Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : Datum / Date : 82 306 050 029 SMD size: 0603 0603 ESD ULTRA LOW CAP TVS 2007-01-24 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE (Unit : mm) SISE 402 603 805 1206 1210 1812 2220 W 0.5 0.8 1.25 1.6 2.5 3.2 5.0 L 1.0 1.6 2.0 3.2 3.2 4.5 5.7 T 0.6 0.9 1.2 1.5 1.5 2.0 2.5 a 0.25 0.3 0.3 0.5 0.5 0.5 0.5 B Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number 82306050029S1 Working Voltage DC Max. Clamping Voltage V (*1) Trigger Voltage V Leakage Current µA (*2) ESD Pulse Withstand 5 30 typ. 150 0.01 >100 * 1 Max. Clamping Voltage at 8/20 waveformand 1 A pulse current * 2 Leakage Current at max operating voltage, the max leakage current was measured at reliability test * 3. ESD Typ. Withstands Voltage design and method guarantee this property Capacitance/Frequency ESD Voltage air discharge kV (*3) Capacitance pF +/-15 0.2 Capacitance measured at: 1MHz DC to & 1.8 GHz Design and Specifications are subject to change without notice REFERENCE DATA Response time Trise Operating ambientg temperature Storage temperature Max. temperature solder OTHER DATA Body End termination Packaging Complies with Standard Procedure Marking < 1 ns -40～+85 -50～+125 260/10s ℃ ℃ ℃ ZnO Ag/Ni/Sn Reel IEC61000-4-2 Solgel None Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 82 306 050 029 SMD size: 0603 0603 ESD ULTRA LOW CAP TVS C Lötpad / soldering spec. : RECOMMENDED SOLDER PAD LAYOUT SISE 402 603 805 1206 1210 1812 2220 3220 A 0.4~0.6 0.8~1.2 1.0~1.5 1.8~2.5 1.8~2.5 2.5~3.5 3.5~4.6 5.2~6.4 B 1.0~1.8 1.7~3.0 2.1~3.8 3.0~5.8 3.2~6.1 4.0~7.3 5.0~8.5 9.5~10.8 (Unit : mm) C 0.6~0.7 1.2~1.6 1.5~2.1 1.8~2.6 2.8~3.8 3.3~4.5 5.2~6.2 5.6~6.0 D 0.6~1.2 0.9~1.8 1.1~2.3 1.2~3.3 1.3~3.5 1.5~3.8 1.5~3.9 2.0~2.8 1 - The solder paste shall be printed in a thickness of 150 to 200μm. 2 - The SIR test of the solder paste shall be done（Based on JIS-Z-3284） 3 - IR reflow Pb Free Process suggestin profile (Based on J-STD-020-C): Rapid heating, partial heating or rapid cooling will easily cause defect of the component. So preheating and gradual cooling process is suggested. IR soldering has the highest yields due to controlled heating rates and solder liquidus times. Make sure that the element is not subjected to a thermal gradient steeper than 3 degrees per second. 2 degrees per second is the ideal gradient. During the soldering process, pre- heating to within 175 degrees of the solders peak temperature is essential to minimize thermal shock. 4 - Soldering recommend paste is Sn 96.5/Ag 3.5 250 Temperature (°C) - Preheat 1.The temperature rising speed is suggested to be 2~3℃/s. 2.Appropriate preheat time will be from 60 to 120 seconds. 3.Temp. maintain at 175 +/-25°C 120 seconds. - Heating 1.Careful about sudden rise in temperature as it may worsen the solder ability. 2.Set the peak temperature in 235℃10-20s or 260°C 3-10s. - Cooling 1.Ramp down rate 6°C/s max. Peak Temp. 260°C (3 to 10sec) 275 225 200 175 125 Peak Temp. 175°C (60 to 120sec) 100 75 25 ※Perform adequate test in advance as the reflow temperature profile will vary according to the conditions of the manufacturing process, and the specification of the reflow furnace 01:00:00 275 03:00:00 04:00:00 03:00:00 04:00:00 Time (mn) Temperature (°C) 250 225 200 175 150 125 100 5 - Hand Soldering Process Preheating 150°C Temperature of soldering iron tip 380°C max. 3 to 5 sec The Varistorrs shall be cooled gradually at room ambient temperature 02:00:00 Peak Temp. 260°C (3 to 10sec) 4 - Wave Soldering Process Ramp-up rate 3°C/s max. Temp. maintain at 175 +/-25°C 180 seconds max. Peak temperature 260°C 3-10s. Ramp down rate 6°C/s max. to thermal shock, a preheat is recommended in the soldering process. and the peak temperature should be under controlled rigidly in the solder process. Peak Temp. 245°C (10 to 20sec) 150 75 Preheat. 175°C 150sec max. 25 01:00:00 02:00:00 Time (mn) 6 - Ultrasonic cleaning For preventing failures or damages. Frequency 29MHz max - radied Power 20W/l max - Period 5mn max Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 82 306 050 029 SMD size: 0603 0603 ESD ULTRA LOW CAP TVS D Rollenspezifikation / tape and reel specification : 1 - Carrier tape and transparent cover tape should be heat-sealed to carry the products, and the reel should be used to reel the carrier tape. 2 - The adhesion of the heat-sealed cover tape shall be 40 ﹢20/ ﹣15grams. 