10000
Frequency(MHz)
100000
1000000
10000000
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(16/49)
I
N
D
U
C
T
O
R
S
SLF series SLF6045 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
Inductance(μH)
100
220M
150M
10
100M
6R8N
4R7N
3R3N
2R2N
1R5N
1
0
2
4
DC current(A)
6
8
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(17/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF7032 Type
SHAPE & DIMENSIONS
2±0.1
7±0.2
4R7
7±0.2
4.9
0.9
3.2±0.2
0.9
Dimensions in mm
2.2
RECOMMENDED LAND PATTERN
1.5
4.8
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(18/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7032 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
DC resistance
( )±20%
Rated current(A)
max.
Part No.
0.023
0.030
0.041
0.053
0.075
0.11
0.16
0.24
0.31
0.45
0.65
1.05
1.67
2.05
3.15
4.78
1.9
1.7
1.6
1.4
1.1
0.96
0.75
0.67
0.59
0.45
0.37
0.29
0.22
0.2
0.16
0.13
SLF7032T-3R3M1R9-2PF
SLF7032T-4R7M1R7-2PF
SLF7032T-6R8M1R6-2PF
SLF7032T-100M1R4-2PF
SLF7032T-150M1R1-2PF
SLF7032T-220MR96-2PF
SLF7032T-330MR75-2PF
SLF7032T-470MR67-2PF
SLF7032T-680MR59-2PF
SLF7032T-101MR45-2PF
SLF7032T-151MR37-2PF
SLF7032T-221MR29-2PF
SLF7032T-331MR22-2PF
SLF7032T-471MR20-2PF
SLF7032T-681MR16-2PF
SLF7032T-102MR13-2PF
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(19/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7032 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100000
10000
1000
102M
Inductance(μH)
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
1
10
100
Frequency(kHz)
1000
10000
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(20/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7032 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
1000
102M
681M
471M
331M
Inductance(μH)
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
0
0.5
1
1.5
DC current(A)
2
2.5
3
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(21/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF7045 Type
SHAPE & DIMENSIONS
2±0.1
7±0.2
4R7
7±0.2
4.9
0.9
4.5±0.3
0.9
Dimensions in mm
2.2
RECOMMENDED LAND PATTERN
1.5
4.8
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(22/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7045 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
1000
Tolerance
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
DC resistance
( )±20%
0.02
0.03
0.039
0.036
0.052
0.061
0.096
0.125
0.175
0.25
0.34
0.52
0.74
1.05
1.48
2.28
Rated current(A)
max.
Idc1
Idc2
2.5
2.3
2
2.1
1.7
1.74
1.3
1.78
1.1
1.53
0.9
1.34
0.82
1.09
0.75
0.92
0.6
0.77
0.5
0.65
0.4
0.55
0.33
0.45
0.25
0.37
0.22
0.31
0.2
0.27
0.14
0.25
Part No.
SLF7045T-3R3M2R5-PF
SLF7045T-4R7M2R0-PF
SLF7045T-6R8M1R7-PF
SLF7045T-100M1R3-PF
SLF7045T-150M1R1-PF
SLF7045T-220MR90-PF
SLF7045T-330MR82-PF
SLF7045T-470MR75-PF
SLF7045T-680MR60-PF
SLF7045T-101MR50-PF
SLF7045T-151MR40-PF
SLF7045T-221MR33-PF
SLF7045T-331MR25-PF
SLF7045T-471MR22-PF
SLF7045T-681MR20-PF
SLF7045T-102MR14-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(23/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7045 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
1000
102M
681M
471M
331M
Inductance(μH)
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
1
10
100
1000
Frequency(kHz)
10000
100000
1000000
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(24/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7045 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
1000
102M
681M
471M
331M
Inductance(μH)
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R8M
4R7M
3R3M
1
0
1
2
3
DC current(A)
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(25/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF7055 Type
SHAPE & DIMENSIONS
2±0.1
7±0.2
4R7
7±0.2
4.9
0.9
5.5±0.3
0.9
Dimensions in mm
2.2
RECOMMENDED LAND PATTERN
1.5
4.8
1.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(26/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7055 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
1.5
2.2
3.3
4.7
6.8
10
15
22
Tolerance
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
DC resistance
(m )
17.4±30%
21.7±30%
24±30%
28±30%
34±30%
39.1±20%
50.8±20%
64.3±20%
Rated current(A)
max.
