Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : Datum / Date : 823 56 050 560 SMD size: 0603 0603 ESD Suppressor 2006-10-15 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE (Unit : mm) SISE 0201 0402 0603 0805 1206 1210 1812 2220 W 0.3 0.5 0.8 1.25 1.6 2.5 3.2 5.0 L 0.6 1.0 1.6 2.0 3.2 3.2 4.5 5.7 T 0.3 0.6 0.9 1.2 1.5 1.5 2.0 2.5 a 0.15 0.25 0.3 0.3 0.5 0.5 0.5 0.5 B Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number 823 56 050 560 * * * * Working Voltage DC Max. Clamping Voltage V (*1) Typ. Clamp. V V (*2) Leakage Current µA (*3) ESD Pulse Withstand 5 55 - 1 - 1 Max. Clamping Voltage at 8/20 waveformand 1 A pulse current 2 Typ. Clamping Voltage per 8 kV ESD contact discharge method 3 Leakage Current at max operating voltage, the max leakage current was measured at reliability test 4. ESD Typ. Withstands Voltage design and method guarantee this property ESD Voltage air discharge kV (*4) Capacitance pF +/-15 56 Capacitance tolerance: Capacitance measured at: +/-30% 1MHz WAVE FORM ESD LEVEL IEC61000-4-2 Severity Level Air Discharge 1 2 kV 2 4 kV 8 kV 3 15 kV 4 Special 5 REFERENCE DATA Response time Trise Operating ambientg temperature Storage temperature Max. temperature solder OTHER DATA Body End termination Packaging Complies with Standard Procedure Marking Direct Discharge 2 kV 4 kV 6 kV 8 kV Special < 1 ns -40～+85 -50～+125 260/10s ℃ ℃ ℃ ZnO Ag/Ni/Sn Reel IEC61000-4-2 Solgel None Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com PAGE/SEITE 1 - TO/VON 4 Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 823 56 050 560 SMD size: 0603 0603 ESD Suppressor C Lötpad / soldering spec. : RECOMMENDED SOLDER PAD LAYOUT SISE 0201 0402 0603 0805 1206 1210 1812 2220 A 0.25 0.4 ~ 0.6 0.8 ~ 1.2 1.0 ~1.5 1.8 ~2.5 1.8 ~2.5 2.5 ~3.5 3.5 ~4.6 B 0.32 1.0 ~1.8 1.7 ~3.0 2.1 ~3.8 3.0 ~5.8 3.2 ~6.1 4.0 ~7.3 5.0 ~8.5 (Unit : mm) C 0.85 0.6 ~0.7 1.2 ~1.6 1.5 ~2.1 1.8 ~2.6 2.8 ~3.8 3.3 ~4.5 5.2 ~6.2 D 0.3 0.6 ~1.2 0.9 ~1.8 1.1 ~2.3 1.2 ~3.3 1.3 ~3.5 1.5 ~3.8 1.5 ~3.9 1 - The solder paste shall be printed in a thickness of 150 to 200µm. 2 - The SIR test of the solder paste shall be done（Based on JIS-Z-3284） 3 - IR reflow Pb Free Process suggestin profile (Based on J-STD-020-C): Rapid heating, partial heating or rapid cooling will easily cause defect of the component. So preheating and gradual cooling process is suggested. IR soldering has the highest yields due to controlled heating rates and solder liquidus times. Make sure that the element is not subjected to a thermal gradient steeper than 3 degrees per second. 2 degrees per second is the ideal gradient. During the soldering process, pre- heating to within 175 degrees of the solders peak temperature is essential to minimize thermal shock. 4 - Soldering recommend paste is Sn 96.5/Ag 3.5 Peak Temp. 260°C (3 to 10sec) 275 250 Temperature (°C) - Preheat 1.The temperature rising speed is suggested to be 2~3℃/s. 2.Appropriate preheat time will be from 60 to 120 seconds. 3.Temp. maintain at 175 +/-25°C 120 seconds. - Heating 1.Careful about sudden rise in temperature as it may worsen the solder ability. 