3 - Both the head and the end portion of the taping shall be empty for reel package and SMT auto-pickup machine. And a normal paper tape shall be conected in the head of taping for the operator to handle. (Unit : mm) TAPE SPECIFICATION Symbol (Unit : mm) A0 B0 K0 T2 T D0 D1 P1 P2 P0 W E F ±0.10 ±0.10 ±0.10 ±0.05 ±0.05 +0.10 ±0.05 ±0.10 ±0.05 ±0.05 ±0.20 ±0.10 ±0.05 402 0.85 1.25 0.65 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 603 1.05 1.88 0.95 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 805 1.42 2.30 1.04 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1206 1.88 3.50 1.27 0.2 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1210 2.18 3.46 1.45 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1812 3.66 4.95 1.74 0.25 0.10 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 2220 5.10 5.97 2.80 0.25 0.10 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 -0.00 Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 82 306 050 029 SMD size: 0603 0603 ESD ULTRA LOW CAP TVS D Rollenspezifikation / tape and reel specification : (Unit : mm) REEL DIMENSION Symbol 402 603 805 1206 1210 1812 2220 (Unit : mm) A 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 B 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 C 13.0±0.2 13.0±0.2 13.0±0.2 13.0±0.2 13.0±0.2 13.5±0.1 13.5±0.1 D 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 E 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 W 9.0±0.50 9.0±0.50 9.0±0.50 9.0±0.50 9.0±0.50 13.6±0.2 13.6±0.2 W1 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 * 2.0 mm for 361 and 391 * 2.5 mm for 431 and 471 QUANTITY PER PACKING UNIT Type Pcs/reel 402 10 000 603 5 000 805 3 000 1206 3 000 1210 2 000 1812 1 000 2220 1 000 Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 82 306 050 029 SMD size: 0603 0603 ESD ULTRA LOW CAP TVS E Testbedingungen / test conditions : BASIC TEST Characteristics Test Method/Description Standard Test Condition Environmental condition under which every measuring is done without doubt on the measuring results. Unless specially specified, temperature, relative humidity are 5 to 35℃, 45 to 85﹪RH. Max. Working Voltage Maximum steady-state DC operating voltage the device can maintain and typical leakage current at 25℃ not exceed 50 μA. Varistor Voltage With the specified measuring current of 1mA DC applied. Max. Clamping Voltage Maximum peak voltage across the TVS measured at a specified pulse current（A）and waveform 8/20μs. Surge Current Maximum peak current which may be applied with the specified waveform 8/20μs without device failure. Surge Shift △V/V The shift of TVS voltage after suffering the specified surge current. Energy Absorption Maximum energy which may be dissipated with a specified waveform 10/1000μs.without device failure. Typical Capacitance Leakage Current Device Capacitance measured with zero voltage bias 0.5VRMS and 1KHZ Typical leakage current at 25℃＜50μA ENVIRONMENTAL RELIABILITY TEST Characteristic High Temperature Storage Temperature Cycle High Temperature Load Damp Heat Load/Humidity Load Test method and description The specimen shall be subjected to 150 ± 2℃ for 1000 ± 12 hours in a thermostatic bath without load and then stored at room temperature and humidity for 1 to 2 hours. The change of varistor voltage shall be within 10 ﹪. The temperature cycle of specified temperature shall be repeated five times and then stored at room temperature and humidity for one or two hours. the change of varistor voltage shall be within 10 ﹪and mechanical damage shall be examined. Step Temperature Period 1 -40±3℃ 30Min±3 Room 2 Temperature 1~2 hours 3 125±2℃ 30Min±3 4 Temperature 1~2 hours After being continuously applied the maximum allowable voltage at 85 ± 2℃ for 1000± 2 hours, the specimen shall be stored at room temperature and humidity for one or two hours, the change of varistor voltage shall be within 10﹪. The specimen should be subjected to 40 ± 2℃, 90 to 95 ﹪RH environment , and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and humidity for one or two hours. the change of varistor voltage shall be within 10﹪ The specimen should be subjected to 40 ± 2℃, without load for 1000 hours and then stored at room temperature for one or two hours. the change of varistor voltage shall be within 10 ﹪ Low Temperature Storage Freigabe erteilt / general release: Kunde / customer Datum / date Unterschrift / signature Würth Elektronik Geprüft / checked 2006-07-31 Kontrolliert / approved JP. Penlou JP. PENLOU High Temperature Load 06-07-31 JP. PENLOU New P/N 2006-06-02 JP. PENLOU Operating temp. Range 2005-11-30 JP. PENLOU Lead free soldering 2005-11-04 Name Änderung / modification Datum / date Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com