Idc1
6.2
5.3
4.3
3.6
3
2.6
2.1
1.7
Part No.
Idc2
4
3.5
3.3
3.1
2.8
2.5
2.2
2
SLF7055T-1R5N4R0-3PF
SLF7055T-2R2N3R5-3PF
SLF7055T-3R3N3R3-3PF
SLF7055T-4R7N3R1-3PF
SLF7055T-6R8N2R8-3PF
SLF7055T-100M2R5-3PF
SLF7055T-150M2R1-3PF
SLF7055T-220M1R7-3PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(27/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7055 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
1000
Inductance(μH)
100
220M
150M
100M
6R8M
10
4R7N
3R3N
2R2N
1R5N
1
1
10
100
1000
Frequency(MHz)
10000
100000
1000000
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(28/49)
I
N
D
U
C
T
O
R
S
SLF series SLF7055 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
Inductance(μH)
100
220M
150M
10
100M
6R8M
4R7N
3R3N
2R2N
1R5N
1
0
1
2
3
DC current(A)
4
5
6
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(29/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF10145 Type
SHAPE & DIMENSIONS
100
3±0.1
10.1±0.3
10.1±0.3
6.1
2
4.5±0.3
2
Dimensions in mm
3.2
RECOMMENDED LAND PATTERN
2.5
5.6
2.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(30/49)
I
N
D
U
C
T
O
R
S
SLF series SLF10145 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
3.3
5.6
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Tolerance
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DC resistance
( )±20%
0.0161
0.0220
0.0364
0.0472
0.0591
0.0815
0.1
0.14
0.2
0.35
0.47
0.68
1.03
1.6
2.8
3.4
Rated current(A)
max.
Idc1
Idc2
4.9
3.7
3.8
3.2
3
2.5
2.4
2.2
2.1
1.9
1.6
1.7
1.4
1.5
1.2
1.3
1
1.1
0.79
0.81
0.65
0.7
0.54
0.58
0.47
0.47
0.38
0.38
0.32
0.29
0.22
0.26
Part No.
SLF10145T-3R3N3R7-PF
SLF10145T-5R6M3R2-PF
SLF10145T-100M2R5-PF
SLF10145T-150M2R2-PF
SLF10145T-220M1R9-PF
SLF10145T-330M1R6-PF
SLF10145T-470M1R4-PF
SLF10145T-680M1R2-PF
SLF10145T-101M1R0-PF
SLF10145T-151MR79-PF
SLF10145T-221MR65-PF
SLF10145T-331MR54-PF
SLF10145T-471MR47-PF
SLF10145T-681MR38-PF
SLF10145T-102MR29-PF
SLF10145T-152MR22-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(31/49)
I
N
D
U
C
T
O
R
S
SLF series SLF10145 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100000
10000
152M
1000
Inductance(μH)
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
5R6M
3R3N
1
1
10
100
1000
10000
100000
Frequency(kHz)
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(32/49)
I
N
D
U
C
T
O
R
S
SLF series SLF10145 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
152M
1000
102M
681M
471M
Inductance(μH)
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
5R6M
3R3N
1
0
1
2
DC current(A)
3
4
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(33/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF10165 Type
SHAPE & DIMENSIONS
100
3±0.1
10.1±0.3
10.1±0.3
6.1
2
6.5±0.3
2
Dimensions in mm
3.2
RECOMMENDED LAND PATTERN
2.5
5.6
2.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(34/49)
I
N
D
U
C
T
O
R
S
SLF series SLF10165 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
1.5
2.2
3.3
4.7
6.8
10
15
22
Tolerance
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
L measuring
frequency
(kHz)
100
100
100
100
100
100
100
100
DC resistance
(m )
6.7±30%
8.4±30%
9.6±30%
11.7±30%
14±30%
18.5±20%
27±20%
44.8±20%
Rated current(A)
max.
Idc1
10.7
8.9
7.8
6.1
4.6
4.1
3.1
2.7
Part No.