2.Set the peak temperature in 235℃10-20s or 260°C 3-10s. - Cooling 1.Ramp down rate 6°C/s max. 225 200 175 125 Peak Temp. 175°C (60 to 120sec) 100 75 25 ※Perform adequate test in advance as the reflow temperature profile will vary according to the conditions of the manufacturing process, and the specification of the reflow furnace 01:00:00 02:00:00 03:00:00 04:00:00 Time (mn) Peak Temp. 260°C (3 to 10sec) 275 250 Temperature (°C) 4 - Hand Soldering Process Preheating 150°C Temperature of soldering iron tip 380°C max. 3 to 5 sec The Varistorrs shall be cooled gradually at room ambient temperature Peak Temp. 245°C (10 to 20sec) 150 225 200 5 - Ultrasonic cleaning 175 For preventing failures or damages. Frequency 29MHz max - radied Power 20W/l max - Period 5mn max 150 125 100 75 Preheat. 175°C 150sec max. 25 01:00:00 02:00:00 03:00:00 04:00:00 Time (mn) Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com PAGE/SEITE 2 - TO/VON 4 Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 823 56 050 560 SMD size: 0603 0603 ESD Suppressor D Rollenspezifikation / tape and reel specification : 1 - Carrier tape and transparent cover tape should be heat-sealed to carry the products, and the reel should be used to reel the carrier tape. 2 - The adhesion of the heat-sealed cover tape shall be 40 ﹢20/ ﹣15grams. 3 - Both the head and the end portion of the taping shall be empty for reel package and SMT auto-pickup machine. And a normal paper tape shall be conected in the head of taping for the operator to handle. (Unit : mm) TAPE SPECIFICATION Symbol (Unit : mm) A0 B0 K0 T2 T D0 D1 P1 P2 P0 W E F ±0.10 ±0.10 ±0.10 ±0.05 ±0.05 +0.10 ±0.05 ±0.10 ±0.05 ±0.05 ±0.20 ±0.10 ±0.05 0201 0.38 0.68 0.44 0.22 ‘- 1.50 ‘- 2.00 2.00 4.00 8.00 1.75 3.50 0402 0603 0.85 1.25 0.65 0.22 0.10 1.50 1.00 2.00 2.00 4.00 8.00 1.75 3.50 1.05 1.88 0.95 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 0805 1.42 2.30 1.04 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1206 1.88 3.50 1.27 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1210 2.18 3.46 1.45 0.22 0.10 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1812 3.66 5.10 4.95 5.97 1.74 2.80 0.25 0.25 0.10 0.10 1.50 1.50 1.50 1.50 8.00 8.00 2.00 2.00 4.00 4.00 12.00 12.00 1.75 1.75 5.50 5.50 -0.00 2220 Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com PAGE/SEITE 3 - TO/VON 4 Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 823 56 050 560 SMD size: 0603 0603 ESD Suppressor D Rollenspezifikation / tape and reel specification : (Unit : mm) REEL DIMENSION Symbol 0201 0402 0603 0805 1206 1210 1812 2220 (Unit : mm) A 178.0±2.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 178.0±1.0 B 50.0 min 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 60.0±0.5 C 13.0±0.5 13.0±0.2 13.0±0.2 13.0±0.2 13.0±0.2 13.0±0.2 13.5±0.1 13.5±0.1 D 21.0±0.8 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 21.0±0.2 E 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 2.0±0.5 W 9.0±0.50 9.0±0.50 9.0±0.50 9.0±0.50 9.0±0.50 9.0±0.50 13.6±0.2 13.6±0.2 W1 1.5 max 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 1.5±0.15 QUANTITY PER PACKING UNIT Type Pcs/reel 0201 15 000 0402 10 000 0603 4 000 0805 3 000 Freigabe erteilt / general release: Kunde / customer Datum / date Unterschrift / signature Würth Elektronik Geprüft / checked 2006-07-31 Kontrolliert / approved 1206 3 000 JP. Penlou 1210 2 000 1812 1 000 2220 1 000 JP. PENLOU Update Clamping Voltage 06-10-15 JP. PENLOU High Temperature Load 06-07-31 JP. PENLOU New P/N 06-06-02 JP. PENLOU Operating temp. Range 05-11-30 JP. PENLOU Lead free soldering 05-11-04 Name Änderung / modification Datum / date Würth Elektronik eiSos GmbH & Co.KG - Radialex department D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com PAGE/SEITE 4 - TO/VON 4