Idc2
6.8
6.3
5.8
4.7
4.3
3.8
3.1
2.4
SLF10165T-1R5N6R83PF
SLF10165T-2R2N6R33PF
SLF10165T-3R3N5R83PF
SLF10165T-4R7N4R73PF
SLF10165T-6R8N4R33PF
SLF10165T-100M3R83PF
SLF10165T-150M3R13PF
SLF10165T-220M2R43PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(35/49)
I
N
D
U
C
T
O
R
S
SLF series SLF10165 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
Inductance(μH)
1000
100
220M
150M
100M
6R8M
4R7N
10
3R3N
2R2N
1R5N
0
1
10
100
1000
10000
100000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(36/49)
I
N
D
U
C
T
O
R
S
SLF series SLF10165 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
Inductance(μH)
1000
100
220M
150M
10
100M
6R8N
4R7N
3R3N
2R2N
1
1R5N
0
5
10
DC current(A)
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(37/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF12555 Type
SHAPE & DIMENSIONS
100
3±0.1
12.5±0.3
12.5±0.3
8.5
2
5.5±0.3
2
Dimensions in mm
3.2
RECOMMENDED LAND PATTERN
2.6
8.5
2.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(38/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12555 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
6
10
15
22
33
47
68
100
150
220
330
470
680
1000
1500
Tolerance
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DC resistance
( )±20%
0.0164
0.0215
0.0259
0.0338
0.0415
0.0618
0.0832
0.117
0.19
0.27
0.41
0.52
0.76
1.12
1.73
Rated current(A)
max.
Idc1
Idc2
3.6
4.9
3.4
4.3
2.8
3.9
2.3
3.4
1.9
3.1
1.6
2.5
1.3
2.2
1.1
1.8
0.88
1.4
0.72
1.2
0.59
1
0.49
0.88
0.43
0.73
0.34
0.6
0.29
0.48
Part No.
SLF12555T-6R0N3R6-PF
SLF12555T-100M3R4-PF
SLF12555T-150M2R8-PF
SLF12555T-220M2R3-PF
SLF12555T-330M1R9-PF
SLF12555T-470M1R6-PF
SLF12555T-680M1R3-PF
SLF12555T-101M1R1-PF
SLF12555T-151MR88-PF
SLF12555T-221MR72-PF
SLF12555T-331MR59-PF
SLF12555T-471MR49-PF
SLF12555T-681MR43-PF
SLF12555T-102MR34-PF
SLF12555T-152MR29-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 30°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(39/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12555 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
100000
10000
152M
1000
Inductance(μH)
102M
681M
471M
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R0N
1
1
10
100
1000
10000
100000
Frequency(kHz)
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(40/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12555 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
10000
152M
1000
102M
681M
471M
Inductance(μH)
331M
221M
151M
100
101M
680M
470M
330M
220M
150M
10
100M
6R0N
1
0
1
2
DC current(A)
3
4
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(41/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF12565 Type
SHAPE & DIMENSIONS
100
3±0.1
12.5±0.3
12.5±0.3
6.5±0.35
2
8.5
2
Dimensions in mm
3.2
RECOMMENDED LAND PATTERN
2.6
8.5
2.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(42/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12565 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
2
4.2
7
10
15
22
33
47
68
100
220
Tolerance
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
1
1
1
1
1
1
1
1
1
1
1
DC resistance
( )±20%
0.0117
0.015
0.0177
0.0202
0.0237
0.0316
0.0406
0.0578
0.0787
0.123
0.273
Rated current(A)
max.
Idc1
Idc2
10
6.2
7.3
5.5
5.7
5
5
4.8
4.2
4.4
3.5
3.8
2.8
3.4
2.4
2.8
2
2.4
1.6
1.9
1
1.2
Part No.
SLF12565T-2R0N6R2-PF
SLF12565T-4R2N5R5-PF
SLF12565T-7R0N5R0-PF
SLF12565T-100M4R8-PF
SLF12565T-150M4R2-PF
SLF12565T-220M3R5-PF
SLF12565T-330M2R8-PF
SLF12565T-470M2R4-PF
SLF12565T-680M2R0-PF
SLF12565T-101M1R6-PF
SLF12565T-221M1R0-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(43/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12565 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
Inductance(μH)
1000
221M
100
101M
680M
470M
330M
220M
150M
10
100N
7R0N
4R2N
2R0N
1
1
10
100
1000
10000
100000
Frequency(kHz)
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(44/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12565 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
221M
100
101M
Inductance(μH)
680M
470M
330M
220M
150M
10
100N
7R0N
4R2N
2R0N
1
0
2
4
6
8
10
DC current(A)
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(45/49)
I
N
D
U
C
T
O
R
S
SLF series
SLF12575 Type
SHAPE & DIMENSIONS
100
3±0.1
12.5±0.3
12.5±0.3
7.5±0.35
2
8.5
2
Dimensions in mm
3.2
RECOMMENDED LAND PATTERN
2.6
8.5
2.6
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(46/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12575 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(μH)
1.2
2.7
3.9
5.6
6.8
10
15
22
33
47
68
100
150
220
Tolerance
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
L measuring
frequency
(kHz)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DC resistance
( )±20%
0.0069
0.0094
0.0104
0.0116
0.0131
0.0156
0.0184
0.0263
0.0395
0.0528
0.0778
0.125
0.175
0.258
Rated current(A)
max.
Idc1
Idc2
13
8.2
10
7
9
6.7
7.8
6.3
7.2
5.9
5.5
5.4
4.7
5
4
4
3.2
3.4
2.7
3
2
2.4
1.9
1.9
1.5
1.6
1.3
1.3
Part No.
SLF12575T-1R2N8R2-PF
SLF12575T-2R7N7R0-PF
SLF12575T-3R9N6R7-PF
SLF12575T-5R6N6R3-PF
SLF12575T-6R8N5R9-PF
SLF12575T-100M5R4-PF
SLF12575T-150M4R7-PF
SLF12575T-220M4R0-PF
SLF12575T-330M3R2-PF
SLF12575T-470M2R7-PF
SLF12575T-680M2R0-PF
SLF12575T-101M1R9-PF
SLF12575T-151M1R5-PF
SLF12575T-221M1R3-PF
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial value)
Idc2: When based on the temperature increase (Temperature increase of 40°C by self heating)
○ Measurement equipment
Measurement item
Product No.
L
4194A
DC resistance
VP-2941A
Rated current Idc1
4284A+42841A+42842C
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Panasonic
Agilent Technologies
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(47/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12575 Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
1000
Inductance(μH)
221M
151M
100
101M
680M
470M
330M
220M
150M
100M
10
6R8N
5R6N
3R9N
2R7N
1R2N
1
1
10
100
1000
10000
100000
Frequency(kHz)
○ Measurement equipment
Product No.
Manufacturer
4294A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(48/49)
I
N
D
U
C
T
O
R
S
SLF series SLF12575 Type
ELECTRICAL CHARACTERISTICS
INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH
1000
221M
151M
100
101M
Inductance(μH)
680M
470M
330M
220M
150M
10
100M
6R8N
5R6N
3R9N
2R7N
1R2N
1
0
2
4
6
DC current(A)
8
10
12
○ Measurement equipment
Product No.
Manufacturer
4284A+42841A+42842C
Agilent Technologies
＊ Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm
(49/49)
I
N
D
U
C
T
O
R
S
SLFseries
Packaging Style
REEL DIMENSIONS
E
Type
SLF6025
SLF6028
SLF6045
SLF7032
SLF7045
SLF7055
SLF10145
SLF10165
SLF12555
SLF12565
SLF12575
N
2.0±0.5
(1.0)
ø13.0±0.5
W1
16.4
16.4
16.4
16.4
16.4
16.4
24.4
24.4
24.4
24.4
24.4
W2
22.4
22.4
22.4
22.4
22.4
22.4
30.4
30.4
30.4
30.4
30.4
N
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
ø50
E
2
2
2
2
2
2
2
2
2
2
2
* These values are typical values.
W1
ø21.0±0.8
A
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
W2
A
Dimensions in mm
TAPE DIMENSIONS
P2
P0
K
P1
t
A
Type
SLF6025
SLF6028
SLF6045
SLF7032
SLF7045
SLF7055
SLF10145
SLF10165
SLF12555
SLF12565
SLF12575
A
6.4
6.4
6.4
7.4
7.4
7.4
10.5
10.5
13
13
13
B
6.4
6.4
6.4
7.6
7.6
7.6
10.5
10.5
13
13
13
øD0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
1.5+0.1/-0
B
W
F
E
øD0
E
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
1.75±0.1
F
7.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
P0
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
Dimensions in mm
P1
12.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
P2
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
W
16.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
K
3.1
3.1
4.9
3.6
4.8
5.5
5.0
7.1
6.0
7.0
8.0
t
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.34
0.34
• All specifications are subject to change without notice.
001-01 / 20130731 / inductor_commercial_power_slf_en.fm